K-Tool

1
K-Tool
SECTION Tools and Equipment ISSUED
02-2011 REVISED -
2
Objectives

• To provide an understanding of the following
• Specifications
• Use
• Maintenance
• Safety

3
Specifications

• Steel block
• Replaceable harden steel blades
• K-shaped notch that grips lock cylinder
• U-shaped flange on opposite side

4
Use

• Through the lock forcible entry
• Pulls lock cylinders
• Rim or mortise
• Used in conjunction with irons and key tool

5
Maintenance

• Check for cracks and burrs
• File any burrs on blades
• Ensure blades are secure
• Remove rust with wire wheel or brush
• Clean with warm soapy water
• Dry thoroughly
• Apply thin coat of WD40 to prevent rusting

6
Key Tool
7
Specifications
Shove knife
Flat end key
Square key
V point key
Cam end key
8
Use

• Manipulates internal locking mechanism
• Mortise lock
• Rim locks
• Cylinder locks

9
Maintenance

• Ensure keys move freely
• Ensure keys are not bent
• Clean with warm soapy water
• Dry thoroughly

10
Safety

• Wear appropriate PPE
• Minimum of helmet, gloves, and eye protection
• Full turnouts and SCBA are required when
  utilizing the tool in an IDLH atmosphere or when
  making entry into a possible IDLH atmosphere
• Check surroundings prior to using tool
• Ensure the tool is the right tool for the job