Title: Ch 6: Bonding, Formulas and Naming Notes
1Ch 6 Bonding, Formulas and Naming Notes
2Bonding Objectives
Chem 5.0 Bonding, Formulas and Naming - OBJECTIVES
Describe Ionic Bonding Theory.
Describe Covalent Bonding Theory.
Write formulas and names for ionic compounds
including binary, tertiary and polyvalent.
Write formulas and names for molecules
(covalent compounds.)
Write formulas and names for hydrates.
Write formulas and names for binary and
tertiary acids.
Write Lewis-Dot structures for ionic compounds.
Write structural formulas for covalent
compounds.
Describe electronegativity and how it affects
bond type ionic, polar covalent and
nonpolar covalent.
3Types of Chemical Bonds
- A. Ionic Bonding
- 1) Positively charged ions are attracted to
negatively - charged ions, making a neutral compound.
- 2) Properties of Ionic Compounds
- a) high melting points.
- b) dissolve in water to form solutions
that are good conductors of electricity
(electrolytes). - c) have a large electronegativity difference
- between elements.
- d) usually form between metals and nonmetals.
43) The Octet Rule
- a) Atoms tend to gain or lose electrons in order
to acquire a full set of valence electrons
(stable octet). - b) Atoms will transfer electrons (e-) to each
other in order to have a full set of valence
electrons. - c) When electrons are transferred, ionic bonds
are formed.
54) Types of Compounds
- a) Binary form from monatomic ions have 1
cation and 1 anion. - Ex) Mg2 O-2
- Ca2 Cl-1
MgO
CaCl2
6Writing Ionic Formulas
This may not be on your notes, but if you dont
know how to do this it will severely affect your
grade
7- When chemical symbols are by them selves they
are called elements - But when chemical symbols combine, they are
called......
Chemical Formulas
8Chemical Formulas
- Chemical formulas represent different compounds
(chemical substances) - If chemical symbols are the letters of
chemistry, then chemical formulas make up the
words - Examples in a jif
9Chemical Formulas
- H2O Fe2Cl HI CH4
- C6H12O6 CaCO3 SF6
10Chemical Formulas
- Subscripts tell us how many atoms of the
respective element that are present in that
chemical substance - H2O The 2 tells us that there are 2 atoms of
Hydrogen for every 1 atom of Oxygen present in
water. - If there is no subscript present, then it means
that there is only one atom present in that
substance
Methane Methane has four Hydrogens around one
central Carbon CH4
11Criss Cross Method of Formula Writing
Fe3 O2- ? Fe2O3
Fe
O
3
-2
Fe2O3
Criss-Cross will make ya JUMP JUMP!
12Criss Cross Method of Formula Writing
Na1 Br-1 ? NaBr
Na
Br
1
-1
Na Br
13 1 - 2 Not Balanced
Na 1
O -2
Na 1
Na 1
O -2
1 x (-2) -2
2 x (1) 2
2 (- 2) 0 Balanced Na2O
143 -2 Not Balanced
O -2
Al 3
Al 3
O -2
Al 3
O -2
O -2
3 x (-2) -6
2 x (3) 6
6 (- 6) 0 Balanced Al2O3
154) Types of Compounds
- b) Tertiary form from polyatomic ions which
consists of a group of atoms covalently bonded
with a single charge that bond ionically with
other ions. - Ex.
-
- ammonium sulfate ,
NH41
SO4-2
(NH4)2SO4
16Criss Cross Method of Formula Writing with
Polyatomic Ions
NH41 O-2 ? (NH4)2O
NH4
O
1
-2
(NH4)2O
175) Polyvalent Metals
- Some metals including, but not limited to the
transition metals do not follow the octet rule
and may form more than 1 kind of cation. These
ions are named with roman numerals to
distinguish between them. - Ex) Fe2 iron (II) read iron two
- Fe3 iron (III) read iron three
- FeCl2
- FeCl3
- Copper (I) sulfate
- Copper (II) phosphate
iron (II) chloride
iron (III) chloride
Cu2SO4
Cu3(PO4)2
18Naming Ionic Compounds
19Rules for Naming Ionic Compounds
- For the Cation
- Borrow the name of the element
- Ex. K is the Potassium Ion
- Ex. Zn2 is the Zinc Ion
- If an ion has more than one oxidation state
- Cu1 is copper one ion
- Cu2 is copper two ion
20Rules for naming the anion
- Anion- the negatively charged atom
- Use the name of the element followed by the
suffix -ide - Cl- is the Chloride ion
- O-2 is the Oxide ion
- P-3 is the Phosphide ion
21Naming Ionic Compounds
- When naming ionic binary compounds
- Name the cations element name followed by the
anions name - NaCl is Sodium Chloride
- K2O is Potassium Oxide
- CuCl2 is Copper (II) Chloride
- Mg3N2 is Magnesium Nitride
- Al2S3 is Aluminum Sulfide
22Naming Ionic Compounds with Polyatomics
- Name the Cation
- Name the Polyatomic ion
- Ex. Mg3(PO4)2
- Magnesium Phosphate
23Name this compound
X
- FeO
- If thats correct, name this
- Fe2O3
- How can we distinguish between these compounds?
