Chapter 2A: Antacids

1
Chapter 2A Antacids
2
Why do we need antacids?

• Your body needs hydrochloric acid to digest food
• Too much causes heartburn, ulcers and can damage
  your esophagus

3
Antacids versus Acid Inhibitors
There are two types of medicines you can use
Acid Inhibitors
Antacids
Neutralizes the acid currently in your system
Controls the amount of acid your body produces
Work quickly but your body will make more acid
again
Long-term solution, but needs to build up in your
system to be most effective
Alka-Seltzer , Rolaids , Tums , Malox ,
Mylanta
Tagamat , Zantac , Pepcid AC
Is it fair when a commercial compares the fast
action of an antacid to an acid inhibitor that
takes up to 7 days to build up?
4
Antacids

• This chapter will introduce the chemistry needed
  to understand how antacids work
• Section 2.1 Types of Matter
• Section 2.2a Identifying Ions
• Section 2.2b Naming Ionic Compounds
• Section 2.2c Naming Covalent Compounds
• Section 2.3 Writing Formulas for Ionic
• Covalent compounds

5
Section 2.1Types of Matter
6
(No Transcript)
7
Matter is.

• Anything that has mass and takes up space
  (volume)
• Anything made from atoms
• Examples elements, molecules, cells, people,
  air, water, paper
• Non Examples dreams, energy (light, heat),
  emotions

8
Pure Substances versus Mixtures
Matter is classified as either a pure substance
or a mixture
Mixtures
Pure Substances
Contain only 1 type of particle Elements or
Compounds
Contain 2 or more pure substances Homogeneous or
Heterogeneous
9
Pure Substances
Compound
Elements
2 or more elements chemically bonded together to
form molecules. Each is the same fixed ratio of
elements. H2O, NaCl, CO2
Simplest kind of matter Made of only 1 kind of
atom Cu, Ag, Fe, Br2
10
Elements
Single Atom
Cannot be separated by chemical or physical
processes
Element
Pure substance Every atom is the same Elements
can be found on the periodic table!
11
Elements
http//www.youtube.com/watch?v7FesjAdIWBk
12
Compounds
Single Molecule



Made of more than one type of atom bonded together
Compound
Pure substance Every molecule is the same
Can only be separated by chemical reactions
13
(No Transcript)
14
Mixtures
More than 1 different type of matter

• Can be separated physically by
• Distillation
• Filtration
• Chromatography

Mixture
Not a pure substance Physical combination of more
than 1 type of pure substance
15
Mixtures
Mixtures can be classified as homogeneous or
heterogeneous
Heterogeneous
Homogeneous (aka solution)
It looks the same throughout substances evenly
dispersed Ex. salt water, alloys, clean air
Different substances can be seen (chunks,
bubbles, floaties, layers) Ex. salad dressing,
fog, chocolate chip cookies, soil
16
Mixture possibilities

• Mixtures can be any combination of solids,
  liquids and gases
• Solid-solid Medicine tablet
• Solid-gas Pop Rocks candy
• Solid-liquid Ice water
• Liquid-liquid lemon water
• Gas-Liquid Carbonated water
• Gas-Gas Air

17
Homogeneous Mixtures
Kool-Aid sugar in water
Brass copper in zinc
Air oxygen gas in nitrogen gas
Milk fat, proteins, sugar in water
18
Heterogeneous Mixtures
Oil in water
Italian Salad Dressing
Fruit Salad
Chicken Noodle Soup
19
Classification of Matter
20
True Solutions, Colloids Suspensions
Homogeneous Heterogeneous
Heterogeneous
Colloid
True Solution
Suspension
SMALL particles dont settle out and are too
small to scatter light Ex salt water, air, brass
INTERMEDIATE particles dont settle out but are
large enough to scatter light Ex fog, foam,
jello, paint
LARGE particles that settle out over time Ex
oral medicines, italian dressing, paint
Dissolved Particle Size Increases
21
True Solutions
22
Suspensions
vinegar and oil salad dressing
23
Particles Scattering Light

• If the dissolved particles
• are large enough to scatter
• light, we say it exhibits the
• Tyndall Effect

Solution Light passes through unchanged
Colloids exhibit the Tyndall Effect Light is
scattered by larger solute particles
24
Connect these concepts with Antacids

• What type of matter do you think antacids are?
• Pure substance (Element or compound)
• Mixture (homogeneous or heterogeneous)

25
Connect these concepts with Antacids

• Antacids are mixtures.
• They contain active inactive ingredients
• What purposes could the inactive ingredients
  serve?

