A Presentation on Renewable Energy Financing - PowerPoint PPT Presentation

1 / 43
About This Presentation
Title:

A Presentation on Renewable Energy Financing

Description:

UNESCO. 1. e-learning course. e-learning course on. Bio-energy for achieving MDGs ... UNESCO. 6. e-learning course. Typical ... UNESCO. 13. e-learning course ... – PowerPoint PPT presentation

Number of Views:234
Avg rating:3.0/5.0
Slides: 44
Provided by: data98
Category:

less

Transcript and Presenter's Notes

Title: A Presentation on Renewable Energy Financing


1
e-learning course on Bio-energy for achieving
MDGs
Lecture 8 Financing Mechanisms for Renewable
Energy
Prof. Ram M. Shrestha School of Environment,
Resources and Development Asian Institute of
Technology Thailand E-mail ram_at_ait.ac.th 22
June 2007
2
Contents
  • Introduction
  • Conventional Methods of Financing
  • Typical Project Financing Models
  • Innovative financing Models for Renewable Energy
  • Clean Development Mechanism (CDM)
  • Dealer-Credit Model
  • - Grameen Shakti example
  • Consumer Credit Model
  • Supplier Credit Model
  • Energy Service Company Model
  • Revolving Fund
  • Global Environmental Facility (GEF)

3
Introduction
  • Given the huge potential opportunities in
    renewables, entrepreneurs and financial
    institutions are not rushing to cash on the
    opportunity.
  • One answer is that RETs have to overcome a series
    of barriers before they can penetrate the market.
  • Barriers may be of several kinds Initial cost,
    financial, technical, market, institutional,
    political, legal etc.
  • High initial cost of renewable energy
    technologies (RETs) and lack of financing have
    been among the key barriers to the widespread
    use of RETs.
  • Appropriate financing mechanism has a major role
    to play in the promotion of RETs.

4
Conventional Methods of Financing (1)
  • Methods of Financing
  • The two broad choices a firm has for financing an
    investment project are
  • Equity financing, and
  • Debt financing
  • Equity Financing
  • It can take one of two forms
  • - the use of retained earnings otherwise paid
    to stockholders,
  • - the issuance of stock.
  • Both forms of equity financing use funds invested
    by the current or new owners of the company.

5
Conventional Methods of Financing (2)
  • Debt Financing
  • It includes both short-term borrowing from
    financial institutions and the sale of long-term
    bonds, wherein money is borrowed from investors
    for a fixed period.
  • With debt financing, the interest paid on the
    loans or bonds is treated as an expense for
    income-tax purposes.

6
Typical Project Financing Models(1)
  • The most common structures used to finance
    projects are
  • Project Financing (also known as limited recourse
    financing),
  • Corporate Financing, and
  • Lease Financing.
  • Project Financing
  • The term project finance refers to financing
    structures wherein the lender has recourse only
    or primarily to the assets of the project and
    looks primarily to the cash flows of the project
    as the source of funds for repayment.
  • The terms limited recourse finance and
    non-recourse finance are used interchangeably
    with project finance.

7
Typical Project Financing Models(2)
  • Corporate Financing
  • It involves the use of internal company capital
    to finance a project directly, or the use of
    internal company assets as collateral to obtain a
    loan from a bank or other lender.
  • Lease Financing
  • Leasing essentially involves the supplier of an
    asset financing the use and possibly also the
    eventual purchase of the asset, on behalf of the
    project sponsor.
  • Assets which are typically leased include land,
    buildings, and specialized equipment.
  • A lease may be combined with a contract for
    operation and maintenance of the asset.

8
Innovative Financing Models
  • Clean Development Mechanism (CDM)
  • Dealer-Credit Model - Grameen Shakti
    example
  • Consumer Credit Model
  • Supplier Credit Model
  • Energy Service Company Model
  • Revolving Fund
  • Global Environment Facility (GEF)

9
Clean Development Mechanism (CDM)
  • Clean Development Mechanism (CDM) is one of the
    Kyoto mechanisms to achieve the objective of
    reducing GHG emissions.
  • CDM allows emission reduction projects that
    assist in creating sustainable development in
    developing countries to generate certified
    emission reductions (CER) for use by the
    investor.

