VDMA Musterprsentation

1
1288 Standard - Basic Information
Dr. Emil Ott, PCO AG
2
Overview
?
3
Vendor, Model

• vendor
• warranty, address, website etc.
• model
• identification, selection, comparison

4
Type of Data
5
Sensor Type

• sensor type
• CCD
• CMOS
• CID
• Hybrid
• other

6
Sensor Diagonal Lens Category
graphics from Optical Microscopy Primer
7
Resolution Pixel Size
8
Readout Type Transfer Type (CCD only)

• readout type
• progressive scan
• interlaced scan

• transfer type
• interline transfer
• frame transfer
• full frame
• frame interline transfer

9
Shutter Type (CMOS only)

• shutter type
• rolling shutter
• global shutter
• non shutter
• other

10
Overlap Capabilities

• overlap capabilities
• overlapping readout of frame n and exposure of
  frame n1 can happen at the same time
• non-overlapping readout of frame n and exposure
  of frame n1 can only happen sequentially
• others defined in the data-sheet

11
Frame Rate
_at_full frame
Maximum frame rate at the given operation point
(no change of settings permitted).
12
General Conventions

• general conventions
• conditions, which are all the same for all or
  many measurements (e.g. wavelength, which has
  been used for measurements)
• conventions, which are all the same for all or
  many measurements (to be specified)

13
Definition used for Typical Data
number of samples, sample selection, tolerances,
etc...
14
Other...
interface types, camRAM, etc...
15
Conclusion...

• The basic information data are a minimum
  requirement to compare image sensors and camera
  systems. They should enable a pre-selection for
  products, which are subsequently compared in more
  detail.
• The more detailed comparison with 1288 data is
  explained in the next presentation...

Thank you for your attention!