Install Code Composer Studio CCS on your PC'

1
Install Code Composer Studio (CCS) on your PC.

• Install CCS2 v2.0 using installation CD from TI.
  Standard selections are fine. Do not register the
  installation.
• Restart.
• Upgrade to v2.1 using upgrade CD from TI.
• Upgrade using file c6000-2.10.00-Full-to-c6000-2.1
  0.10-Full.exe
• Upgrade using c6000-2.10-00-Full-to-c6000-2.12.01-
  Full.exe.
• Restart.
• Upgrade using c6000-2.10.00-Full-to-c6000-2.20.00-
  Full.
• Restart
• If you get the error message One or more
  resources is invalid. Check that device drivers
  actually exist. You may have to remove bad
  resources to exit setup just press OK seems to
  work fine.
• Start Setup CCS 2. Import 67xx cycle accurate
  sim, little endian.

2
How to learn DSP

• See how to quickly learn DSP programming on
  www.s3.kth.se/signal/edu/projekt/DSPsupport/gettin
  g_started.shtml. Follow step 1 to 4.
• Code optimization will be dealt with later in the
  course.
• Assignment Write at least two functions before
  third meeting 9/12.