Best Soil Testing Lab in India

1
Best Soil Testing Lab in India
2
Introduction

• Geotechnical drilling is used to drill into rock
  to the necessary depth for appropriate laboratory
  testing, as well as to determine the SPT value
  and collect samples of both disturbed and
  undisturbed soil. It aids in determining the
  kind, state, and engineering characteristics of
  subsurface strata.
• Boring through the soil layers is done in
  compliance with IS 1892. In dirt, the borehole's
  diameter must be 100/150 mm. The borehole was
  progressed to the necessary depth using guide
  casing of sufficient diameter. Nonetheless, in
  accordance with IS 4464, drilling is done using a
  conventional (NX) size double/triple tube core
  barrel if bedrock is found.

3
Geotechnical Drilling Capabilities

• Our Geotechnical Drilling Capabilities Include
• Static Cone Penetration Test
• Vane Shear Test
• Permeability Test
• Plate Load Test

4

• Static Cone Penetration Test
• It is among the most well-liked and approved
  techniques for soil investigation in the world.
  In order to conduct continuous profiling up to a
  predetermined depth or refusal, whichever comes
  first, it is utilised to establish an in-situ
  geotechnical characterization of the ground and
  aids in assessing end bearing and skin friction
  of soil.
• 2. Vane Shear Test
• The Vane Shear Test is used to determine a soil's
  in-situ shear strength. Determining the shear
  strength of saturated clays is most appropriate,
  particularly for those with a consistency that
  ranges from "soft" to "firm," as well as delicate
  soils that are extremely susceptible to
  perturbations during sampling.

5

• 3. Permeability Test
• The capacity of soil or rock to let water move
  through it is known as permeability. For various
  engineering situations, such as calculating the
  pumping capacity for excavation/dewatering,
  designing the cut-off wall for an earth dam, and
  figuring out the aquifer constants of subsurface
  strata, permeability testing is carried out in
  accordance with IS 5529 Parts 1 and 2,
  respectively, for soil and rock.
• 4. Plate Load Test
• Plate Load Test is an on-site testing method used
  to determine soils ultimate bearing capacity and
  the likely settlement under a given load. It is
  also used to verify the compactness of ground
  filling by establishing subgrade modulus and
  elasticity value.

6
Connect with us!

• CEG Test House is your finest option if you're
  seeking for advice regarding the best soil
  testing lab in India. Contact us for more
  information!
• https//cegtesthouse.com/geotechnical-investigatio
  ns/geotechnical-tests/