Floor sanding

1
Floor sanding
Make sure that the floor is flat and nail-free.
You must punch every nail of the floorboards in
the wood to remain under the surface. You cannot
have the nails protruding from the surface. Be
careful with the sander because it can catch on a
nail, rip the sandpaper, or damage the equipment.
Now sand around the room edges using the edging
sander and sand the floor with a drum sander. If
you have uneven floorboards, you can sand the
floorboards diagonally.
0402 042 718
floorsandinginsydney.com.au
2
Floor sanding Sydney
An experienced hand will ensure that the job was
done in an efficient manner and within the
stipulated deadline. Professional service
providers can complete the job in a record time
due to the sophisticated machinery deployed by
them. These electrically powered drum rollers are
capable of covering almost ninety percent of the
floor area. The remaining area needs to be worked
upon manually by rubbing the sandpapers on the
floor. It is worthwhile to mention here that
renovation of the floor is a tedious job and
requires a lot of hard work. The handheld rollers
are being wrapped with a suitable grade of
sandpaper which then manually rolled over the
floor. 
0402 042 718
floorsandinginsydney.com.au
3
Floor sanding Sydney
You need to ensure that you remove all the rotten
floorboards. Now, you need a drum sander and an
edging sander. If you contact the shop of floor
sanding in Sydney, you will get all the things
you need. They can also help you with detailed
information on using the machines. Other than
this, it is also wise to think about safety. You
will need some protective tools like high-quality
dust masks. It is also good to have ear
protection muffs or earplugs and a good and
sturdy pair of shoes. You might also need other
tools like a hammer, many sandpapers in various
grits, a nail punch, a vacuum cleaner, and lots
of garbage bags filled with sawdust.
floorsandinginsydney.com.au
0402 042 718