Hot Water and Steam - PowerPoint PPT Presentation

1 / 11
About This Presentation
Title:

Hot Water and Steam

Description:

... Caused by condensate in steam pipes Dampening/prevention ... Tankless Hot Water Heaters Classified by fuel sources Natural gas Propane Fuel oil Electric ... – PowerPoint PPT presentation

Number of Views:385
Avg rating:3.0/5.0
Slides: 12
Provided by: DrCha57
Category:
Tags: condensate | hot | steam | water

less

Transcript and Presenter's Notes

Title: Hot Water and Steam


1
Hot Water and Steam
  • Plumbing Systems
  • CNST 305
  • Environmental Systems 1
  • Dr. Berryman

2
Hot Water Considerations
  • Hot Water Burns People
  • Hot water is corrosive
  • Every 20o F double corrosive qualities
  • Electrolysis develops between dissimilar
    materials highly temperature dependant

3
Hot Water Considerations
  • Bacteria can breed (i.e. Legionella)
  • Dormant at 68o F
  • Highest point of reproduction 110 120o F
  • Recirculation
  • Hot water on demand
  • Recovery vs Storage
  • Tank storage (70 usable)
  • Tankless

4
Hot Water Heaters
  • Classified by fuel sources
  • Natural gas
  • Propane
  • Fuel oil
  • Electric
  • Steam

5
Steam
  • Phase change from water
  • Liquid to gas
  • Increases it volume 1700 times this expansion
    allows moves heat through pipe
  • One pound of steam releases about 1000 BTU
  • Safety devices
  • Pressure relief valves (set at 150 210oF)
  • Gas shutoff valves

6
Domestic Hot Water Heaters
7
Commercial Heaters
  • Semi-Instantaneous
  • Instantaneous
  • Heat exchanger

8
Design Considerations for Hot/Cold Systems
  • Noise
  • Water Hammer (shock wave)
  • Caused by quick closing valves (water)
  • Caused by condensate in steam pipes
  • Dampening/prevention devices
  • Shock absorber and air chambers
  • Steam traps
  • Steam system start up

9
Design Considerations for Hot/Cold Systems
  • Pressure loss
  • Factors that affect pressure loss
  • Starting pressure
  • Booster pump
  • City main
  • Ending pressure
  • Needed at fixture (i.e. tank water closets 15
    psi)
  • Friction loss in pipe, fittings, and valves
  • Pressure needed to lift water
  • Water weighs 62.4 lbs per cubic feet
  • 1 psi lifts water 2.307
  • Static pressure 0.433 psi per foot of pipe

10
Class Exercise
  • A multi-story building has access to a water
    main. Ignoring friction, how many floors will
    this system effectively serve?
  • Given
  • 50 psi main
  • 12 per floor
  • Ignore affects of pipe and fitting friction
  • Fixture requirements 25 psi for Flush Tank
  • 25 psi available (less flush tank requirement)
  • (12)(0.433)5.2 psi loss per floor
  • 25/5.2 4.8 or 4 stories

11
Next Time
  • Sizing Water Systems
Write a Comment
User Comments (0)
About PowerShow.com