REMAX Design Center

1
RE/MAX Design Center

• Creating a Print Project

2
In the Design Gallery, choose a design and click
the Select link under the thumbnail.
3
Give your project a name and select a folder for
the project to be stored in
Click Save
4

Confirm your contact information.
This is the information that will appear on your
project.
To change your name, office or email address you
must first change it in the profile screen,
before you start the project.
Click Next
5
Confirm your photo.
To change your photo click the Upload image button
When Ready, click Next
6
Start entering Information
If unsure of where each item belongs on design,
click View Layout button to left
7
This will bring up a layout preview showing where
each item belongs on the design
The View Layout button appears on the side of
every screen while creating your project
Close or minimize the Layout Preview to continue
working
8
Enter desired information
Click next
9
To add Pictures you can Upload an image directly
from your computer for this particular page
or you can upload all photos for this project
at once using the Image Assistant
10
Clicking the Image Assistant button will bring
you to the Image Assistant window
The left-hand panel shows the upload button and
the folder list while the right-hand panel shows
any pictures previously uploaded for projects in
the selected subject folder
Click the Upload button to start bringing
pictures into the Image Assistant
11
This will bring you to a 3-step process for
uploading images
Step 1 Click the Browse button to select an
image to be uploaded
12
Select the image you want to use, from your
computer
Click Open
13
Step 2 Click Add
14
t
Before continuing to Step 3, repeat steps one
and two to add more photos
Notice the image is now added to the Image Queue
to be uploaded
15
Step 3 Once all the desired images have been
placed in the queue for uploading press the
upload Button
16
A small window indicating your upload is complete
will appear asking you what to do next, click
View Library
17
This takes you back to the image thumbnails
If more than 6 pictures uploaded, switch between
pages of pictures using the page s at the top
Now select the picture you would like to use for
the current page
18
In the Image Cropper screen, use the black corner
pull-handles to focus the image
When satisfied with cropping, click Crop
19
If satisfied with the image when asked if this is
correct then click the Save button
20
Your cropped image should now display in the
Photo Area
Add content
Click Next
21
Click the image assistant button to find and crop
an image for the next page
Add content as normal
You may need to scroll down to access all content
fields
22
Once all desired content is added click Next
23
Repeat process of previous screen by accessing
the image assistant for a picture and adding
relevant content
Scroll Down for all fields
24
You dont need to use all fields if you dont
have enough wording, Design Center will
automatically format content to fit
When happy with content click Next
25
Again, use same image selection process in the
Image Assistant and add content as required
Scroll down for more content fields
26
When working on a design you never have to click
a save button. Each time you press Next the
content youve added gets saved into the project
When the last content page is complete click the
Finish button to complete the project
Finish
27
This will take you to the Project Overview Screen
Congratulations! You have completed a print
project.