10
CDM What does it do?
  • It enables Annex-1 countries (developed
    countries) to meet their emission reduction
    commitments in a flexible and cost-effective
    manner.
  • Assists developing countries (non-Annex I or
    also called the host countries) in meeting
    their sustainable development objectives.
  • Investors benefit from the CDM by obtaining
    Certificates of Emissions Reductions.
  • Host Countries benefit in the form of investment,
    access to better technology, and local
    sustainable development.
  • It is possible to have investments in a CDM
    project solely by host country parties. Such a
    project is called a unilateral CDM project.

11
What does CDM aim to achieve?
12
CDM Project Requirements
  • Estimate of Baseline greenhouse gas emissions.
  • Emissions additionality financial
    additionality.
  • Does the proposed project result in additional
    GHG emission reductions?
  • In other words, does its implementation result
    in less GHG emissions than that without it?
  • Is the project already one of the least expensive
    (financially attractive) options and therefore is
    planned to be implemented?
  • Is the project unlikely to be implemented
    although it is financially attractive (because of
    barriers like lack of access to financing
    resources or due to other barriers?
  • Host country government approval (The host
    country must have ratified the Kyoto Protocol.)
  • Meeting the sustainable development criteria

13
Special Characteristics of a CDM project in
relation to Financial Analysis
  • Two distinct sources of CDM project revenue
  • from sale of normal product (e.g., electricity,
    Price and
  • qty. of electricity?)
  • from sale of CERs (Price and qty. of CER?)
  • Distinct costs of CDM projects (besides the
    standard project costs)
  • (i) Transaction costs (including costs of PDD
    preparation,
  • monitoring, verification, validation,
    trading of CERs).
  • (ii) Costs related to project approval and
    registration .
  • Some times both (i) and (ii) could be lumped and
    called as transaction costs.

14
Dealer-Credit Model (or Dealer Sales Model)
  • Here the dealer is provided support through
    access to business financing and sells the RE
    system to the end user, which can be some times
    on credit. The model can be shown as
  • In the case of Bangladesh, International Finance
    Corporation, the private sector arm of the World
    Bank, provided loan to the dealer, Grameen
    Shakti, under their Small and Medium Scale
    Enterprise Program. The Grameen Shakti, in turn,
    extended credit to customers to purchase RE
    system.
  • Dealer credit was tried but rejected by the
    dealers in Sri Lanka in favour of consumer credit
    through Sarvodaya, a micro finance organization,
    which in turn borrows from commercial financers.

Figure 1 Dealer-credit model
15
The Consumer Credit Model
  • In this mechanism, local finance institutions
    provide loans to users to buy the RE system. The
    RE enterprise in this case transacts on
    commercial basis with the users.
  • Figure 2 Consumer Credit Model
  • Example Micro-Credit through Sarvodaya in Sri
    Lanka

16
The Supplier Credit Model
  • In which a RE enterprise provides a short term
    (3-12 month) credit to the end user to purchase
    the RE equipment/system.

Figure 3 The Supplier Credit Model
17
Energy Service Company Model (Fee-for-Service
Model)
  • The Energy Service Company Model (or
    Fee-for-Service model), in which the customers
    pay for the energy service that is provided to
    them by an energy service company (ESCO).
  • It makes the energy affordable and minimizes the
    long-term risks for the customers as the
    ownership and maintenance of the equipment lies
    with the energy service company.
  • The World bank used this model in Argentina,
    Benin, Togo, Dominican Republic and Cape Verde.

Figure 4 Fee-for-Service Model
18
Energy Service Company Model (Contd.)
  • The energy service company model was also tried
    out in Sri Lanka but given up after initial
    problems in favor of the consumer credit model.
    In the World Bank energy service company delivery
    models, financing for energy service companies
    was provided through either government or
    multilateral sources, but channeled through
    commercial financiers in many cases.
  • The lease model is similar to the fee-for-service
    model as the ownership of the equipment lies with
    the leasing company, which typically are
    specialized financial institutions. It has been
    used for big, mostly on-grid power, generation
    equipment.

19
Grameen Shakti (Bangladesh) An Example of
Dealer Credit Model (1)
  • Grameen Shakti (GS) builds on the experience and
    success of its sister organization, the Grameen
    Bank.
  • RE and solar home systems in particular are the
    most practical and cost-effective solution for
    rural electrification in Bangladesh. But such
    technologies are not affordable as such for the
    average rural Bangladeshi.
  • Grameen Bank in Bangladesh set up a
    not-for-profit subsidiary, Grameen Shakti, which
    is involved in the marketing, sales, servicing,
    credit provision and other activities related to
    photovoltaic solar home systems business.
  • GS developed an innovative micro-credit scheme to
    make technologies affordable to the majority with
    a concept to provide clean energy.

