Twin Spine Installation

1
Twin Spine Installation

2
Twin Spine Installation

• Installation of a Twin Spine is very simple and
  easy. Before you begin, make sure you have a
  copy of the installation instructions, the
  necessary materials and the electrical conduit
  has been run to the sign location. If you have
  an 8 X 5, a 10 X 5 or a 12 X 6 you may need
  some type of mechanical lifting assistance to set
  the base.
• Make sure you have the proper permits.

3
Twin Spine Installation

• Dig a Hole

4
Twin Spine Installation

• Set base in hole. Use blocks to aid in leveling
  base.

5
Twin Spine Installation

• Pour ready mix concrete. Make sure base is level
  and conduit for electrical lines lines is
  installed

6
Twin Spine Installation

• Your sign will be delivered on a wooden skid.
  You will need some mechanical means of lifting
  your sign so as to place it on the base. Two
  legs extending from the bottom of the sign
  should slide into the two larger legs of the base.

7
Twin Spine Installation

• After sign legs have been inserted into the base
  legs, tighten the four bolts on the base legs and
  make electrical connections.

8
Twin Spine Installation

• Install cowlings and enjoy your new sign.