Virtual Instruments CleveLab System

1
1) BME UG LAB Virtual Instruments Sensors
Biomechanics Lab
Virtual Instruments CleveLab System A
laboratory course system that integrates
innovative bioinstrumentation hardware and
transducers with hands-on learning through
interactive software that educates students on
instrumentation, electro-physiology and clinical
applications. Lab sessions are designed for
biomedical engineering, the health sciences, and
pre-engineering. Labs Bio-potential, ECG, EEG,
EMG, EOG, respiration rate, oral/nasal
thermocouple, blood pressure, poly-somnography,
pressure based airflow, spirometry, pulse
oximetry, speech recognition, biomechanics,
accelerometry, data acquisition, statistical
analysis, digital signaling processing, image
processing, wireless medical telemetry,
breadboard circuit design, etc.
Human Arm Model with Angle Sensor Simulates the
muscles and motion of an actual human arm. Uses
force and angle sensors. The Arm can perform many
types of motion such as extending and lifting an
object, curling, or throwing a ball overhand.
Different arm muscles are activated depending on
which pulleys are selected. Static force
measurements can also be made to see how the
muscle tension changes at various arm positions.
BME 001
BME 002
Force Sensor Measures forces in the direction of
the sensor - side forces are minimized.
BME 003
2
1) BME UG LAB Virtual Instruments Sensors
Biomechanics Lab
Interface - Pasport Xplorer GLX Portable graphing
datalogger, for real-time data collection and
analysis in the classroom or in the field. It
captures, analyzes, annotates, stores and prints
data quickly and seamlessly, without being
connected to a computer. Computer contains
PASCO's award-winning DataStudio software.
Goniometer (probe velero straps) Can be
connected to the knee, hip or elbow joints to
measure angle changes during a variety of
movements. Use with the Xplorer datalogger or
Xplorer GLX for a easy-to-use human motion lab.
BME 004
BME 005
Carbon Dioxide (CO2) Gas Sensor Measures a wide
variety of CO2 concentrations, from the
germination of peas (10K ppm) to the human breath
(50K ppm) to automotive exhaust (80K ppm), and
more. Broad dynamic range 0-300K ppm.
BME 006
3
1) BME UG LAB Virtual Instruments Sensors
Biomechanics Lab
Conductivity Sensor Measures ions in solution.
Uses platinum probes for greater range and
improved accuracy at high and low concentrations.
Conduct 0-100,000 µS/cm.
Dissolved Oxygen (O2) Sensor Measures O2 in
solution. Wider range (0 to 20 mg/L), Excellent
resolution (0.01 mg/L), temperature compensated.
BME 007
BME 008
Respiration Rate Sensor Excellent data before and
after exercise. Combining our Relative Pressure
Sensor with a Respiration Belt, this sensor
measures the change in pressure that occurs as
the chest cavity expands and contracts during
breathing.
BME 009
4
1) BME UG LAB Virtual Instruments Sensors
Biomechanics Lab
Spirometer Measure airflow, pressure, duration,
and lung volume. The mouthpiece and sensor are
designed for safely and accurately measuring both
airflow out (expiration) and airflow in
(inspiration).
EKG sensor Students can see the electrical
signals generated by their hearts (EKG). After
students conduct mild exercise, watch the change
in data occur.
BME 010
BME 011
Hooked Mass Set Set for human arm model,
calibration kit for balances, etc. Range 10, 20,
50, 100, 200, 500, 1000 g.
BME 012
5
1) BME UG LAB Cell Culture Facility
Biosafety Cabinet Type AII (Laminar Flow Hoods)
with stand These glacier white biosafety cabinets
feature a unique interior-mounted, line-of-sight
LCD information center that displays icons for
at-a-glance monitoring of activities including
filter loading, disruption in airflow, and
cabinet components in use. A bar graph displays
percentage of remaining HEPA filter life. Cabinet
Bio UV 8 sash opening, 6 nominal width.
CO2 stacked incubators in vitro environment
clean, reliable and easy to use, protecting your
valuable samples while optimizing cell growth.