26
Connect these concepts with Antacids

• Inactive ingredients might
• Add volume to make the pill able to be handled
• Add color and flavor
• Allow the tablet to be compressed and formed

27
Lets Practice Not in Notes
Example Determine if each is element, compound,
homogeneous or heterogeneous mixtures
Tin can (Sn)
Copper pipe (Cu)
Concrete
Carbon tetrachloride(CCl4)
Sports drink
28
Lets Practice
Example Determine if each is element, compound,
homogeneous or heterogeneous mixtures
Element
Tin
Copper pipe
Element
Heterogeneous mix
Concrete
Compound
Carbon tetrachloride
Homogenous mix
Sports drink
29
You Try! In Notes
Example Determine if each is element, compound,
homogeneous or heterogeneous mixtures
Aluminum foil (Al)
Water (H2O)
soda
soil
Carbon dioxide(CO2)
Tap water
30
You Try!
Example Determine if each is element, compound,
homogeneous or heterogeneous mixtures
Element
Aluminum foil (Al)
Compound
Water (H2O)
Homogeneous mix
Flat soda
Heterogeneous mix
soil
Carbon dioxide(CO2)
compound
Tap water
Homogeneous mix
31
The Science of Macaroni Salad

• http//www.freetech4teachers.com/2013/08/the-scien
  ce-of-macaroni-salad.html.UkySCODvSDo

32
Section 2.2aNaming Chemicals
We need to be able to name the chemicals in the
antacids!
33
Section 2.2aIdentifying Ions
We need to be able to name the chemicals in the
antacids!
34
The Language of Chemistry
Chemistry has a language all of its own
English
Chemistry
Element Symbols
Letters
Chemical Formulas
Words
Chemical Equations
Sentences
Each element symbol starts with a capital letter
35
ELEMENTS made of atoms

• An atom consists of subatomic particles
• There are 3 subatomic particles protons,
  electrons and neutrons
• Neutral atoms have the same number of protons and
  eletrons

36
IONS

• An atom or group of atoms with a charge.
• The number of protons does not equal the number
  of electrons.
• WHY? Atoms can gain or lose electrons to acquire
  stability like a noble gas element.

37
The Periodic Table of Elements
Metals form cations NonMetals form
anions
H He
Li Be B C N O F Ne
Na Mg Al Si P S Cl Ar
K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr
Rb Sr Y Zr Nb Mo Tc Ru Rh Pd Ag Cd In Sn Sb Te I Xe
Cs Ba Lu Hf Ta W Re Os Ir Pt Au Hg Tl Pb Bi Po At Rn
Fr Ra Lr Rf Db Sg Bh Hs Mt Uun Uuu Uub Uut

Metals Metals Metalloids Metalloids Non-metals Non-metals
38
Monatomic Ions (formed from a single atom)
  Cations Positive charge Metal atoms that
lose electrons   Group A (Representative
metals/Type I ) The group for metals in
columns 1A, 2A, 3A is equal to the charge of
the cation Naming them Take the element name
and add the word ion
39
Monatomic Ions of Group A /Type I Metals
Group A
Group A
Group B
40
Group B (Transition/Type II Metals) have more
than one charge
You should be familiar with the following
transition metals with more than one charge. Fe2
Fe3 Sn2 Sn4 Pb2 Pb4 Co2
Co3 Cr2 Cr3 Mn2 Mn3 Cu1
Cu2
Naming them Take the element name and place in
parentheses the charge number as a roman numeral
and add the word ion
41
Monatomic Ions of Transition/Type II Metals

42
Monatomic Ions (formed from a single atom) Cu2,
F-1   Anions Negative charge Nonmetals
that gain electrons   Group A (Representative
nonmetals) Subtract the group in columns 4A,
5A, 6A, and 7A from 8 to get the charge. Naming
them Drop the ending of the element and add ide
and then ion
43
You Try!