20
Grameen Shakti, Bangladesh (2)
  • Description of the GS model
  • GS developed five financing models for the
    diffusion of solar home systems (SHS). They vary
    in terms of down payment requirements (10 to
    25), number of monthly installments (24 to 42)
    and service charge (8 to 12).
  • Five Financing Models of GS
  • Model 1 The customer has to pay 15 of the
    total price as a down payment during installation
    and the remaining 85 of the cost is paid by
    monthly installment within 36 months, including a
    12 service charge.
  • Model 2 The customer has to pay 25 of the
    total price as a down payment during installation
    and the remaining 75 of the cost is paid by
    monthly installment within 24 months, with 8
    service charge.
  • Model 3 The customer has to pay 15 of the
    total price as a down payment during installation
    and the remaining 85 of the cost, including 10
    service charge, is made by 36 post-dated cheques.

21
Grameen Shakti, Bangladesh, (3)
  • Model 4 4 discount is given for cash purchase.
  • Model 5 (Micro utility) The customer has to pay
    10 of the total price as a down payment during
    the installation and the remaining cost is paid
    by monthly installment within 42 months, without
    any service charge. Here the customer sets it up
    on his/her premises, and other shop owners get
    electricity from the solar system against a small
    fee.

22
Revolving Fund (1)
  • A revolving fund is a reserve money or fund,
    often used in developing countries, used for
    lending to one or more borrowers. The idea for
    the revolving fund can be used both for an
    organization or an individual.
  • The borrower on the other hand is expected to
    repay the original sum that restocks the fund
    over the given period of time.
  • Usually, an additional sum is charged (interest)
    to the borrower that acts as a fee for providing
    the service (administrative costs) and helps to
    protect the fund from being depleted. These
    include inflation, non-payments and the cost to
    the lender of getting outside finance.

23
Revolving Fund (2)
  • The basic principles for establishment of the
    revolving funds include
  • - Maximizing incentives for high repayment
    rates
  • - Selecting projects with high energy saving
    potential and low pay-
  • back period (up to five years)
  • - Allocating funds on the cost-sharing basis
  • -Transparency and control over financial
    disbursements by UNDP
  • (during the project implementation
    period), other donors, the
  • National Executing Agency and regional
    administrations
  • - Creating incentives for participatory
    energy-efficiency projects with
  • private sector involvement.

24
Revolving Fund (3)Case of Small Hydro Schemes
in Peru
  • A revolving fund for financing micro hydro power
    plants was set up in 1994 through an agreement
    between the Inter-American Development Bank and
    ITDG-Peru, a NGO.
  • This Fund consists of a financial model based on
    loans subsidized through technical assistance and
    interest payments from individual clients (micro
    rural entrepreneurs). It is a loan fund applied
    for one energy technology, the micro-hydro
    power, covering the installation of new systems,
    rehabilitation and/or repair of existing systems.
  • The amount of loans ranges from US 10,000 to US
    50,000, with an interest rate of 10. The payback
    period is 1 to 5 years, and the grace period
    varies, depending on the clients financial
    situation.

25
Revolving Fund (4) Case of Small Hydro Schemes
in Peru (Contd.)
  • Within the framework of this fund, four
    activities are developed in each project
  • - Promotion and its benefits,
  • - Technical and financial assistance,
  • - Organization for sustainable management, and
  • - Recovery of loans.
  • The project was initiated with the view to
    provide electricity to remote areas not reachable
    through conventional grid.
  • The fund has provided loan finance to 15 rural
    electrification projects of municipalities, 5
    projects of the private sector and one project of
    the cooperative.

26
GEF and Renewable Energy (1)
  • Established in 1991, Global Environmental
    Facility (GEF) is an independent financial
    organization that provides grants to developing
    countries for projects that benefit the global
    environment and promote sustainable livelihoods
    in local communities.
  • GEF and Renewable Energy
  • The GEF helps countries remove barriers to
    developing markets for renewable energies
    wherever cost-effective.
  • GEF support helps create enabling policy
    frameworks, build the capacity for understanding
    and using the technologies, and establish
    financial mechanisms to make renewables more
    affordable.