Air-Jacket temperature control, 3 - 55C, IR
sensor (CO2), Zirconium sensor (O2), 150L (5.3 cu
ft) and 100 pure antimicrobial copper.
BME 013
BME 014
Inverted Microscope with Digital Camera and PC
For live cell applications in advanced
laboratories, this microscope with phase contrast
and brightfield technology meets diagnostic,
research, and educational needs. Highly versatile
due to its unique swing-out condenser and long
working distance, it accommodates roller bottles,
tissue culture flasks, 96-well plates,
hemacytometers, petri dishes, and other vessels.
Includes six LWD objectives three brightfield
planachromatic (10x, 25x, and 40x magnification)
and three phase contrast planachromatic (10x,
25x, and 40x magnification).
BME 015
6
1) BME UG LAB Cell Culture Facility
Hemacytometer For cell counting.
BME 016
Cell counter For cell counting.
BME 017
Water bath digital unstirred Keep solutions at a
set temperature (medias for cell culture,
reactions, etc). Digital unstirred. Temperature
Troom 99 C.
BME 018
7
1) BME UG LAB Cell Culture Facility
Orbital Shaker Solutions mixing, cells staining
and treatment. Speed 25-500 rpm.
BME 019
Size Exclusion Chromatography (SEC) Column
Calibration kit LMW The column is a pre-packed
glass column for high performance gel filtration
of proteins, peptides, DNA fragments (lt200 bp)
and other biomolecules. Gel filtration column for
rapid protein homogeneity analysis or purity
check. Saves time in screening when many samples
are analyzed. Excellent choice when time and
buffer consumption is more important than the
highest possible resolution. Ideal choice when
sample volume is limited. Exclusion limit 1x105,
range 3,000-700,000 Da, flow 0.5-1.0 mL/min (Max
1.5 mL/min, Max 1.8 MPa).
BME 020
Centrifuge (microplates tubes), Refrigerated
with Swing-bucket and Fixed-angle Rotors -
Swing-bucket Rotor A-2-MTP Perfect for spinning
down plates after reaction set-up, e.g., before
PCR/qPCR amplification or ELISA assays. Max.
speed up to 2,204 x g. - Aerosol-tight
Fixed-angle Rotor FA-45-24-11-HS Perfect for
high-speed protocols up to 30,130 x g.
Accommodates 24 x 1.5/2.0 ml Eppendorf
tubes. Temperature Range -11 40C.
BME 021
8
1) BME UG LAB Cell Culture Facility
Centrifuge, Refrigerated with Swing-bucket Rotor
- Swing-bucket Rotor A-4-38 Maximum rcf 3,000
x g. Speed 100 rpm to max. 4,400 rpm (increments
of 100 rpm ). Temperature range 9C to 40C.
BME 022
Refrigerator For storage. Temperature 4C.
BME 023
Freezer For storage. Temperature -20C.
BME 024
9
1) BME UG LAB Cell Culture Facility
Analytical Balance Range 51 g - 8.1
Kg. Readability 0.0001 1 g.
BME 025
Hot Plate with Stirring Heat and stir.
Temperatures 5-500C. Speed 60-1600 rpm.
BME 026
Vortex Mixer For mixing solutions. Speed
500-3000 rpm.
BME 027
10
1) BME UG LAB Cell Culture Facility
Conductivity Meter with Stand Conductivity
0-3000 mS/cm, 0.0001-100 M?.
pH Meter pH range 0.00-14.00.
BME 028
BME 029
Pipet-Aid For pipeting under a laminar flow hood.
BME 030
11
1) BME UG LAB Cell Culture Facility
Micropipettors with Stand Volume range 0.5-10,
2-20, 20-200, 100-1000 ?L.
BME 031
Multichannel Micropipettors with Stand Volume
range 5-50 ?L, 50-300 ?L.
BME 032
Repeater Plus Pipettor Pipeting volumes
repeatedly. Cell staining, cell treatment,
standards, etc. Volume range 1 ?L 20 mL.