- What is the charge on the oxygen in each
compound? Then what is the charge on the iron in
each compound? - Fix the name of the first compound
Iron (II) oxide
Iron oxide
Fe2 O-2
Iron (III) oxide
Fe3 O-2
24Bonding Objectives
Chem 5.0 Bonding, Formulas and Naming - OBJECTIVES
Describe Ionic Bonding Theory.
Describe Covalent Bonding Theory.
Write formulas and names for ionic compounds
including binary, tertiary and polyvalent.
Write formulas and names for molecules
(covalent compounds.)
Write formulas and names for hydrates.
Write formulas and names for binary and
tertiary acids.
Write Lewis-Dot structures for ionic compounds.
Write structural formulas for covalent
compounds.
Describe electronegativity and how it affects
bond type ionic, polar covalent and
nonpolar covalent.
256) Lewis Dot Diagrams for elements
Element of val. Electrons Dot Diagram
Li Li?
N
Be
F
Ne
Au
1
5
2
7
8
2
Note Only show s and p orbitals in dot diagram.
26- Electron Dot Diagram for Atoms and Ions
277) Lewis-dot diagram for sodium chloride
Na -
28Lewis-dot diagram for NaCl
Ionic Bond Formed
Na
Na
Na
-
Na -
29Bonding Objectives
Chem 5.0 Bonding, Formulas and Naming - OBJECTIVES
Describe Ionic Bonding Theory.
Describe Covalent Bonding Theory.
Write formulas and names for ionic compounds
including binary, tertiary and polyvalent.
Write formulas and names for molecules
(covalent compounds.)
Write formulas and names for hydrates.
Write formulas and names for binary and
tertiary acids.
Write Lewis-Dot structures for ionic compounds.
Write structural formulas for covalent
compounds.
Describe electronegativity and how it affects
bond type ionic, polar covalent and
nonpolar covalent.
30B. Covalent Bonding
- 1) Covalent Bonds are formed by sharing pairs of
- electrons between 2 atoms.
- 2) Usually formed between two nonmetals with a
low electronegativity difference. - 3) Molecules
- a) a group of atoms held together by covalent
- bonds
- b) molecular substance contains molecules
314) Naming
- uses prefixes 1 mono- 4 tetra- 7 hepta-
10 deca- - 2 di- 5 penta- 8 octa-
- 3 tri- 6 hexa- 9 nona-
- b) end in ide
- c) More electronegative element is written last
- d) Only use a prefix on the first element if it
is more than one. - e) Always use a prefix for the second element.
- Ex) water H2O dihydrogen monoxide
- smog NO2 nitrogen dioxide
32SF6 (Sulfur Hexafluoride)
335) Types of formulas for covalent bonding
- a) Molecular Formula shows how many atoms make
up a compound. - ex. CH4 H2O
- b) Structural Formula shows how the atoms are
bonded to each other. - ex.
34- 1. Uses 2 dots to show an unshared pair of
- electrons.
- 2. Uses dashes to represent covalent bonds (a
- shared pair of electrons) in a structural
formula. - 3. The octet rule should be satisfied for each
element in the compound. - c) Empirical Formula is the lowest whole number
ratio of all the elements in the compound. - Ex) C6H6 CH
- C6H12O6 CH2O
356) Multiple Bonds can be used to satisfy
the octet rule
- Single Bonds Share 1 pair of electrons.
- Ex) methane or phosphorous trichloride
36- Double Bonds Share 2 pairs of electrons.
- Ex) formaldehyde
37- Triple Bonds Share 3 pairs of electrons
(strongest bond). - Ex) ethyne
38(No Transcript)
39Bonding Objectives
Chem 5.0 Bonding, Formulas and Naming - OBJECTIVES
Describe Ionic Bonding Theory.
