TC 67 TC 184SC4 Cooperations

1
TC 67 TC 184/SC4 Co-operations

• Report prepared
• by
• Nils Sandsmark

2
ISO 15926 - Integration of lifecycle data for
process plants including oil and gas production
facilities

• ISO 15926 consists of seven parts
• Part 1 Overview and fundamental principles (IS
  published June 2004)
• Part 2 Data model (IS published December 2003)
• Part 3 Ontology for geometry and topology (CD/TS
  ballot issues resolution in progress)
• Part 4 Initial reference data (CD/TS ballot
  issues resolution in progress)
• Part 5 Procedures for registration and
  maintenance of reference data (Input to ISO
  Maintenance Agency proposal)
• Part 6 Scope and methodology for developing
  additional reference data (CD/TS proposal under
  preparation in progress)
• Part 7 Implementation methods for the
  integration of distributed systems (CD/TS ballot
  issues resolution in progress)

3
Slide courtesy of FMC Kongsberg Subsea
4
(No Transcript)
5
Initiation of Co-operation (1)

• Co-operation was discussed in a meeting between
  David Miller, ISO TC67 and Nils Sandsmark, ISO TC
  184/S4 on 10 October 2005
• The objective of the co-operation is to establish
  an Oil Gas terminology and ontology
• Proposed to start pilots on
• Drilling and production equipment
• Reliability Engineering

6
Initiation of Co-operation (2)

• A meeting 2 February 2006 initiated the work on
  sub-sea production system equipment
• Terminology from ISO 13628 Part 1-9 (ISO TC67/SC4
  Work Group 6 Olav Inderberg) to be sent to ISO TC
  184/SC4 Team 25 (Nils Sandsmark) for
  incorporation in ISO 15926
• ISO TC67/SC4 Work Group 6 to investigate the use
  of terms, definitions and object models
  (ontologies) from ISO 15926 in ISO 13628
• Work on reliability engineering need further
  planning
• This plan was discussed by TC67 Management
  Committee in a meeting 10 February 2006. No clear
  conclusions from the meeting

7
Aligning ISO 13628 (API 17) ISO15926

• Approx. 400 defined terms in 13628 Parts 1-9
• First step, to resolve inconsistencies
  highlighted in TC67 report N172
• About 200 terms
• Ongoing work now is to check and align with RDL.
  This should result in a proposal with recommended
  common terms and definitions.
• Completed by 1 May 2006
• Remaining work
• To go through Parts 1-9 - about 300 terms
• Check and revise existing RDL classes
• Propose definitions for TC67
• Draft ready by autumn 2006

8
Problems to be Resolved

• Create understanding of ISO 15926 structure
• Solve ISO 13628 context dependent problems
• Example Bundle
• ISO 13628-5 Laid-up functional components and
  associated fillers in the umbilical prior to
  sheathing.
• ISO 15926-4 draft A grouping of parallel lines,
  wires or tubes reaching from the point of
  operation to the point of control
• Example Annulus
• ISO 13628-2 Space between the OD of the inner
  sealing element and the ID of the outer sealing
  element of a concentric piping configuration.
• ISO 15926-4 draft A feature that is the region
  between two concentric circles which have
  different radii.

9
Wellhead Christmas Tree
Christmas Tree
Production outlet
Flow Rate
Plug
Annulus circulation Valve
Gate Valve
Qualified
Production Master Valve
Pipe
Crossover flowloop
Annulus Master Valve
Tubing hanger
Well Production Tubing assembly
Tubing hanger seal
Pressure rated artefact
Well Tubing (String)
Wellhead housing
Well Casing (String)
Tubing annulus
Nominal Length
Casing B annulus
Nominal Size
Pressure class
10
Proposed Actions and Further Work

• ISO TC 184/SC4 endorsement of planned pilot
• Results of the pilot to be presented to ISO TC 67
  and ISO TC 184/SC4
• If the pilot is successful work on other TC 67
  standards should be initiated
• Experience from the ISO TC 67 - ISO TC 184/SC4
  collaboration could be used in other industries?