BME 033
12
1) BME UG LAB Cell Culture Facility
Analytical Automated Ultra MicroBalance with
Marble Slab and Enclosure Max. Capacity 5100
mg. Readability 1.0 µg. Stabilization 10-20
s. Pan size 1.6 cm (5/8 in).
BME 034
Cryobiological Storage System with level
monitor Durable construction and advanced vacuum
insulation to minimize liquid nitrogen (LN2)
evaporation for economical operation. Temperature
uniformity assures that samples are stored at
180C (292F) even when the vessel contains
less than 5cm (2") of LN2. Racks accommodate
13.3x13.3 cm (51/4x51/4") boxes. Alarm sounds
when level approaches 2.5 cm (1").
BME 035
Low Temperature Chest Freezer Providing reliable
performance, temperature stability, and long-term
storage protection. Ideal for industrial and
biomedical storage applications. Temperature
-86 C. Low-profile design that provides easy
access to inventory. Spring-loaded hinges
counterbalance the lid and ensure proper
alignment, smooth closure, and a tight seal
against the flexible gasket. Polystyrene
sub-lids reduce cold air loss.
BME 036
13
1) BME UG LAB Cell Culture Facility
CO2 Storage Box For storing dry ice without
electricity. Keeps 97.5kg (215lbs.) dry ice
supply up to 15 days.
BME 037
Autoclave - Sterilizer Sterilization of lab
supplies (plastic and glassware). Cell culture.
BME 038
Multi-Mode Microplate Reader Designed for the
life science research and drug discovery markets.
Detection modes Fluorescence Intensity,
Fluorescence Polarization, Time-Resolved
Fluorescence, AlphaScreen, Luminescence and
UV-visible Absorbance.
BME 039
14
1) BME UG LAB Cell Culture Facility
Water Ultra-Purification System The system
provides extremely high-quality water for life
sciences applications such as cell cultures,
PCR, and DNA sequencing by featuring
ultrapurification for the effective removal of
contaminants such as endotoxins and nucleases.
It is composed of Bio-Water and RO units.
BME 040
Ice Maker Ice is produced using a unique
freezer-flaker mechanism to provide clean, hard
bits of ice.
BME 041
15
2) BME Research LAB Real-time PCR Unit
Real-Time PCR Detection System The CFX96 optical
reaction module from Bio-Rad builds on the power
and flexibility of the C1000 thermal cycler,
creating an easy-to-install real-time PCR system
that delivers sensitive, reliable detection for
real-time PCR applications, including absolute
quantification, genetic variation analysis, and
gene expression. The flexible, easy-to-use CFX
Manager software accommodates the needs of all
users, whether performing a real-time PCR
experiment or analyzing a comprehensive gene
expression study.
BME 042
UV/Vis Spectrophotometer with Nanovette 50 ?L
Protein and nucleic acid concentration
determination. Fixed wavelength, wavelength
scan, kinetics/time, and single component
analysis (SCA) applications. It possesses
holders for regular 3 mL cuvettes, Nanovette used
for DNA/RNA and protein sub-?L analysis (0.5?L),
and also 50 ?L cuvettes.
BME 043
Double Cell Washer For cells/cuvettes washing and
drying using vacuum.
BME 044
16
2) BME Research LAB Thermal Analysis Unit
Nano Differential Scanning Calorimeter (DSC)
Specifically designed to characterize the
stability of a dilute sample as a function of
temperature. It can determine the thermal
stability and the heat capacity of proteins and
other macromolecules in dilute solution, with the
versatility and precision to perform molecular
stability screening, ligand binding and pressure
perturbation measurements.
BME 045
Nano Isothermal Titration Calorimeter (ITC)
Specifically for binding and kinetics studies on
purified dilute biological samples of limited
versatility and/or of limited availability and
purity.
BME 046
RSA III Immersion Fixture Used to obtain
high-performance DMA measurements for running
samples immersed in a liquid.
