ENSC 412612 Week 2 Air Quality, Standards, Sources - PowerPoint PPT Presentation

1 / 39
About This Presentation
Title:

ENSC 412612 Week 2 Air Quality, Standards, Sources

Description:

Also when products are made into new products: cars from steel. furniture from lumber ... A list of the amount of pollutants from all sources entering the air ... – PowerPoint PPT presentation

Number of Views:27
Avg rating:3.0/5.0
Slides: 40
Provided by: cirru
Category:

less

Transcript and Presenter's Notes

Title: ENSC 412612 Week 2 Air Quality, Standards, Sources


1
ENSC 412/612 Week 2Air Quality, Standards,
Sources
  • READINGS FOR THIS WEEK
  • Text CHAPTERS 4,6,22

2
Air Quality
  • Ambient air quality -- refers to concentrations
    of pollutants in OUTDOOR AIR (differentiate from
    INDOOR AIR POLLUTION)
  • Pollutant concentrations are highly variable in
    space and time WHY?

3
  • variations in emission rate
  • variations in transport and diffusion mechanisms
    in atmosphere
  • scavenging and conversion in the atmosphere --
    pollutant half-life
  • Ambient concentrations are typically cyclic
    What are the cycles?

4
  • annual variation in PM10 shows influence of dust
    episodes in late winter / early spring as roads
    dry out
  • PM2.5 levels are highest in fall and winter due
    to combustion combined with stagnation events

NOTE figures from Suzuki and Wallis, 2003.
5
  • PM10 diurnal variation responds to traffic
    (dust)
  • PM2.5 can see the influence of fumigation
    events (late morning) on the 95th and 98th
    percentiles

6
  • hebdomodal variability shows higher levels of
    PM10 during the week reflecting traffic and work
    patterns that generate dust (episodes caused by
    dust sources)
  • PM2.5 have somewhat lower median and mean values
    during weekends, but 95 and 98th percentile
    values show no weekly trend (episodes caused by
    combustion sources which operate 24/7)

7
Cycles of ambient pollutant levels
  • diurnal (source strength, transport and
    diffusion)
  • weekly (weekend vs weekday emission differences)
  • seasonal (source strength, transport and
    diffusion)

8
Diurnal cycle
9
Impact of averaging time
10
Trends
  • Changes from year to year are trends.

11
Trends in PM10/PM2.5
1995
1997
1999
2003
2005
2007
2001
12
National Trends in O3 and PM2.5
  • Ozone
  • PM2.5

13
Primary and secondary pollutants
  • Substances emitted directly to the atmosphere are
    PRIMARY POLLUTANTS.
  • Chemical reactions among primary pollutants and
    with the atmosphere form SECONDARY POLLUTANTS.

14
Responses to Air Pollution
15
(No Transcript)
16
(No Transcript)
17
Sources - Natural
  • volcanos - particulates, SO2, H2S, methane, etc.
    can affect globe
  • forest fires - smoke, unburned HC, CO, CO2, NOx,
    ash
  • dust storm
  • oceans - salt aerosols
  • plants / trees - major source of HC - blue
    haze'' over forests is a reaction of volatile
    organics
  • pollen, bacteria, rust, etc.

18
Sources - Anthropogenic
  • Industrial stationary, consistent emissions,
    mostly from manufacturing products from raw
    materials
  • iron from ore
  • lumber and paper from trees
  • gas from crude oil
  • stone from quarries
  • Also when products are made into new products
  • cars from steel
  • furniture from lumber
  • paint from solids and solvents
  • asphalt from rock and oil

19
Anthropogenic Sources contd
  • 2. Utilities Power generation (e.g. coal
    burning to generate electricity) sewage
    treatment (sludge burning) burning dump (not
    common anymore)
  • 3. Personal sources
  • automobiles
  • home furnaces
  • home fireplaces
  • BBQ
  • backyard burning of garden wastes

20
Personal Sources
  • In our society, total personal sources are
    greater than both industrial and utility sources
    combined. Personal sources are probably the most
    difficult to control since they require the
    cooperation (subjugation?) of a large number of
    individuals and usually involve extra expense
    and/or lifestyle changes, eg
  • regulations
  • lifestyle changes
  • change fuel to one with less emissions
  • improve efficiency
  • change form of pollution (eg. haul leaves to the
    dump instead of burning them)

