Orthogonal-Transfer Charge-Coupled Devices and Low-Noise Charge-Coupled Devices Readout Circuits* - PowerPoint PPT Presentation

About This Presentation
Title:

Orthogonal-Transfer Charge-Coupled Devices and Low-Noise Charge-Coupled Devices Readout Circuits*

Description:

Charge-Coupled Devices and Low-Noise Charge-Coupled Devices Readout Circuits* Barry E. Burke *The MIT Lincoln Laboratory portion of this work was performed under a ... – PowerPoint PPT presentation

Number of Views:184
Avg rating:3.0/5.0
Slides: 21
Provided by: Barr161
Learn more at: http://ridl.cfd.rit.edu
Category:

less

Transcript and Presenter's Notes

Title: Orthogonal-Transfer Charge-Coupled Devices and Low-Noise Charge-Coupled Devices Readout Circuits*


1
Orthogonal-Transfer Charge-Coupled Devices and
Low-Noise Charge-Coupled Devices Readout
Circuits
  • Barry E. Burke

The MIT Lincoln Laboratory portion of this work
was performed under a Collaboration Agreement
between MIT Lincoln Laboratory and The University
of Hawaii, Institute for Astronomy (IfA).
Opinions, interpretations, conclusions, and
recommendations are those of the authors, and do
not necessarily represent the view of the United
States Government.
2
Outline
  • Review of Orthogonal-Transfer Charge-Coupled
    Devices (OTCCD)
  • Development of the orthogonal transfer array
    (OTA)
  • Low-noise CCD readout circuits
  • Summary

3
Conventional vs. Orthogonal-Transfer CCDs
4
Application Areas
Videoout
  • Compensation of platform motion
  • Imaging from unstable and/or moving platforms
  • TDI (time delay and integrate) with variable scan
    direction
  • Compensation of scene motion
  • Ground-based astronomy

Output register
Frame store
Imaging area
OTCCD can noiselessly compensate for scene motion
across sensor during image integration
5
Application of OTCCDs in Astronomy
Star-cluster imagery (M71)
  • Use OTCCD to remove blurring due random motion of
    star images (electronic tip-tilt)

No motion compensation, ??0.73"
With motion compensation, ??0.50 SNR increase
1.7?
6
Outline
  • Review of Orthogonal-Transfer Charge-Coupled
    Devices (OTCCD)
  • Development of the orthogonal transfer array
    (OTA)
  • Low-noise CCD readout circuits
  • Summary

7
Pan-STARRS(Panoramic Survey Telescope and Rapid
Response System)
  • Four 1.8-m telescopes viewing same sky sector
  • 3 FOV, 24 mv sensitivity
  • High-cadence, wide-field surveys
  • Detect variable or moving objects
  • 1.4-Gpixel CCD focal-plane array on each telescope

Proposed Pan-STARRS telescope configuration
Gigapixel focal-plane array (64 CCDs)
First Pan-STARRS telescope on Haleakala (PS1)
8
Orthogonal-Transfer Array
2.38 arc min
  • Wide field-of-view (FOV) imaging
  • Wavefront tilt decorrelates over FOV gt few arc
    minutes
  • Need 2D array of OTCCDs, each independently
    clocked to track local wavefront tilt (rubber
    focal plane)
  • OTA is a new CCD architecture
  • Requires on-chip switching logic
  • More complex layout and processing than
    conventional CCDs

9
Orthogonal Transfer Array
OTA 8?8 array of OTCCD cells
OTA cell with I/O control
Four-phase OTCCD pixels
  • New device paradigm
  • 2D array of independent OTCCDs
  • Independent clocking and readout of OTCCDs
  • Advantages
  • Enables spatially varying tip-tilt correction
  • Isolated defective cells tolerable (higher yield)

10
OTA Operation
  • Subset (4 5) of cells chosen to image guide
    stars
  • Map of wavefront tilt constructed from guide-star
    data and applied to science cells
  • Four redundant views of every patch of sky used
    to fill gaps due to
  • Guide-star cells
  • Dead cells
  • Cosmic rays
  • Dead areas between cells and devices

11
Device Fabrication
  • Four OTAs on 150-mm wafer (die size 49.5?50.1 mm)
  • Four-poly, n-buried-channel process
  • Fabricated on 5 000 ?cm float-zone silicon
    wafers
  • Back-illuminated devices thinned to 75 µm

150-mm wafer with four OTAs
Photo of pixel array
12
Sample Imagery
  • First devices were fully functional but with some
    issues (noise, logic glow)
  • Device redesign resolved issues with prototype
    devices
  • Redesigned devices have been fabricated and most
    of them packaged

Image from back-illuminated OTA 10-µm pixel, 22.6
Mpixels
Image from OTA cell with fixed light spot and CCD
gates clocked
13
Substrate Bias
  • Substrate bias enables thick, fully depleted
    devices
  • High quantum efficiency, 800-1000 nm
  • Small charge point-spread function

14
Quantum Efficiency
  • Back-surface p using ion-implant/laser anneal
  • Two-layer anti-reflection coating with reflection
    null at 850 nm for reduced fringing
  • Thicker device clearly superior beyond 800 nm

15
OTA Focal Planes
  • TC3 focal plane assembled from 16 prototype
    devices on-sky tests in February
  • GPC1 assembled from lots 2 and 3 (summer 2007)

16
Outline
  • Review of Orthogonal-Transfer Charge-Coupled
    Devices (OTCCD)
  • Development of the orthogonal transfer array
    (OTA)
  • Low-noise CCD readout circuits
  • Summary

17
CCD Output Circuits
18
Output Circuit Comparison
Sense-node capacitance is lower (?higher
responsivity) for JFET than MOSFET
Noise spectral voltage is lower for JFET than
MOSFET
19
Noise Comparison
2000-fps, 160?160-pixel imager, 20 ports with
JFET output circuits
Best MOSFET noise vs. preliminary JFET noise
20
Summary
  • OTCCD developed for astronomical applications but
    has a potentially much broader range of uses
  • OTA development for Pan-STARRS is new OTCCD
    concept, also with other applications
  • Recent work with JFETs shows noise levels better
    than BCMOSFETs and nearing 1 e-
Write a Comment
User Comments (0)
About PowerShow.com