ALMUQARRAM - PowerPoint PPT Presentation

About This Presentation
Title:

ALMUQARRAM

Description:

Dolphin PU foam is a high-quality adhesive foam with excellent bonding strength that is applicable to a wide range of surfaces. It is commonly used in buildings to fill and enclosed spaces between roof tiles, concrete slabs, wall cavities, drilled holes, frame construction, gaps around windows, and another substrate. It’s a single component, moisture-curing, and self-expanding polyurethane foam. – PowerPoint PPT presentation

Number of Views:1
Slides: 4
Provided by: almuqarram
Category: Entertainment

less

Transcript and Presenter's Notes

Title: ALMUQARRAM


1
Dolphin PU Foam
Dolphin PU foam is a high-quality adhesive foam
with excellent bonding strength that is
applicable to a wide range of surfaces. It is
commonly used in buildings to fill and enclosed
spaces between roof tiles, concrete slabs, wall
cavities, drilled holes, frame construction, gaps
around windows, and another substrate. Its a
single component, moisture-curing, and
self-expanding polyurethane foam.
Dolphin PU foam by Al muqarram is worth every
penny. It has remarkable weather resistance and
comes with the benefit of multi-purpose use.
Polyurethane Foam reacts swiftly with moisture in
the air and expands after application. It
adheres exceedingly well to a wide variety of
surfaces including wood, concrete,
plaster, plumbing, etc. thanks to its great
adhesive power and once you start using
Dolphin PU foams, there is no going back.
Application instructions

Shake the PU foam can vigorously for 45 to 60
seconds before and between uses. Clean the
surface from dirt, greases, and dust to
facilitate maximum adhesion. For metallic
surfaces, get rid of rust.
Protect adjacent surfaces with tape or plastic
film. Remove the seal cap and put clean nozzle
spray.

Hold the cylinder upside down and dispense
slowly. Spray the product in thin layers while
moving your hand in one specific direction. Fill
the opening only 50 full to allow proper
expansion. It usually takes 10 minutes for the
hoam to cure properly. Wait for 1 hour and then
use a knife to smooth and trim excess
foam. Recommended single layer thickness is 5-8
cm. You can apply several layers with a minimum
of a 12 hours gap.

Overfilling and PU foam drops can be cleaned with
paint thinner acetone, Toluene, or Nail polish
remover. It is advisable to use the entire
quantity of a PU foam can within 2 hours
of opening the can to avoid clogging of cured
material inside the trigger and straw line or gun
lines.

FOR SMALL GAPS Dispense PU foam slowly and fill
the gap with 50 of volume and allow the foam to
expand and fill the rest of the gap.
FOR BIG GAPS Use multiple coats of PU foam.
Sprinkle a small amount of water between layers
to speed up the curing process.
Storage and shelf life Dolphin PU foam has quite
a long shelf life provided you maintain good
storage conditions. Always store the can in an
upright position away from exposure to open
flame, direct sunlight, and temperature exceeding
50 degrees celsius. Excessive heat can cause
premature aging of components resulting
in shorter shelf life. Keep away from (Strong)
acids and (strong) bases.
2
Store in a cool, dry, and well-ventilated area
and you will maintain the shelf life of Dolphin
PU Foam for 15 months from the date of
manufacturing.
Where is it used?
Doors and windows assembly is the most effective
utilization region of Dolphin PU Foam. It is used
for the insulation of electrical installations,
hot and cold water pipes, adhesion of roofing
tiles, tightness of terraces, concrete shear wall
buildings, industrial roof insulation, cold
storage houses, and ice plants, decks of ships
and yachts, filling of the voids between external
thermal insulation materials, adhesion
of insulation materials, filling of the voids and
insulation of dry food storages and for a lot
more purposes.
The biggest benefit of PU foam keeps the pests
away
PU foam is made up of self-expanding material and
hence offers the biggest advantage of filling up
even the hard-to-reach cracks and crevices. These
small holes are the favorite places for the pests
to grow and multiply. By covering these holes
with PU foam, you get protection from insects and
other pests.
Special features of Dolphin PU foam by Al Muqarram
Durable airtight seal prevents air infiltration
and energy loss High insulating value saves
energy and money. Environment friendly contains
no CFCs, no HCFCs, ozone friendly, non- toxic
PU foam

Available in two sizes 500 ml and 750 ml metal
cans.

One thing you will never get stuck with after
buying this can of Dolphin PU foam by Al Muqarram
is REGRET. So, stop waiting and make your first
purchase today!
3
Only two pages were converted.
Please Sign Up to convert the full document.
www.freepdfconvert.com/membership
Write a Comment
User Comments (0)
About PowerShow.com