21
Combustion
  • One of the most widely used but least understood
    chemical reactions (it is a free radical chain
    reaction).
  • the rapid union of a substance with oxygen
    accompanied by the emission of light and heat.
  • used mostly for heat by changing the potential
    chemical energy of the fuel to thermal energy.
  • also used as a means of destruction of unwanted
    materials. The volume of solids is reduced,
    combustible gases with odours etc., are converted
    to less objectionable gases.
  • C O2 ? CO2  
  • 2H2 O2 ? 2H2O 

22
  • Products of burning are carbon dioxide and water,
    which are odourless and invisible.
  • Problems occur because the process also produces
    other products, many of which are pollutants
    carbon monoxide, carbon dioxide, oxides of
    sulfur, oxides of nitrogen, smoke, fly ash,
    metals, metal oxides, metal salts, aldehydes,
    ketones, acids, polynuclear hydrocarbons, etc.
  • It was only recently that these by products were
    considered important due to their negative
    impacts.

23
  • Efficient combustion requires 3T's
  • time (to occur fully),
  • temperature (to initiate and maintain), and
  • turbulence (to ensure that the reacting fuel and
    oxygen molecules in the combustion process are in
    intimate contact).
  • The physical state of the fuel determines how
    combustion will occur.
  • A fuel can be a volatile material - burns with a
    flame fixed carbon - no visible flame or both.

24
(No Transcript)
25
  • Gaseous fuels burn easily
  • liquid fuels must first be vapourized either by
    supplying heat, or by atomizing the fuel and then
    spraying it into a heated combustion chamber to
    accomplish gasification.
  • solid fuels such as coal or wood require several
    steps to burn (drying, distillation, carbon
    burning, ash discharge)

26
(No Transcript)
27
  • Typical emissions from combustion

28
Stationary Sources
  • See text Chapter 6 for a discussion of various
    stationary sources. (Chemical, Resins and
    Plastics, Varnish and Paints, Acid manufacture,
    Soaps and detergents, Phosphate fertilizers,
    Inorganic chemicals, Petroleum and coal, Primary
    metals, Stone and clay products, Forest products,
    Noxious trades (smell, eg animal processing).

29
Mobile Sources
  • Vehicles powered by different types of engines,
    using different fuels.
  • Largest source in western society.

30
(No Transcript)
31
Emission Inventories
  • A list of the amount of pollutants from all
    sources entering the air of a given area over a
    given period of time.
  • This information is very useful to control
    agencies, as well as land use planners
  • what are the sources and what are their relative
    sizes?
  • Can be used
  • as input into dispersion models to predict
    ambient pollution levels,
  • design a sampling network (both location and type
    of sampling), and
  • assess impact of pollutants on various areas.

32
EI- continued
  • Estimation methods are error prone however.
    Creating an inventory involves the following
    steps
  • list types of sources in an area
  • determine which pollutants are emitted from each
  • find emission factors for each pollutant (amount
    of pollutant produced for each unit of input into
    the process, eg fuel)
  • determine number and size of specific sources in
    area
  • multiply numbers and sum to find total emissions
  • There is a lot of variation in emission factors.
  • Emission factors for a number of sources can be
    found at the US EPA's web site (http//www.epa.gov
    ).

33
Air Quality Standards
  • Objective of air quality management is to control
    emissions so that ambient concentrations do not
    exceed standards.
  • Toward this the federal NAAQO's were established
    (National Ambient Air Quality Objectives).
  • There are three criteria levels
  • level A - maximum desirable'' long-term goal
    and is also the basis for an anti-degradation
    policy in unpolluted areas
  • level B - maximum acceptable'' provide
    adequate protection against effects of pollutants
    on human health and discomfort, soil, water,
    vegetation, animals, and visibility.
  • level C - maximum tolerable'' concentration
    beyond which action is required quickly to
    protect health of general population.

34
1.
2.
3.
4. Also for PM2.5 Canada Wide Standard in
2010 will be 98th percentile of 30 µg / m3
averaged over 3 years (can exceed 30 only 2 of
the time 7 days / year), and BCMoE have a PM2.5
objective of 25 µg / m3 for a 24 hour average, 8
µg / m3 for an annual average with 6 µg / m3 as
the goal.
35
  • Levels are defined based on laboratory and
    epidemiological experiments and studies.

36
(No Transcript)
37
(No Transcript)
38
(No Transcript)
39
Readings for next week
  • Text chapters 28, 29, 30, 31
  • Millar (2007) paper
Write a Comment
User Comments (0)
About PowerShow.com