• Try These Write the formula for each ion and
  name it.
•  Calcium
• Chromium
• Chlorine
• Sulfur

44
You Try!

• Try These Write the formula for each ion and
  name it.
•  Calcium Ca2 calcium ion
• Chromium Cr2 chromium(II) ion
• Cr3 chromium (III) ion
• Chlorine Cl-1 chloride ion
• Sulfur S-2 sulfide ion

45
Self Check

• Try These Write the formula for each ion and
  name it.
•  Aluminum
• Zinc
• Iron
• Phosphorus

Al3 Aluminum Ion Zn2 Zinc ion Fe2 Iron (II)
ion or Fe3 Iron (III) ion P-3 Phosphide ion
46
Section 2.2bNaming Ionic Compounds
We need to be able to name the chemicals in the
antacids!
47
Binary Ionic Compounds
Binary Ionic Compound- compound containing 2
elementsone metal and one non-metal
The atoms are held together by Ionic Bonds- bond
formed by attraction between ions and ions
Metal Nonmetal
Cation
- Anion
48
Metals Non-Metals
Ionic Bonds are between metals non-metals
H He
Li Be B C N O F Ne
Na Mg Al Si P S Cl Ar
K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr
Rb Sr Y Zr Nb Mo Tc Ru Rh Pd Ag Cd In Sn Sb Te I Xe
Cs Ba Lu Hf Ta W Re Os Ir Pt Au Hg Tl Pb Bi Po At Rn
Fr Ra Lr Rf Db Sg Bh Hs Mt Uun Uuu Uub Uut

Metals Metals Metalloids Metalloids Non-metals Non-metals
49
How to Identify Name a Binary Ionic Compound

• Look for
• 2 elements (binary)
• A type I metal a non-metal (ionic)
• To name these compounds
• Write the name of the type 1 metal (the cation)
• Write the name of the non-metal (the anion) with
  the suffix -ide

The subscripts in the formula do not matter when
naming this type
50
Example 1
NaCl
51
Sodium
Cation
NaCl
Anion
Chlorine becomes Chloride
Sodium Chloride
52
Example 2
CaBr2
53
Calcium
Cation
CaBr2
Anion
Bromine becomes Bromide
Calcium Bromide
54
Example 3
K2O
55
Potassium
Cation
K2O
Anion
Oxygen becomes Oxide
Potassium Oxide
56
Self Check
Li2O Sr3P2 MgS BaI2
Example Write the name for the following
compounds
57
Answers
Lithium oxide Strontium phosphide Magnesium
sulfide Barium iodide
Li2O Sr3P2 MgS BaI2
Example Write the name for the following
compounds
58
Ternary Ionic Compounds
Ternary Ionic Compound- a compound containing at
least one polyatomic ion
Polyatomic Ion- an ion that has more than one
atom that together have a single charge
Cation
- Anion
Polyatomic Cation
59
Common Polyatomic Ions
You dont need to memorize them. Look at your
reference sheet.
COMMON POLYATOMIC IONS COMMON POLYATOMIC IONS
Acetate, CH3COO-1 or C2H3O2-1 Ammonium NH41 Bromate, BrO3-1 Bromite, BrO2-1 Carbonate, CO3-2 Carbonite, CO2-2 Chlorate, ClO3-1 Chlorite, ClO2-1 Chromate, CrO4-2 Cyanide, CN-1 Dichromate, Cr2O7-2 Dihydrogen phosphate, H2PO4-1 Hydrogen carbonate or bicarbonate, HCO3-1 Hydrogen phosphate or biphosphate, HPO4-2 Hydrogen sulfate or bisulfate, HSO4-1 Hydroxide, OH-1 Hypochlorite, ClO-1 Iodate, IO3-1 Iodite, IO2-1 Nitrate, NO3-1 Nitrite, NO2-1 Oxalate, C2O4-2 Perchlorate, ClO4-1 Permanganate, MnO4-1 Peroxide, O2-2 Phosphate, PO4-3 Phosphite, PO3-3 Silicate, SiO3-1 Sulfate, SO4-2 Sulfite, SO3-2
60
Identifying Polyatomic Ions Hints