Describe Covalent Bonding Theory.
Write formulas and names for ionic compounds
including binary, tertiary and polyvalent.
Write formulas and names for molecules
(covalent compounds.)
Write formulas and names for hydrates.
Write formulas and names for binary and
tertiary acids.
Write Lewis-Dot structures for ionic compounds.
Write structural formulas for covalent
compounds.
Describe electronegativity and how it affects
bond type ionic, polar covalent and
nonpolar covalent.
408) Properties of Covalent Bonds
- a) Low melting points, brittle, strong odor, poor
conductors of electricity. - b) Polar Bonds form between elements with large
differences in electronegativity. These have an
uneven sharing of electrons. - Ex) water
41Ionic or Covalent?
- Polar-covalent bonding- a covalent bond in which
the bonded atoms have an unequal attraction for
the shared electrons
In the fight for electrons, Igor wins (most of
the time)
42- c) Nonpolar bonds exert equal pull on the
electrons. - Ex) O2
43Ionic or Covalent?
- Nonpolar covalent bonding- A covalent bond in
which the bonding electrons are shared equally by
the bonded atoms, resulting in a balanced
distribution of electrical charge
44- 9) Electronegativity Chart is used to determine
bond type - non polar covalent polar covalent
ionic bonds
0
1.9
0.4
4.0
even sharing
electrons transferred
uneven sharing
45C. Ionic Covalent Bonds Summary
Ionic Bonding Covalent Bonding
metal-nonmetal
nonmetal-nonmetal
e- transferred
e- shared
large electronegativity difference (gt1.9)
electronegativity difference (0 ?1.9)
ions formed
no ions
written cation () anion (-)
more electronegative element written last
name cation - name anion
use prefixes/ends in ide
forms ionic compound (formula unit) in a crystal
lattice
forms molecules
Written with a chemical or empirical formula
Written with a molecular or structural formula
NaCl sodium chloride
CCl4 carbon tetrachloride
46(No Transcript)
47carbon tetrachloride
48Bonding Objectives
Chem 5.0 Bonding, Formulas and Naming - OBJECTIVES
Describe Ionic Bonding Theory.
Describe Covalent Bonding Theory.
Write formulas and names for ionic compounds
including binary, tertiary and polyvalent.
Write formulas and names for molecules
(covalent compounds.)
Write formulas and names for hydrates.
Write formulas and names for binary and
tertiary acids.
Write Lewis-Dot structures for ionic compounds.
Write structural formulas for covalent
compounds.
Describe electronegativity and how it affects
bond type ionic, polar covalent and
nonpolar covalent.
49D. Acids
- 1) A molecular compound that dissolves in water
to produce H and a characteristic anion. - 2) In water, acids behave like ionic compounds.
- 3) Most acid formulas begin with H. (Except
organic acids) COOH - 4) The number of hydrogens in the formula depends
upon the charge of the anion.
505)Types of Acids
- a.) Organic Acids contain the carboxylic group,
- -COOH or
- Ex) CH3COOH acetic acid (vinegar)
51b.) Binary Acids contain hydrogen and 1 type of
anion.
- A two-word name is used for binary acids.
- 1st word prefix is hydro
- root is formed from the anion
- anion suffix ide is changed to ic
- 2nd word is acid
- Ex) HCl anion is chloride
hydrochloric acid - Prefix root suffix
- HBr anion is bromide hydrobromic acid
52c.) Oxo (Tertiary) Acids contain oxygen within a
polyatomic ion.
- A two-word name is used for oxo acids.
- H2SO4
- H2SO3
- sulfur or phosphor (to sound better)
- 2nd word is acid
- If you ate something you dont like,
- you say ic
sulfate
sulfuric acid
sulfite
sulfurous acid
53- HNO3 anion is nitrate nitric
acid - root suffix
- H3PO3 anion is phosphite
- Nitrous acid, anion is formula is
- Phosphoric acid, anion is
- formula is
phosphorous acid
nitrite
HNO2
phosphate
H3PO4
54E. Hydrates
- 1.) Ionic compounds that absorb H2O into their
solid structures. - Ex) magnesium sulfate heptahydrate (epsom salt)
- Formula MgSO4 ? 7H2O
- 2.) Anhydrous substance substance without water
MgSO4 - Ex) CuSO4 5H2O
- CuSO4 anhydrate (light blue/white)
copper (II) sulfate pentahydrate (bright blue)