INTEGRATED DESIGN SYSTEM

1
INTEGRATED DESIGN SYSTEM

• AUTOCAD
• STAAD
• STR. DESIGN SYSTEM
• MICRO SOFT EXCEL

2
SR Consultants, Kerala, India
Structural Design Detailing Software (SDD)

• 28/ 3545 Chilavanoor road,
• Devi View, Elamkulam, Kochi 20,
• Ernakulam, Kerala, India
• 9846026162
• Email srconsultants_at_eth.net
• Web www.sandrconsultants.com

3
WORK FLOW
4
Contents

• Slab
• Beam
• Column
• Footing
• Combined Footing
• Pile
• Pile Cap
• DMC Under Reamed Pile

5
WORK FLOW BREAK DOWN

• AUTOCAD ARCH
• SLAB DETAILING
• STAAD INPUT
• STAAD FILE EDITING
• STAAD TO SDS
• SDS TO AUTOCAD
• SDS TO BAR BENDING MODULE TO EXCEL

6
Integration of Software
7
Integration of Methods
8
SlabSectionDesign
9
SlabAnalysis
10
BeamSectionDesign
11
Footing
12
Footing-Design
13
Pile1
14
Pile2
15
Pile3
16
Tbeam
17
Column1
18
Column2
19
Retaining Wall
20
Steel2
21
Advantage of BBS system

• Acute bending can cause failure in high strength
  Fe 500 bars. Bar bending schedules and bar
  bending as per schedule is recommended to avoid
  the above problem. Fe 500 saves 10 compared to
  Fe 415 steel used presently.
• Reduce cutting wastage, as certain steel
  suppliers can give you exactly the same length
  required. (5). Also as the exact length of the
  bars are provided the workers making an error in
  the cutting is also reduced.
• Better quality control at site
• Better Estimation of steel
• Real time estimation data, with the design
• Better control on stock of steel actually required

22
Advantage of BBS

• Economical order quantity or better project
  management or bench marking
• Optimize your design based on the quantity of
  steel.
• Steel bending and cutting can commence even
  before the form work is done
• Steel bending can be done at a separate site,
  marked and then can be assembled at site
• Project time can be reduced
• What you see in the drawing is what you get at
  the site
• With a quality data set, other management
  softwares can work on it.
• A paper less office concept in the construction
  industry and associated advantages.
• Total length of bars calculated is using
  Engineering formula
• Mechanization of bending and cutting is possible.
  (Cut and bend systems) Reduces labour and time
  but increases the reliability.
• Reduction in column and other member sizes

23
BBS SHAPE CODES
24
BBS
25
SLAB BOTTOM BAR
26
SLAB TOP BAR
27
BEAM LAYOUT
28
BEAM DETAIL