• The only cation (front-half) polyatomic ion is
  NH4
• All other polyatomic ions are anions (back-half)
• The subscripts within the polyatomic ion are
  important (it must match exactly with the one on
  your ion list)
• If there are parentheses, the polyatomic ion is
  inside (ignore the number outside)

61
Practice Identifying Polyatomic Ions
NaNO3 NH4Cl Ca(OH)2 (NH4)3PO4 K2CO3
Example Underline name the polyatomic ion in
each compound
62
Practice Identifying Polyatomic Ions
NaNO3 NH4Cl Ca(OH)2 (NH4)3PO4 K2CO3
Nitrate Ammonium Hydroxide Ammonium
phosphate Carbonate
Example Identify and name the polyatomic ion in
each compound
63
How to Identify Name Ternary Ionic Compounds

• Look for
• More than 2 capital letters next to one another
  (not starting with H)
• Contain at least 1 metal 1 non-metal
• To name these compounds
• Write the name of the cation (either the metal
  element name or Ammonium for NH4)
• If the anion is a polyatomic ion, write the given
  polyatomic ions name
• If the anion is a single non-metal element, write
  its name with the suffix -ide

64
Example 4
Ca(NO3)2
65
Calcium
Cation
Ca(NO3)2
Polyatomic Anion
Nitrate
Calcium Nitrate
66
Example 5
Na3PO4
67
Sodium
Cation
Na3PO4
Polyatomic Anion
phosphate
Sodium phosphate
68
Example 6
K2CO3
69
potassium
Cation
K2CO3
Polyatomic Anion
carbonate
Potassium carbonate
70
Self Check
Ca(C2H3O2)2 Li2SO3 Ba(OH)2 (NH4)2S
Example Write the name for the following
compounds
71
Answers
Calcium acetate Lithium sulfite Barium
hydroxide Ammonium Sulfide
Ca(C2H3O2)2 Li2SO3 Ba(OH)2 (NH4)2S
Example Write the name for the following
compounds
72
Worksheet 1 (1-10 Answers)
6. Silver chloride

• 1. Sodium sulfide

2. Aluminum oxide
7. Boron nitride
8. Barium fluoride

• 3. Sodium chloride

4. Rubidium iodide
9. Strontium nitride
5. Zinc bromide
10. Magnesium chloride
73
Worksheet 2 (1-10 Answers)
6.chromium (VI) oxide

• 1. copper(I) fluoride

2. copper (II) fluoride
7. gold(I) bromide
8. nickel(II) oxide

• 3. chromium (III) oxide

9. vanadium(III) iodide
4. lead (II) iodide
10. tin(IV) oxide
5. lead (IV) chloride
74
Worksheet 3 (1-10 Answers)
Gold(I) nitrate

• 1. vanadium(V) chlorate

7. iron(III) phosphite
2. rhenium(VI) sulfate
8. nickel(II) bromate
9. lead(IV) sulfide

• 3. osmium(III) iodate

10. Manganese (VII) dichromate
4. iridium(IV) phosphate
5. palladium(IV) sulfite
75
Worksheet 4 (1-10 Answers)
6. ammonium nitrate

• 1. ammonium chloride

2. hydrogen chlorite
7. strontium phosphate
8. zinc chlorate

• 3. calcium bromate

4. beryllium sulfate
9. silver iodate
10. potassium dichromate
5. ammonium nitride
76
Transition Metals Revisisted
Transition Metal- group B or Type II metal that
has the possibility of having more than one
cation charge
Common multivalent metals and their
charges Cobalt Co2 Co3 Copper
Cu1 Cu2 Iron Fe2
Fe3 Manganese Mn2 Mn3 Mercury
Hg22 Hg2

