Manager

1
Linksys Velop Setup without using the app

• linksys velop setup without app is still possible
  and relatively straightforward. Although the
  official app offers convenience, alternative
  methods exist to configure the Velop mesh system
  manually through a web interface. The web-based
  setup provides greater flexibility and is
  accessible from any device with a web browser.
• To initiate the manual setup, first, ensure that
  your Velop nodes are powered on and connected to
  each other correctly. You can use the provided
  Ethernet cables to establish the connections.
  Once the nodes have powered up, look for the
  Velop's default Wi-Fi network, typically labeled
  as "Linksys Velop Setup" or something similar.
  Connect your device (computer, smartphone, or
  tablet) to this Wi-Fi network.
• Next, open a web browser on your connected device
  and type in the default IP address of the Velop
  system, which is often "192.168.1.1" or
  "192.168.0.1." Press "Enter," and you should see
  the Velop web interface login page.
• At this point, you may need to enter the default
  login credentials, which are usually "admin" for
  both the username and password. If you've
  previously changed the login details, use those
  instead.

2

• Once logged in, the web interface will guide you
  through the setup process. You'll need to specify
  details like your desired network name (SSID),
  password, and internet connection type. If you
  have a PPPoE or static IP setup, make sure to
  have the required information from your ISP on
  hand.
• The Velop system will then prompt you to set up
  the primary node. Once the primary node is
  configured, you can proceed to add additional
  nodes to expand your mesh network's coverage.
  During this process, the Velop system will ask
  you to place the secondary nodes strategically
  for optimal network performance.
• After adding all the nodes, the Velop system will
  perform some checks and optimizations to ensure
  seamless connectivity. Once completed, your Velop
  mesh network will be up and running.
• It's important to note that the exact steps and
  interface may vary slightly depending on the
  specific model and firmware version of your
  Linksys Velop. However, most models offer a
  web-based setup that follows a similar procedure.

3

• In conclusion, although the Linksys Velop app
  provides an intuitive and user-friendly way to
  set up the mesh system, the web-based setup
  allows for manual configuration without requiring
  the app. By following the steps provided above,
  you can easily establish a functional Velop mesh
  network to enjoy reliable Wi-Fi coverage
  throughout your home or office.