Vahkoros Sprite Using Tutorial

1
Vahkoros Sprite Using Tutorial

• Version 1.0

2
Step 1 Choosing the Kit

• Begin by choosing a kit that you would like to
  use to make comics, avatars, etc
• For example Lets use Vahkoros Star Wars RZ
  Kit.
• Be aware You must give credit to the person(s)
  who made the kit. In this case, to Rahi Zaku and
  Vahkoro.

3
(No Transcript)
4
Step 2 Saving the Kit

• Open the link in the topic and make sure the kit
  is the one that you want.
• Make a folder on your desktop called Comics or
  Avatars.
• Save the kit into the folder you just made. Save
  it as Star Wars RZ Kit.

5
(No Transcript)
6
Step 3 Using Paint

• Open up Paint.
• Note This tutorial is for Windows users. Macs
  are Greek to me.
• Go to FilegtOpengtComicsgtStar Wars RZ Kit.
• The first thing to do Go to Image.
• Uncheck Draw Opaque.

7
(No Transcript)
8
Step 4 The Kit

• This is where you make the characters into one
  piece. Use the magnifying glass and zoom in on
  the character you would want to use.
• Using the Select tool (Box), drag the cursor over
  the desired piece of the character you would like
  to use.

9
(No Transcript)
10
Step 4 Continued

• While the piece you want is selected, press Ctrl
  C on your keyboard.
• Or you can go to EDITgtCopy.
• Press Ctrl V. The piece you copied should appear
  on the upper left hand corner of the magnified
  area unless you scrolled away from it.
• Repeat step 4 until all of your pieces are copied
  and pasted.
• Your final result may look like this

11
(No Transcript)
12
Step 4.5 Putting it all together

• With all of the pieces you have separated, you
  should have a little room around the perimeter of
  the entire character. Now pay attention. You
  might get lost.
• The next few slides are the steps to put together
  an average clone. Sounds easy?

13
(No Transcript)
14
(No Transcript)
15
(No Transcript)
16
(No Transcript)
17
(No Transcript)
18
(No Transcript)
19
(No Transcript)
20
(No Transcript)
21
(No Transcript)
22
(No Transcript)
23
(No Transcript)
24
(No Transcript)
25
(No Transcript)
26
(No Transcript)
27
(No Transcript)
28
(No Transcript)
29
Congratulations!

• You have made your first Character!
• Your end result should look like this

30
Finally

• Now, you can do that for all of the poses in your
  comic, avatar, or just pieces of art!
• Use this tutorial wisely and make sure to follow
  the instructions carefully. ?