• IMPORTANT
• Although group B metals, SILVER (1), CADMIUM
  (2), and ZINC (2) only have 1 charge
• Although the elements of TIN and LEAD are group A
  elements, they do have more than one charge
• Sn(2 and 4) and Pb(2 and 4)

77
How to Identify Name Ionic Compounds with
Transition Metals

• Look for
• One of the transition metals, excluding Ag, Cd,
  and Zn
• To name these compounds
• Write the name of the Type II metal element
  (cation)
• Write the name of the anion (element name with
  -ide or polyatomic ion name)
• Determine the charge of the transition metal
• 1. Total negative charge total positive charge
  for all neutral compounds
• 2. Divide total positive charge by the number of
  metal atoms
• 3. Write the charge in roman numerals in
  parentheses after the Type II metals name

78
Example 7
CuCl
79
Copper
Cation
CuCl
Copper Chloride
Anion
Chlorine becomes Chloride
80
Copper
Cation
Chloride has a 1 charge
CuCl
-1 charge 1 ion -1
A 1 charge needs a 1 charge
Anion
Chlorine becomes Chloride
Therefore, copper must be 1, (I)
(I)
Copper Chloride
81
Example 8
Fe2(CO3)3
82
Iron
Cation
Fe2(CO3)3
Iron carbonate
Polyatomic Anion
Carbonate
83
Iron
Cation
Carbonate has a 2 charge
Fe2(CO3)3
-2 charge 3 ions -6
A 6 charge needs a 6 charge and there are 2
iron ions
Polyatomic Anion
Carbonate
Therefore, iron must be 3 (III)
(III)
Iron carbonate
84
Example 9
ZnBr2
85
Zinc
Cation
ZnBr2
Zinc bromide
monatomic Anion
bromide
86
Zinc
Cation
bromide has a 1 charge
ZnBr2
-1 charge 2 ions -2
A 2 charge needs a 2 charge and there is 1 zinc
ion
Polyatomic Anion
bromide
Therefore, zinc must be 2 (not needed) it only
has one charge
Zinc bromide
87
Self Check
PbCl2 PbCl4 MnO Mn2O3
Example Write the name for the following
compounds
88
Answers
Lead (II) chloride Lead (IV) chloride Manganese
(II) oxide Manganese (III) oxide
PbCl2 PbCl4 MnO Mn2O3
Example Write the name for the following
compounds
89
Section 2.2bNaming Covalent Compounds
We need to be able to name the chemicals in the
antacids!
90
Binary Covalent (Molecular) Compounds
Binary Molecular Compounds are made from two
non-metals that are covalently bonded Covalent
bond a bond formed from atoms that share
electrons
Non metal
Non metal
91
Identifying Naming Binary Molecular

• These compounds have
• 2 elements (binary)
• Both non-metals (covalent)
• To name these compounds
• Write the name of the first element with the
  prefix indicating the number of atoms (except
  dont use mono- if only 1 atom)
• Write the name of the second element with the
  prefix indicating the number of atoms (including
  mono-) and the suffix ide

92
Covalent Prefixes
PREFIXES USED IN MOLECULAR COMPOUNDS mono di- tri- tetra- penta- hexa- hepta- octa- nona- deca-
93
Example 10
P2O5
94
2 di-
Phosphorus
P2O5
Oxygen
5 penta- oxide
Diphosphorus pentaoxide
95
Example 11
SiF4
96
Dont use mono- on first element
Silicon
SiF4
Fluorine
4 tetra- fluoride
Silicon tetrafluoride
97
Self Check
SO2 N2Cl4 P4O10 CO
Example Write the name for the following
compounds
98
Answers
SO2 N2Cl4 P4O10 CO
sulfur dioxide Dinitrogen tetrachloride Tetraphosp
horus decaoxide Carbon monoxide
Example Write the name for the following
compounds
99
(No Transcript)
100
Mixed Practice Determine the type of compound,
Ionic (m/nm) or Covalent (nm/nm) then follow
rules
Na2O K3PO4 Cu(OH)2 N2S MgCl2
Example Write the name for the following
compounds
101
Answers
Sodium oxide Potassium phosphate Copper (II)
hydroxide Dinitrogen monosulfide Magnesium
chloride
Na2O K3PO4 Cu(OH)2 N2S MgCl2
Example Write the name for the following
compounds
102
Section 2.3Writing Chemical Formulas For Ionic
Covalent Compounds
We need to be able to read the formulas for
chemicals in the antacids!
103
Reminders from Section 2.2

