SpecOne ExCELL Enclosures Stainless Steel and Painted Steel

1
SpecOne Ex-CELL EnclosuresStainless Steel and
Painted Steel

• November, 2008

2
Ex-CELL Enclosures

• Manufactured to meet the most demanding
  industrial and hazardous area environmental
  applications
• Available in a comprehensive range of sizes, each
  with various configurations
• Globally certified enclosure and termination
  solution for Type 3S, 4X, and Zone 1 applications
• Certified to the impact, thermal, and IP66
  ingress requirements of EN 60079-0

3
Certifications and Compliances

• Class I, Division 2, Groups A, B, C, D
• cULUS to UL50 / C22.2 No. 94-M91, Types 3S, 4X
• ATEX II 2 GD EEx e II T6 IP66 (PTB02ATEX1014) for
  Zones 1, 2, and 21
• IEC-Ex Certified (IECEX BKI 08.0001U)
• GOST-R and KOSHA Certified
• KGS Pending
• When terminal blocks or approved Class I,
  Division 2 devices are installed within the
  enclosure. These enclosures are NOT
  explosionproof and will NOT contain an explosion.
  Installation of arcing and sparking devices
  which are not Class I, Division 2 rated or higher
  is NOT PERMITTED.

4
Standard Materials and Finishes

• Enclosure Options
• 316L (1.4404 to EN 10088) Stainless Steel
• 304 (1.4301 to EN 10088) Stainless Steel
• RAL 7032 Painted Steel
• Finish
• Superior corrosion-resistant chromium enriched
  electro-polished surface
• Gasket
• High-integrity one piece foam-in place
  polyurethane
• Available on stainless steel enclosures only.

5
Standard Materials and Finishes

• Keyed Lock Fastening Mechanism
• Chromium-plated zinc metal die cast
• Door Hardware
• Stainless steel hinges on door
• Enclosure Mounting
• 4 x external 3mm stainless steel welded lugs,
  11mm Ø holes/slots
• Equipment Mounting
• 4 x stand-off pillars 9mm Ø, 25mm high, tapped M6
  x 10, for rail/mounting plate

6
Standard Materials and Finishes

• Enclosure Earth
• M10 external and internal brass earth stud
  assembly
• Operating Temperature
• -20ºC to 60ºC
• Impact Resistance
• 7 J (Nm)

7
Dimensions Vertical Mounting
8
Dimensions Horizontal Mounting
9
Features

• The enclosure is mounted using four heavy-duty,
  3mm thick, surface welded stainless steel lugs
• Bottom lugs are slotted for ease of mounting
• Provides a secure, reliable means of mounting the
  enclosure

10
Features

• Available with up to 4 gland plates (3mm thick)
  on each side
• All sealed to IP66 rating by a high-integrity
  Chloroprene gasket and secured by rapid fixing
  Hytork fixing bolts

11
Features

• High-integrity one piece sealing gasket
  provides an IP66 rating and excellent recovery
  and re-sealing properties for continuous
  environmental protection

12
Features

• The standard cover features a ¼ turn keyed lock
  fastening mechanism that provides a rapid means
  of achieving an IP66 rated seal for reliable
  environmental protection
• Bolted cover and padlockable cover also available

13
Features

• An integral drainage channel prevents liquids or
  other solid contaminants from running in or
  falling into the enclosure when the door is
  opened, and minimizes gasket path contamination

14
Features

• External and internal brass earth/ground stud
  assembly enables rapid and reliable protective
  earth/ground connection
• Mounted on the side of the enclosure for ease of
  access

15
How to Build A Catalog Number
16
Options for Ex-CELL Enclosures

• Padlockable Hasp (field-installable)
• Provides a secondary means of security and safety
• Hasp is manufactured from same material grade as
  enclosure
• Drawing Pockets (consult factory)
• Holders for engineering CAD drawings can be
  installed at the factory
• Typical offering one per single door enclosure
  and two per double door enclosure

17
Options

• Rain/Deluge Canopy (consult factory)
• Can be retrofitted to the enclosure as required
  using existing fixing positions
• ID Tag Label and Bracket (consult factory)
• Provides an effective solution for labeling
  enclosure assemblies with ID Tag Labels
• Window Kit (consult factory)
• Available in multiple sizes for
  PLC/monitors/metering, as well as other
  applications

18
Locking Cover Hardware
19
Ordering Information Locking Cover Hardware
20
Ordering Information Ground Stud Kits
21
Ordering Information Stand-off Pillars
22
Ex-CELL Eagle Enclosures

• Ideal for highway, DOT, transportation,
  pharmaceutical, and telecommunications
  applications
• 0 or 1 gland plate options only

23
Ex-CELL Flush Mount Enclosures

• Water shedding design for vertical mounted
  applications protects critical electronics and
  instrumentation
• Ideal for vertical mounting (wall) in a
  pharmaceutical or clean room application or
  horizontal mounting (ceiling) in a plenum
  application
• 0 gland plate option only

24
Ex-CELL XXL Double Door Enclosures

• Protects extra large electronics and
  instrumentation such as PLCs, large displays and
  meters, air conditioners, fans, etc.
• Floor mounted enclosures available with a number
  of options, including a lifting eye kit (Catalog
  Number XXLS1IB KIT)
• Ideal for food and dairy, waste water treatment
  plants, and harsh environment wash down/hose down
  applications
• 0 or 1 gland plate options only

25
Ex-CELL Gang-able Enclosures

• Maintains NEMA 4/4X and IP66 ratings, as well as
  the certifications and compliances of the
  standard Ex-CELL enclosure
• Allows versatility for protecting larger
  electronics and instrumentation such as drives,
  custom control panels, extra large terminal
  blocks, etc.
• Available up to 48 x 96 x 12 (consult factory)