BME 047
17
2) BME Research LAB Electrophoresis Unit
Protein Electrophoresis System For 1-D vertical
gel electrophoresis. Easier to assemble,
leakproof, and with a four-gel capacity that
doubles the output of the Mini-PROTEAN family,
the Mini-PROTEAN Tetra cell combines traditional
Mini-PROTEAN features with higher throughput and
even greater reliability.
BME 048
Nucleic Acids Electrophoresis System For nucleic
acid separation. Agarose gels are easy to cast
and readily dissipate heat. These gels allow
sample underlaying and prevent electrical field
discontinuities caused by wicks or sample well
dehydration. Applications Northern and Southern
blotting, Cosmid library restriction analysis,
STS screening, Microsatellite analysis, PCR
fragment analysis, RFLP analysis, DNA
fingerprinting .
BME 049
Power Supply For submerged horizontal and mini
vertical gel electrophoresis (for instruments BME
007, 008, 011). The new design provides simple
programming in a compact, stackable case, and
also is the highest-quality power supply
available. The PowerPac Basic offers timer
control as well as constant voltage or constant
current output, with pause/resume run capability.
Replaces Power Pac 300.
BME 050
18
2) BME Research LAB Real-time PCR Unit
Semi-Dry Blotting System with Power Supply Fast,
efficient, and economical blotting. Using a
platinum-coated titanium plate as the anode and a
stainless-steel plate as the cathode, the
Trans-Blot SD cell transfers in a horizontal
configuration without a buffer tank or gel
cassettes. Transfers can be accomplished in 1530
minutes for mini gels and 3060 minutes for
full-size gels. Only 200 ml of buffer is needed
for a transfer, just enough to wet the filter
papers. The PowerPac HC with increased output of
250 V, 3.0 A, and 300 W, drives all high-current
applications. The PowerPac HC is the perfect
choice for western blotting with any of Bio-Rad's
extensive line of blotting cell
BME 051
Wet Blotting System A component of the Criterion
precast gel system, the Criterion blotter
combines blotting efficiency and flexibility in a
unit that is incredibly easy to use. Matches the
throughput of the Criterion cell, blotting two
Criterion gels or 4 mini format gels
(Mini-PROTEAN or Ready Gel size) in 3060
minutes. Close electrodes (4.3 cm apart) provide
maximum field strength for rapid and efficient
transfers.
BME 052
Molecular Imager The ChemiDoc XRS system is the
most advanced chemiluminescent detection system
in Bio-Rad's gel documentation line. It features
flat fielding technology for superior uniformity
and quantitation, and the flexibility to image
chemiluminescent, fluorescent, and colorimetric
samples. Applications Western blotting, nucleic
acid detection, 2-D gel electrophoresis, dot
blotting, densitometry, and colony counting.
Large portfolio of detection methods Immun-Star
HRP and AP chemiluminescent detection, ethidium
bromide, SYBR Green I, SYPRO Ruby, Cy3,
rhodamine, Green Fluorescent Protein, Hoechst,
silver stain, copper stain, and Coomassie
Brilliant Blue.
BME 053
19
2) BME Research LAB Real-time PCR Unit
Rocking Platform Cells/gels staining and
treatment. Solutions mixing.
BME 054
2) BME Research LAB Cell Characterization Unit
Impedance Analyzer System with CO2 Incubator The
ECIS Z? (theta) from Applied BioPhysics provides
researchers with an advanced, automated,
non-invasive means to monitor cell behavior in
real-time and without the use of labels. ECIS
measures the complex impedance of small
250-micrometer diameter electrodes used as
substrates for cell growth. As cells grow on the
electrode they constrict current flow altering
the impedance. The ECIS Z? reliably monitors up
to 16 or 96 tissue culture wells, interprets the
complex impedance as both resistance and
capacitance, and can report these values as well
as the simple impedance. Applications wound
healing assay, migration, attachment and
spreading, invasion, angiogenesis, barrier
function, cells under flow, toxicology,
proliferation, motility, cell growth,
electroporation, extravasation, chemotaxis, ECM
interaction, and hypoxia.
BME 055