LEAD-TIME REDUCTION IN - PowerPoint PPT Presentation

1 / 29
About This Presentation
Title:

LEAD-TIME REDUCTION IN

Description:

LEAD-TIME REDUCTION IN MILITARY LOGISTICS By Yunus Emre KARAMANOGLU Content: Introduction Military logistics and Commercial logistics Literature review Importance of ... – PowerPoint PPT presentation

Number of Views:2414
Avg rating:3.0/5.0
Slides: 30
Provided by: ie69
Category:

less

Transcript and Presenter's Notes

Title: LEAD-TIME REDUCTION IN


1
LEAD-TIME REDUCTION IN MILITARY
LOGISTICS By Yunus Emre KARAMANOGLU
2
Content
  • Introduction
  • Military logistics and Commercial logistics
  • Literature review
  • Importance of Lead-Time in Military
  • The Model Used in Turkish Army
  • Question Answers

3
Introduction
  • The dictionary defines logistics as the branch of
    military science having to do with moving,
    supplying and quartering troops.
  • These definitions imply that logistics involves
    the care and feeding of combat forces and is
    supported by significant calculations.

4
Introduction
  • Logistics and lead-time reduction are very
    important topics especially in battlefield.
  • BECAUSE
  • If military logistics is done well, it is a
    significant combat multiplier.
  • If it is not done well, it can lead to
    disaster.
  • There is an old say
  • For want of the nail a shoe was lost, for
    want of a shoe the horse was lostultimately, the
    war was lost, all for want of a nail.

5
Military and Commercial Logistics
  • Military logistics and commercial logistics are
    parts of the same industry.
  • Both are concerned with
  • Focused Logistics,
  • Precision and Velocity,
  • Coordinated Delivery Schedules,
  • Fast and Flexible Distribution,
  • Good Infrastructure and Equipment at DCs.

6
Military and Commercial Logistics
The military supply chain management system looks
at

7
Military and Commercial Logistics
Military and Commercial readiness
(realizing optimal procurement, supply,
maintenance and distribution times) can be
defined as the optimization of available
resources to operate in a possible unforeseen
event.
A through assessment of supplies, resources and
manpower are needed to be matched with the needs
of the unforeseen event under surge
circumstances.
8
Military and Commercial Logistics
Whether for deployment or other emergency
situations such as natural disasters, army has to
be equipped with the best readiness resources.
To do so requires the achievement of these
national goals
  • a) Standardization of commercial and military
    logistics metrics and equipment,
  • b) Real-time stock-age information (It is
    important to have the most current supply
    status),
  • c) Minimal customer wait time.

9
Military and Commercial Logistics
  • The price of military components is so high that
    forward stocking all the possible parts needed is
    not be realistic.
  • What may benefit the military is the use of
    technology to signal when supplies from the
    authorized stockage lists reach a low point so
    that the parts can be delivered reliably to
    forward support activities.

10
Literature Review
  • Coleman and Abrams (1961) considered a
    mathematical model for operational readiness.
    They developed an operational-readiness model in
    terms of military-type equipment, which includes
    uncertain test results and failures caused by
    testing.
  • Denicoff et al. (1967) considered the problem
    of ranking items according to their worth, where
    each item has associated with it a vector of
    attributes.
  • Gross and Soriano (1969) considered the effect
    of reducing lead time on inventory levels and
    used a simulation analysis for this problem.
  • Levin and Friedman (1982) addressed the
    problem of how to deploy military support units
    to achieve maximum effectiveness which is
    similar to a multi-period warehouse location
    model.

11
Literature Review
  • Pyke (1990) presented a simulation study for a
    two-echelon system for repairable parts for
    electronic equipment on military aircrafts.
  • Moinzadeh and Schmidt (1991) investigated the
    use of emergency replenishments for a
    single-echelon model with deterministic
    lead-times.
  • Schrady and Wadsworth (1991) considered the
    level and seriousness of the interactions between
    logistics and tactical decisions.
  • Kang et al. (1998) described two simulation
    models for repair processes of aircraft in the
    navy, and suggested ways to reduce cycle time and
    improve readiness.

12
Literature Review
  • In 1998 in a study-conducted by RAND Arroyo
    Center, a new concept Velocity Management (VM)
    initiative entered to the military terminology.
  • Gue (2003) developed a multi-period facility
    location and material flow model and showed how
    to configure the land-based distribution system
    over time to support a given battle plan with
    minimum inventory.

13
Importance of Lead-Time in Military
  • In every supply chain, lead-time has different
    importance.
  • In military logistics, reduction of lead-time is
    very important especially in wartime period.
  • For that reason, every Army has different
    scenarios for both

14
Importance of Lead-Time in Military
  • Especially in battlefield, the aim of the
    logistics support units is to send the items to
    the right place at the right time, because this

15
The Model Used in Turkish Army
Turkish Army
AIR FOCES
NAVY
LAND FORCES
16
The Model Used in Turkish Army
  • For the basic logistics items, in peacetime, all
    of the forces use periodic review policy.
  • In wartime period, all of the forces use
    continuous review policy.

17
The Model Used in Turkish Army
  • Classification of the logistic materials
  • 1st class materials Foods,water, etc.
  • 2nd class materialsWeapon ,vehicle parts, etc.
  • 3rd class materials Fuel,gas, etc.
  • 4th class materials Special mission equipments
    (Night vision devices, NBC equipments, etc.)
  • 5th class materials All kinds of ammunitions.

18
The Model Used in Turkish Army (Current Model)
Current system being used in the Army
MAIN DEPOT (Army depot)
REGIONAL DISTRIBUTION CENTERS (Army corps depots)
19
The Model Used in Turkish Army
A typical distribution flow of current system
materials taken from outside
L0
L1
L3
L2
LTL0L1L2L3
LTSome time 1 or 2 years
20
The Model Used in Turkish Army
Current system
21
The Model Used in Turkish Army
The Logic of the proposed system
22
The Model Used in Turkish Army(New model)
Coordination Center
INFORMATION FLOWS
23
The Model Used in Turkish Army
The New System reduces Lead-time
L0
materials taken from outside
L3
LTL0L3
LT 5 or 6 months
24
The Model Used in Turkish Army
25
The Model Used in Turkish Army
26
The Model Used in Turkish Army
The differences between the current and the new
concept
27
The Model Used in Turkish Army
What is the difference between the current
proposed ?
Lead-Time current gt Lead-Time new
Operational Readiness current lt Operational
Readiness new
Response Time current gt Response Time new
28
The Model Used in Turkish Army
  • Advantages of the current model
    Disadvantages of the current model
  • Low cost (Transportation Holding)
    Complex flow of the materials
  • Planned activities
    Small ratio of op.
    readiness
  • Low technology requirement
    High of echelons

  • Long
    lead-times

  • Long
    response times

  • Failures in the
    replenishments
  • Advantages of proposed model
    Disadvantages of proposed model
  • Increase in the ratio of operational readiness
    High cost
  • Reduction in lead-times of the materials
    High technology requirement
  • Decrease in the response times
    Requires a very complex coordination
  • Right place -Right time replenishment

29
QA
Write a Comment
User Comments (0)
About PowerShow.com