Morin Flexo Printing Technologies

1
Morin Flexo Printing Technologies

• Philip Morin
• 61 East Main Street
• Forestville, CT 06010
• Tel/Fax [phone]

2
Morin Flexo Printing Technologies
3
Meeting the Wants and Needs

• Printer is small, which allows the operator to
  see everything going on with the printer, making
  it easier for the operator to make adjustments.
• Self-cleaning mode helps the operator to keep
  print quality at the highest level possible. Our
  current capabilities are 2 size font. This
  unique feature is totally automatic but has a
  manual mode to switch to when time is a factor.
• No leaks because our doctor-blade setup is a
  hybrid of a chambered doctoring system and bottom
  trough doctoring system. We doctor the ink onto
  the anilox roll then doctor the excess off with
  the primary blade.
• The Print Drum is easy to remove (1 to 2 minutes)
  allowing for shorter maintenance periods.
• Small modular design,12 x 12 x 36, allows the
  printers to be stacked, giving the customer
  multi-color capabilities.

4
Table of Contents

• Objective
• Customer requirements
• Meeting the wants and needs
• Cost savings
• Print system
• Ink system
• Structural features
• Electrical features
• Technical specifications
• Our strengths
• Your benefits

5
Objective

• To supply the highest quality modular
  flexographic printer at a very competitive price
  and exceed our customers requirements. To this
  date, our beta unit has been running for 52
  months without down time. Call for references.

6
Customer Requirements

• The smallest modular printer 12 x 12 x 36
• Easy to adjust, work on and retrofit
• High quality printing
• New standards for high quality bar coding
• Can print 2 size font
• No leaks
• No clean up or contamination
• Ease of Maintenance
• Reduced downtime
• Multi-color capabilities
• Increased need

7
Cost Savings

• Initial purchase
• Customer satisfaction
• Less technical support required
• No ink spills
• Installation
• Less maintenance

8
Print System

• Stepper motor drive
• Repeatability up to .00137 inches _at_ 15 cycles per
  minute
• Encoder controlled print cycle
• A True synchronous printer
• Eliminating top stock stretch
• Eliminating hot peel lift off
• 500 lines/inch ceramic anilox roller

9
Ink System

• Doctor blade
• Quick disconnect ink trough for easy removal
  under 10 seconds
• Intelligent ink management
• Auto fill _at_ start-up
• Auto clean _at_ 30 minutes idle or manually
• Auto shut-down _at_ completion of clean cycle

10
Standard Structural Features

• Solid aluminum construction
• All frame components pinned
• 80/20 cross members serve as wire ways
• Solid frame end to end
• Sealed bearings on all rotating components
• Eliminates bearing contamination
• Prevents premature failure

11
Standard Electrical Features

• PLC driven
• Compatible with any host machine
• Programmed brake/clutch when required
• Reduced component wear
• Independent safety circuit
• Compatible w/ European machinery

12
Technical Specifications

• Millennium Series
• Foot Print 12w x 12h x 36d
•  
• Drum Diameter 8.75 with .125print plate
•  
• Print Length 610mm (24)
•  
• Print Width 406mm (16.00)
•  
• Print Speed lt 45 cpm
•  
• Weight 130 LBS. .

13
Strengths

• Over 30 years experience in building machinery
  automation, flexographic printers, and packaging
  machines while focusing on the customers
  specific wants and needs while meeting their high
  quality standards.

14
Benefits of Morin Flexo Technologies

• The Morin flexographic printer is the smallest
  and most durable in the industry. Its modular
  design allows for stacking the printers for
  multi-color printing up to four colors. This
  unit insures repeatability to within three
  encoder pulses (1 Pulse is equal to .00137
  inches) at fifteen cycles per minute. This
  encoder will follow the index cycle of any form,
  fill, and seal machine. The Morin Intelligent
  Ink Management System comes standard with the
  printer and includes the automated cleaning
  cycle. Our patented single valve for ink and
  cleaners, eliminates leaking from back up of
  semi-dried ink. This no ink flooding system also
  holds the ink trough and doctor blade
  horizontally under anilox roll, stopping any ink
  loss. The anilox roll is ceramic-coated and
  laser engraved for extended wear.