Step for resetting and long beep:

1
Resetting and long beep test for PCB without
digital display

• Step for resetting and long beep
• Connect the PCB with machine.
• Switch on the machine from power supply board.
• Do not switch on the power button of PCB.
• Ensure there should not be water and cloth load
  in machine.
• Press program (SW3) and process (SW4) button
  simultaneously and wait.
• 3 program LED will simultaneously blink along
  with 6 small beep sound.
• At the end one long beep sound will come and
  machine gets off.
• Press the power button and then press start
  button and keep it pressed. After 6 rotation of
  pulsator fuzzy light should glow.

Applicable Models Digi Pacific, Digi
Atlantic, Digi Rainbow,
Digi Wave, Digi Aqua,
KF-6011, KF-6511
Process and program button to be pressed
simultaneously
2
Resetting and long beep test for DIGI SPRING PCB
with digital display

• Step for resetting and long beep
• Connect the PCB with machine.
• Switch on the machine from power supply board.
• Ensure that there should not be water or clothe
  load in machine. It should be empty.
• Press power and water level (WL) button
  simultaneously and wait.
• Machine will be silent for 6 sec and display will
  show dr.
• At the end long beep sound will come and machine
  gets off.
• Press the power button and then press start
  button and keep it pressed. After 6 rotation of
  pulsator fuzzy light should glow.

Applicable Models Digi Spring
Power and water level button to be press
simultaneously