27
GEF and Renewable Energy (2)
  • GEF deals with problems hampering the
    transformation of markets for renewable energy
  • - lack of supportive policy frameworks,
  • - inadequate financing for installations or
    supporting businesses,
  • - lack of technical capacity, and
  • - lack of awareness and trust in the
    technologies by users and utility
  • companies.
  • The GEFs renewable energy projects involve
  • - private firms as manufacturers and dealers,
  • - local project developers,
  • - financial intermediaries,
  • - recipients of technical assistance,
  • - technology suppliers and contractors, and
  • - project executors.

28
GEF and Renewable Energy(3)
  • Some typical examples are
  • Solar home systems for rural off-grid markets
  • Mini-grids based on micro-hydro, photovoltaic,
    wind, or biomass
  • Biomass and biogas for captive applications
    (agro-processing industry)
  • Wind farm demonstrations
  • Favorable policy environments for wind farms
    (such as power purchase agreements)
  • Geothermal power plants
  • Biomass-based district heating
  • Innovative financing mechanism for renewable
    energies.

29
GEF and Renewable Energy (4)
  • GEFs three Implementing Agencies,
  • United Nations Development Programme (UNDP),
  • the United Nations Environment Programme (UNEP),
    and
  • the World Bank and seven Executing Agencies
    (under the policy of expanded opportunities).
  • These agencies work with the operational focal
    point in each recipient country to develop
    project ideas that are consistent both with the
    countrys national programs and priorities and
    with GEFs operational strategy and programs.

30
References
  • Painuly, J. P., Wohlgemuth, N., 2006, Renewable
    Energy Financing What can we learn from
    experience in developing countries?, Energy
    Studies Review, Vol. 14, No. 2, pp 154 170.
  • Park, Chan S., Contemporary Engineering
    Economics, 4th edition, Prentice-Hall, N.J.,
    2007.
  • EcoSecurities,2007,Guidebook to Financing CDM
    Projects, UNEP Risoe Centre, Denmark.

31
AppendixSome Case Studies
32
The World Bank/GEF India Alternate Energy Project
(1)
Figure 5 Steps Followed by India Renewable RDP
33
The World Bank/GEF India Alternate Energy
Project(Contd.) (2)
  • Also known as India Renewable Resources
    Development Project, with co-financing from three
    other agencies, provided low-interest loans to
    wind farm developers in the nineties.
  • At the same time, favorable investment tax
    policies and a supportive regulatory framework
    resulted in unprecedented market growth for wind
    power.
  • More than 1200 MW of wind capacity had been
    installed by the private sector by 2000. Of this,
    direct financing by the GEF project was only 41
    MW.
  • Several local financial institutions also started
    financing wind farms which continued thereafter
    also as capabilities had been developed and a
    supportive regulatory framework had been
    established.

34
Rural Energy Development Programme (REDP), Nepal
(1)
  • Main Concept
  • The Rural Energy Development Programme (REDP)
    started in 1996 under an initiative of UNDP in
    Nepal.
  • The main idea of the programme is to promote
    clean energy as a way to enhance socio-economic
    development, alleviate poverty and protect the
    environment in rural Nepal.
  • REDP engages the community as a whole in energy
    projects in order to lower the cost and to ensure
    that every community member benefits from the
    project.
  • REDP main innovation is the mobilization of
    entire communities, both males and females.

35
REDP, Nepal (2)
  • Success Factor
  • The first success factor is the institutional
    support provided by AEPC and the availability of
    soft loans for RE projects with ADBN.
  • The second success factor is the innovative
    community mobilization mechanism, whereby the
    community as a whole decides on which technology
    to implement and how to finance the related cost.
  • Thirdly, the involvement of the local authorities
    District Development Committee and Village
    Development Committee (DDC and VDC) as
    shareholders further reduce the cost of the
    project for the community, while providing a
    source of income on the long term for the local
    authorities.
  • Fourthly, to stimulate demand for electricity and
    ensure high load factor on the RE system, REDP
    encourages the development of income generating
    activities through trainings, grants and soft
    loans.
  • Finally, the success of REDP owes a lot to the
    availability of good quality locally manufactured
    RE technologies.

36
Sunlabob Rental System, Laos (1)
  • Main Concept
  • Currently, less than fifty percent of the
    population has access to electricity in Laos. The
    government has an ambitious plan to reach 90 of
    the population by 2020.
  • Sunlabob, a private energy company was created in
    2000 in Vientiane Laos.
  • The main idea of the company is to install good
    quality RE systems and to ensure high quality
    after-sale services.
  • For remote villages, it developed a rental scheme
    for solar home systems.

