Hot Climate Initiatives - PowerPoint PPT Presentation

1 / 81
About This Presentation
Title:

Hot Climate Initiatives

Description:

Title: Weatherization Plus: Opportunities for Weatherization in the 21st Century Author: Jennifer Nicoud Last modified by: QMTLAP Created Date: 8/2/2000 2:27:25 PM – PowerPoint PPT presentation

Number of Views:74
Avg rating:3.0/5.0
Slides: 82
Provided by: Jennife860
Category:

less

Transcript and Presenter's Notes

Title: Hot Climate Initiatives


1
Hot Climate Initiatives
National Low-Income Energy Consortium Phoenix,
Arizona June 16, 2005
2
Hot Climate Initiative
  • Hot Climate Initiative started back in 1995
  • Shortly after getting started, Weatherization
    funding was cut almost in half and the Hot
    Climate Initiative was tabled
  • With recent increase in funding
  • Weatherization Plus strategies were implemented
  • Hot Climate Initiative was revisited

3
Hot Climate Initiative
  • State and agency representatives from hot climate
    regions of the country met in Phoenix in May 2001
  • Generated and prioritized list of action items
    including
  • Training Evaluation
  • Audit development Leveraging
  • Client education Priority lists
  • Review Appendix A Bulk purchasing
  • Multi-family Sources of new labor

4
Hot Climate Initiative
  • Hot climate states have received less
    Weatherization funding than cold climate states
    over the years
  • As a result, hot climate states have had less
    funds for technical training
  • While funding has increased recently, there still
    is not sufficient funding in many hot climate
    states to comprehensively train all agencies and
    contractors

5
Hot Climate Training Pilot
  • Visited Alabama and Mississippi in late 2001 to
    understand state of the program in Southeastern
    U.S.
  • Proposed a training pilot project, which DOE
    approved and funded
  • Enlisted NRCERT and JJ Weatherization to develop
    curriculum and provide both classroom and
    hands-on training

6
Training Efforts to Date
  • Completed Hot Climate/whole-house weatherization
    training in Mississippi, North Carolina,
    Tennessee, Alabama, and Georgia
  • First pilot in Mississippi
  • Phase I April-August 2002
  • Phase II April-June 2003
  • North Carolina and Tennessee requested training
    using the Mississippi model and funded with their
    TTA allocation
  • North Carolina July-November 2003
  • Tennessee January-May 2004
  • Pilot replicated in Alabama incorporating lessons
    learned
  • January-August 2004
  • Georgia
  • November 2004 April 2005

7
Training Content
  • Hot Climate training emphasizes whole-house
    weatherization, not just cooling-only measures
  • Even in hot climates, savings in heating energy
    drive cost-effectiveness of most measures
  • Reducing heating load also reduces cooling load

8
Training Structure
  • Orientation training for agency coordinators,
    followed by
  • Multiple regional trainings for agency
    coordinators, crews, and contractors

9
Orientation Training
  • Two days to introduce agency coordinators to
    whole-house weatherization approach
  • Share Virginias experience in adopting
    whole-house approach in early 1990s
  • Emphasize importance of combustion appliance
    safety
  • Introduce pressure diagnostics, advanced air
    sealing, and dense-pack sidewall insulation

10
Regional Training
  • Three one-week-long, on-the-job training sessions
    in different parts of the state
  • For agency coordinators, crews, and contractors
  • First day in classroom
  • Second third day in field
  • Last half-day test out and wrap up

11
Regional Training
  • Classroom training
  • Combustion appliance safety
  • CO, venting, combustion air, worst-case draft
  • Pressure diagnostics advanced air sealing
  • Building tightness limits, zone pressures, common
    bypasses, mechanical ventilation
  • Truck/trailer rigging (short field trip to the
    parking lot)

12
(No Transcript)
13
(No Transcript)
14
(No Transcript)
15
(No Transcript)
16
(No Transcript)
17
(No Transcript)
18
(No Transcript)
19
(No Transcript)
20
Regional Training
  • First day in the field
  • Assessment and estimation
  • Combustion appliance safety testing
  • Blower door testing and pressure diagnostics
  • Attic bypasses
  • Dense-pack sidewall demo before starting actual
    wall blowing
  • Two-part foam insulation demo
  • Refrigerator metering

21
(No Transcript)
22
(No Transcript)
23
(No Transcript)
24
(No Transcript)
25
(No Transcript)
26
Regional Training
  • Second day in the field
  • Switch into production mode
  • Continue blowing sidewalls
  • Seal bypasses
  • Blow attic
  • Install/repair/replace kitchen and bathroom
    exhaust fans, if necessary
  • Install dryer vent, if necessary
  • Insulate water heater and water heater pipes
  • Clean window air conditioners, if applicable

27
(No Transcript)
28
(No Transcript)
29
(No Transcript)
30
(No Transcript)
31
(No Transcript)
32
(No Transcript)
33
(No Transcript)
34
(No Transcript)
35
(No Transcript)
36
(No Transcript)
37
(No Transcript)
38
(No Transcript)
39
(No Transcript)
40
(No Transcript)
41
(No Transcript)
42
(No Transcript)
43
(No Transcript)
44
(No Transcript)
45
(No Transcript)
46
(No Transcript)
47
(No Transcript)
48
(No Transcript)
49
(No Transcript)
50
(No Transcript)
51
(No Transcript)
52
(No Transcript)
53
(No Transcript)
54
(No Transcript)
55
(No Transcript)
56
(No Transcript)
57
(No Transcript)
58
(No Transcript)
59
(No Transcript)
60
(No Transcript)
61
(No Transcript)
62
(No Transcript)
63
(No Transcript)
64
(No Transcript)
65
(No Transcript)
66
(No Transcript)
67
(No Transcript)
68
(No Transcript)
69
(No Transcript)
70
(No Transcript)
71
Regional Training
  • Final day
  • Finish installing any final measures
  • Test out
  • Clean up
  • Review equipment maintenance
  • Wrap up

72
(No Transcript)
73
(No Transcript)
74
(No Transcript)
75
(No Transcript)
76
Lessons Learned
  • The right people must attend training
  • Crews and contractors should attend, not just
    agency coordinators
  • Biggest obstacle to adopting the whole-house
    approach is prevalence of unvented gas/propane
    space heaters

77
Lessons Learned
  • While comprehensive, on-site, and hands-on, this
    training is just a start
  • Long-term commitment to consistent training is
    crucial
  • Monitors have to be on same page
  • Must go through same training
  • State organizational issues

78
Lessons Learned
  • Several agencies need to embrace the whole-house
    approach and lead others
  • Peer training is extremely effective
  • In-state agencies share experience
  • Agencies visit from another state
  • Creating or reinvigorating an agency association
    increases communication

79
Implementation Barriers
  • Requires strong state program management
  • Investment in equipment and ongoing training is
    significant, but necessary
  • Some agencies are hesitant to adopt
    whole-house-based priority list and de-emphasize
    windows and doors
  • Potential loss of existing contractors

80
TrainingFollow-Up
  • Develop technical program standards to reflect
    whole-house approach
  • Revise agency contracts to reflect standards
  • Monitor, monitor, monitor
  • Standardize training and provide on an on-going
    basis
  • Comprehensive monitor training
  • Give agencies the chance to succeed, but firmly
    enforce technical program standards

81
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com