Objective

1
Objective
At the completion of this lesson you (the
student) will be able to demonstrate the sills
and knowledge required to properly guide a
wheeled vehicle into a designated area by using
ground guide visual signals without injury to
personnel, damage to equipment or the surrounding
area.

88M11A08/1
2
Hand and Arm Signal Communications
Safety

• Make a 360 degree walk around check.
• Use 3-points of contact.
• Keep 10 yards distance between themselves and
  vehicle.
• Keep ground guide in sight, if you loose site
  of ground guide, stop immediately.
• Wear hearing protection.
• At no time ground guide will walk or run backward
  while ground guiding vehicles.

88M11A08/2
3
Hand and Arm Signal Communications
Start Engines
Day
Night
88M11A08/3
4
Hand and Arm Signals
Come Ahead
Move in Reverse
Night
Daytime
88M11A08/4
5
Left and Right turn
88M11A08/5
6
Mount
Dismount
Night
Day
88M11A08/6
7
Extend
Day
Night
88M11A08/7
8
Close-up
Day
Night
88M11A08/8
9
Slow down
Stop or Halt
Day
Night
88M11A08/9
10
Turn off Engine
Assemble
Night
Day
88M11A08/10
11

• Safety Briefing
• 360 degree walk around
• 3 points of contact
• Keep 10 yards from vehicle
• Wear hearing protection
• Stop vehicle movement if visual contact
• with ground guide is lost

• Hand and Arm Signals
• Start engines
• Come ahead
• Move in reverse
• Left and right turn
• Mount and dismount
• Extend and close-up
• Slow down
• Stop or halt
• Turn off engine
• Assemble

88M11A08/11