• Your Reference sheet has a list of
• Common polyatomic ions
• Use your periodic table is used to determine the
  charges of common elements when they form ions
• You must memorize the 10 prefixes for covalent
  compounds

104
Binary Ionic Compounds

• containing two elementsone metal and one
  non-metal
• formed by attraction between and - ions

Cation
- Anion
105
How to Write Formulas for Binary Ionic Compounds

• These compounds
• End in -ide (except hydroxide and cyanide)
• Do NOT contain covalent prefixes
• To write these formulas
• Write the symbol charge of the first element
  (the metal, cation)
• Write the symbol charge of the second element
  (the non-metal, anion)
• Add more of the cations and/or anions to have a
  neutral compound
• Use subscripts to show how many of each type of
  ion is there.

106
Example 1
Sodium chloride
107
Na1
Cation
Sodium chloride
Anion
Cl-1
NaCl
108
Example 1
Na1
Cation
Na1Cl-1
Sodium chloride
1 -1 0
Anion
The compound is neutralno subscripts are needed.
Cl-1
NaCl
109
Example 2
Calcium bromide
110
Example 2
Ca2
Cation
Calcium bromide
Anion
Br-1
111
Example 2
Ca2
Cation
Ca2 Br-1
Calcium bromide
2 -1 1
Anion
Ca2 Br-1 Br-1
Br-1
2 -1 -1 0
CaBr2
The subscript 2 is used to show that 2 anions
are needed.
112
A Simple Method to Writing Binary Ionic Formulas

• The Criss - Cross Method
• Write the symbol charge of the first element
  (the metal, cation)
• Write the symbol charge of the second element
  (the non-metal, anion)
• Cross ONLY the charge numbers down diagonally to
  make subscripts IF they are not equal to each
  other
• Simplify subscripts if you can
• Ca 2 Br-1 ? Ca1Br2 ?
  CaBr2
• 1 2

113
Self Check
Cesium chloride Potassium oxide Calcium
sulfide Lithium nitride
Example Write the following chemical formulas
114
Answers
CsCl K2O CaS Li3N
Cesium chloride Potassium oxide Calcium
sulfide Lithium nitride
Example Write the following chemical formulas
115
Ternary Ionic Compounds

• compound containing at least one polyatomic ion
• Either in the front, the back or in both places

Cation
116
How to Identify Name Ternary Ionic Compounds

• These compounds
• Do not end with -ide (except hydroxide
  cyanide)
• Do not use covalent prefixes
• To write these formulas
• Write the symbol charge of the cation anion
• Add additional cations or anions to have a
  neutral compound
• Use subscripts to show the number of ions
• When using subscripts with a polyatomic ion, you
  must put the polyatomic ion in a parenthesis with
  the subscript on the outside

