Industrial Gaskets Manufacturers | Asbestos and Non-Asbestos Gasket Manufacturers (1)

1
The Indian Gasket Market and its Development

• PGE Industries

2
Introduction

• A gasket is any seal or grommet that connects two
  things. Rubber, plastic, metal, and other
  materials can be used to make gaskets. The
  material you choose is decided by the reason you
  need a gasket. Gaskets, on the other hand, are
  more than just a watertight seal, as you'll see.
  When shopping for a gasket, keep these ten
  factors in mind. PGE Industries Pvt. Ltd. is a
  maker of Sealing and Insulating Products, as well
  as Industrial Gaskets Manufacturer.

3
The United Nations' Sustainable Development Goals
(SDGs) aim to make the world a better place in
the future. This, however, is in direct
contradiction with the rising energy needs of
developing countries such as India. The current
demand for power is already pushing our country's
power producing capacity to its maximum. Several
new initiatives focusing on green energy and
alternative power sources have been announced,
all of which will contribute to the expansion of
the Indian sealing sector. Hon PM's nationalistic
initiatives such as Aatma-Nirbhar Bharat and Make
in India have helped India become a powerhouse
for hi-tech manufacturing with cutting-edge
technical equipment, with several foreign
conglomerates establishing production units in
India. Our country's young population and rising
purchasing power are boosting market expansion.
Furthermore, the Government of India is pushing
steps to foster a healthy environment for
strengthening the country's manufacturing sector,
hence boosting the industrial sealing market in
India.
4
What exactly is a Gasket?

• To avoid leaks, a gasket is a
  deformable material clamped between two sealing
  surfaces.
• The following are the top ten functions of a
  gasket
• 1. The gasket should provide the initial seal.
• 2. The gasket must keep the seal in place for an
  extended period of time.
• 3. The gasket must remain intact throughout
  handling and installation.
• 4. To make an initial seal, the gasket must be
  flexible enough to flow into defects in the
  seating surface.
• 5. The gasket must be strong enough to withstand
  crushing under applied weight and blowout under
  system pressure
• 6. The gasket must be chemically resistant to the
  system fluid as well as the greatest system
  temperatures.

5
7. The gasket must be strong enough to keep its
seal, tough enough to withstand creep
relaxation, and resilient enough to recover
during typical operation, which includes heat
cycling, vibration, and pipe hammering. 8. The
gasket must never corrode the sitting surface. 9.
The gasket must be resistant to the fluid being
sealed. 10. The gasket should be simple to remove.
6
Gaskets and Their Market Segmentation

• The industry is organized into
  three segments based on material type
• Metallic
• Semi-Metallic
• Non-Metallic
• The industry is divided into the following
  product categories
• Soft
• Corrugated
• Spiral Wound
• Ring Joint
• Kamm profile
• Others
• The Target industry can also be classified
  according to end-user
• Refineries
• Power Generation
• Chemical Processing
• Industrial Machinery
• Pulp and Paper
• Others

7
Factors Driving the Indian Gasket Market Growth -

• 1. Increased use of soft gaskets for greener
  energy production.
• 2. Rising demand from Middle Eastern oil and gas
  production facilities.
• 3. Strict leakage regulations enforced by
  environmental protection authorities
• This market will progressively recover throughout
  the projection period as a result of government
  initiatives targeted at revitalizing the
  economy.Chrysotile Asbestos Fiber (CAF) Gasketing
  material was once widely utilized in India. CAFs
  were discovered to be particularly bad in terms
  of fugitive emission, with a high leakage rate
  and poor overall performance. Non-asbestos
  alternatives include soft gasket material and
  semi-metallic gaskets such as Kamm profile
  gaskets. PGE has assisted numerous sectors in
  transitioning to greener and safer
  application-specific non-asbestos gasketing
  solutions that have assisted them in reducing
  fugitive emissions by over 400

8
Conclusion and Observation

• The expansion of the Energy category is primarily
  responsible for the growth of the Indian Gasket
  Market. The thriving automobile industry also
  contributes to the increased use of gaskets. In
  the projected period of 2022-2027, the Indian
  Gasket Market is expected to grow at a CAGR of
  6. Refineries, power generation, chemical
  processing, paper and pulp, and other major
  end-users dominate the market.