Startup program, 1

1
Startup program, 1

• Machine setup (i.e. R\Controls\matlab\accelerator
  control\docs\SRSetupUsingMatlab_ALS.doc)
• Bergoz BPM/orbit checks monbpms, correct orbit,
  PSD, set averaging, aperture scans?, monrates?
• PS checkout monmags check that quad shunt is
  off magstep? monrates?
• QMS establish offset orbit and golden orbit (w/
  septum bump) include alignment data? include
  magnet fiducialization?
• LOCO correct betas and coupling, set BPM gains,
  check corrector gains
• measure xs
• orbit interlock calibration verification trip
  speed check
• Current interlock check ACM checks
• Radiation measurements (1 hour for scrapers)
• BTS
• Fix optics
• Investigate efficiency vs. steering (aperture?)
• Echotek BPMs
• Collect calibration data for Till
• Check kicker bump match w/ echoteks
• Dynamic aperture/kicker/echotek/scraper
  calibration
• Dynamic aperture vs. frf vs. vertical scraper
• Injection efficiency vs. vertical and horizontal
  scraper
• Requires clearing floor?

2
Startup program, 2

• Bergoz
• BPM filter test
• Current dependence measurements
• Test tone calibration
• High current

3
Hot issues

• If our dynamic aperture is really 18 mm, why do
  we only get 75 injection efficiency?
• Echotek dynamic aperture (14 mm) not K3 dynamic
  aperture (18 mm)
• Injection efficiency vs. vertical aperture
• Lifetime vs. vertical aperture
• Injection and lifetime vs. dynamic aperture
• BL5 EPU skew correction