117
Example 3
Sodium carbonate
118
Na1
Cation
Sodium carbonate
Polyatomic Anion
CO3-2
119
Na1
Cation
Na1 CO32-
Sodium carbonate
1 -2 -1
Polyatomic Anion
Na Na CO32-
1 1 -2 0
CO3-2
Na2CO3
The subscript 2 is used to show that 2 cations
are needed.
120
Example 4
Magnesium nitrate
121
Mg2
Cation
Magnesium nitrate
Polyatomic Anion
NO3-1
122
Mg2
Mg2NO31-
Cation
2 -1 1
Magnesium nitrate
Mg2 NO3- NO3-
Polyatomic Anion
2 -1 -1 0
NO3-1
The subscript 2 is used to show that 2 anions
are needed.
Mg(NO3)2
Use parenthesis when adding subscripts to
polyatomic ions
123
Self Check
Sodium nitrate Calcium chlorate Potassium
sulfite Calcium hydroxide
Example Write the following chemical formulas
124
Answers
NaNO3 Ca(ClO3)2 K2SO3 Ca(OH)2
Sodium nitrate Calcium chlorate Potassium
sulfite Calcium hydroxide
Example Write the following chemical formulas
125
Transition Metals

• metal that has more than one possibility for
  cationic charge

126
How to Identify Name Ionic Compounds with
Transition Metals

• These compounds
• Will have roman numerals
• To write these formulas
• Same as binary ionic or polyatomic ionic.
• The roman numerals tell the charge of the metal
  (cation)

127
Example 5
Iron (III) oxide
128
Fe3
Cation
Iron (III) oxide
Anion
O-2
129
Fe3
Fe3 O2-
Cation
3 -2 -1
Iron (III) oxide
Fe3 Fe3 O2- O2-
Anion
3 3 -2 -2 -2 0
O-2
The subscript 2 and 3 are used to show the
numbers of atoms needed.
Fe2O3
130
Example 6
Copper (II) nitrate
131
Cu2
Cation
Copper (II) nitrate
Polyatomic Anion
NO3-1
132
Cu2
Cu2 NO31-
Cation
2 -1 1
Copper (II) nitrate
Cu2 NO3- NO3-
Polyatomic Anion
2 -1 -1 0
NO3-1
Use parenthesis when adding subscripts to a
polyatomic ion
Cu(NO3)2
133
Self Check
Iron (II) nitrate Copper (I) chloride Lead (IV)
hydroxide Tin (II) oxide
Example Write the following chemical formulas
134
Answers
Fe(NO3)2 CuCl Pb(OH)4 SnO
Iron (II) nitrate Copper (I) chloride Lead (IV)
hydroxide Tin (II) oxide
Example Write the following chemical formulas
135
Binary Covalent Compounds

• compound made from two non-metals
• between atoms that share electrons

Non metal
Non metal
136
How to Identify Name Binary Covalent Compounds

• These compounds
• Use covalent prefixes
• To write these formulas
• Write the symbols of the first and second element
• Use the covalent prefixes (assume the first
  element is 1 if theres no prefix) as the
  subscripts to show number of atoms.

Atoms do not form charges when bonding
covalentlyyou DO NOT need to worry about charges
with this type! NOR CRISS CROSS METHOD!
137
Example 7
Dinitrogen Tetraoxide
138
Di- 2
N
Dinitrogen Tetraoxide
O
Tetra- 4
N2O4
139
Example 8
Silicon dioxide
140
Mono- is not written for the first element
Si
Silicon dioxide
O
Di- 2
SiO2
141
CAUTION!!!
di and bi do not mean the same thing!
bi-
di-
Stands for 2 in covalent compounds
Means theres a hydrogen in the polyatomic anion
Carbon dioxide CO2
Sodium biphosphate Na2HPO4
142
Self Check
Carbon monoxide Sulfur tetraiodide Trichlorine
pentasulfide
Example Write the following chemical formulas
143
Answers
CO SI4 Cl3S5
Carbon monoxide Sulfur tetraiodide Trichlorine
pentasulfide
Example Write the following chemical formulas
144
(No Transcript)
145
Self Check Mixed Practice
Magnesium hydroxide Copper (II) nitrate Iron
(III) oxide Nitrogen dioxide Sodium bicarbonate
Example Write the following chemical formulas
146
Answers
Mg(OH)2 Cu(NO3)2 Fe2O3 NO2 NaHCO3
Magnesium hydroxide Copper (II) nitrate Iron
(III) oxide Nitrogen dioxide Sodium bicarbonate
Example Write the following chemical formulas