Overview%20of%20the%20Frascati%20Production%20Facilities

1
Overview of the Frascati Production Facilities

• Chamber assembly
• Developed and implemented in Frascati since many
  years (BML98, BML96)
• Now finalized to the final decisions made on the
  chamber
• Wiring Machine
• At the end of 98 started a program of design and
  development of a fully automated machine.

2

• Wire tension measurement
• A system, based on electrostatic method, capable
  of measuring up to 16 tubes at a time has been
  developed and built.
• Gas leak and HV test station
• A system capable of measuring 64 tubes has been
  developed and built
• Wire-tube position measurement
• The EMMI, developed and built by Rome and
  Pavia, has been adopted

3

• Clean Room
• The above listed facilities are housed in
  separate areas inside a single large clean room.
• Hall Space
• A large hall in which the clean room is located
  is available
• Storage
• Storage (and transport) structures have been
  designed and 2 prototypes have been built

4

• Cosmic Ray Test Station
• It is under construction
• Chamber gas leak test stand
• It has to be designed and realized
• Data Base
• The Data Base system is being implemented

5
Module 0

• Module 0 is being built
• 2 layers - one on each side glued
• praxial alignment platforms glued
• Produced gt 200 tubes
• The construction is going on with continuity.
  Interventions for the optimization of the
  performances are postponed

6
Module 0

• After full experience with module 0 ?effort for
  the optimization before moving to full speed
  production