Common Metal Roofing Problems and Fixes

1
Common Metal Roofing Problems and Fixes
https//brssupply.us/our-products/metal-roofing
2
No matter how much money a product costs or how
well its cared for, problems can still occur.
And metal roofs are no different. While long-term
problems tend to happen less frequently than with
asphalt shingles or concrete tiles, there are
some common issues that could arise with your
metal roof. In this article, the best metal
roofing supplier in Atlanta, GA, will discuss
some common metal roofing problems and how they
can be fixed!
Oil Canning
Oil canning is one of the most hotly debated
topics in metal roofing. This phenomenon can be
difficult to define, but there are a number of
reasons that it may occur Overproduction
Pressure during the coiling process can lead to
overproduction of the metal. Coil slitting and
roll forming panels can cause frequent stress.
Insufficient space between the panels allows them
to expand and contract, which can damage them.
3
Fortunately, there are steps you can take to
reduce the likelihood of oil canning, including
Investing in a thicker metal
Rib rollers can help to soften the look of a
panel by breaking up the flat space. Choosing
a low-gloss or matte finish can help reduce the
visibility of oil canning.
Leaking
We hate to tell you this, but a leaky roof is no
fun. In addition to the expense of getting it
fixed, theres also the headache of worrying
about other items in your home or building being
damaged by water. Metal roofs are subject to
leaks (and some can be due to human error). A
leaking roof could be caused by one or more of
these common uncontrollable events
4
Structural damage Wind Heavy rain Ice
damming Heavy snow Other weather phenomenon
Scuffing Scratching
Metal roofing can get scratched at any point in
its life, but most manufacturers take care to
ensure that the metal is free from scratches
before it leaves the factory. However, it is
possible for roll formers and installers to
mishandle coils and panels during the rollforming
and installation process. This could happen
when If the metal is not properly coiled or
recoiled, it could rub together and cause the
coating to wear off. Carriers do not use
proper lifting equipment when handling the
coil Edge guards are not used to protect the
edges of sheets when they ship.
5
If you notice a scratch or scuff in your metal
panels, get in touch with your Metal Roof Supply
Company in Atlanta, GA immediately. They will
likely be able to fix the problem with a paint or
touch-up pen designed to match the color of the
roof. If its a deep gouge that goes down to the
core of the metal, though, that piece should be
replaced immediately. Feel free to call us at
470-999-9997 or visit our website
https//brssupply.us/
6
BRS Roofing Supply 2830 Simpson CircleNorcross,
Georgia, USAPhone 470-999-9997Email
info_at_brssupply.ushttps//brssupply.us/https//ww
w.facebook.com/brssupplyushttps//www.instagram.c
om/brsroofingsupply/https//www.youtube.com/chann
el/UCT-DcFp3gBpSzkZMlsSlEmQ