37
Sunlabob Rental System, Laos (Contd.) (2)
  • Success Factor
  • The main success factor is the flexibility
    brought by the rental system.
  • Secondly, the fact that energy users do not have
    to pay for the system removes the financial
    barriers.
  • Thirdly, the commercial operation insures that
    the installed systems are of good quality and
    that the number of installed systems keep
    expanding.
  • Fourthly, the availability of local know-how in
    RE can attract other non-commercial projects (in
    the social sector for example).
  • Finally and more importantly, the rental system
    is self-financed, and therefore is not subject to
    donor funding. Sunlabob is a Lao company,
    registered in Vientiane and will not leave the
    country.

38
Multifunctional Platform in Mail (Contd.) (1)
  • Main Concept
  • Multifunctional platforms are small diesel
    engines providing mechanical energy to various
    devices providing useful services for the society
    and the women in particular.
  • The devices can be water pump, grinding mill, oil
    expeller, battery charger, etc. according to the
    needs identified by a particular womens group.
  • These platforms have proved to bring substantial
    benefits to women in West Africa by saving them
    time while performing household activities
    (fetching water, milling rice, etc.) and
    providing them with opportunities to engage in
    new and more profitable income generating
    activities.

39
Multifunctional Platform in Mail (Contd.) (2)
  • Success Factors
  • The main factor behind the success is the fact
    that a donor could implement these platforms with
    an important subsidy making them affordable for
    womens groups in poor villages. Without this
    subsidy, the platform would not have been
    affordable for the womens groups.
  • Another key factor is that the platforms are
    bought by a group of women and not an individual
    woman. The fact the group as a whole raises the
    money allows poor and marginalized women
    (providing they are accepted in the group) to
    participate and benefit from the platform even if
    their financial contribution is limited

40
Sri Lanka Energy Services Delivery Project (1)
  • Implemented between 1997 and 2002, the Sri Lanka
    Energy Services Delivery Project provided
    commercial financing through banks and micro
    finance institutions for private sector provision
    of on-and off-grid renewable energy services.
  • This included mini hydro plants (grid
    connected), community hydro schemes (off-grid)
    and solar home systems.

Figure 6 Sri Lanka Energy Services Delivery
Project
41
E7 Project in Indonesia (1)
  • Main Concept
  • In Indonesia, many implemented projects suffered
    from rapid technical failures and lack of
    financial sustainability.
  • In the late nineties, E7 a group of nine leading
    electricity companies from seven G7 countries,
    started a innovative RE project based on a
    bottom-up approach.
  • The financing model used was a partnership
    between the project implementers and the
    electricity users, whereby the project
    implementers borne the investment cost and the
    users paid for operation and maintenance.
  • The project was managed at three level, the
    national level, regional level and village level.
    The project promoted the establishment of
    village-based electricity management units
    (Pengelola Listrik Desa or PLD).

42
E7 Project in Indonesia (Contd.) (2)
  • Success Factors
  • The main success factor is that the investment is
    borne by the project implementers and not by
    individual users, thereby making RE affordable
    for a large number of people.
  • The fact that the project followed a bottom up
    approach was seen as a major success as compared
    to the previous RE projects in Indonesia which
    followed a more top-down approach.
  • Finally, the fact that SHS users become owner of
    their system was seen as a major incentive to
    ensure proper care and use of the systems.

43
Photovoltaic Solar Home System Financing in India
(1)
  • A credit facility, initiated in 2003 by UNEP in
    Southern India to help rural households finance
    the purchase of solar home systems.
  • The programme provides financial support in the
    form of interest rate subsidies for borrowers.
  • The programme also provides assistance with
    technical issues, vendor qualification and other
    activities to develop the institutional capacity
    for this type of finance.
  • As of January 2005, the programme had financed
    nearly 12,000 loans, through more than 2000
    participating bank branches. Sales volume had
    reached 1000 systems per month.
  • The fastest growth in loans is currently in rural
    areas as because of the increasing participation
    of the Grameen banks.
  • The 3-year programme with US 1 million in
    support to banks is on target to finance between
    20,000 and 25,000 solar home systems, making it
    one of the largest solar home systems loan
    programmes globally.
Write a Comment
User Comments (0)
About PowerShow.com