Glentek AC, 8192 Line Brushless Amplifier

1
GLENTEK AC, 8192 LINE BRUSHLESS AMPLIFIER
Arowwai Industries
F A D A L C N C P A R T S S U P P O R T S E R V
I C E S
2
ABOUT FADAL AMPLIFIERS
Axis amplifiers are electronic devices or
circuits used to increase the magnitude of the
signal applied to their input. The 8192 Line AC
Ampifier is used with Glentek MTR-0142 Baldor
MTR-0146. We recommend you buy the ITS or Glentek
AMP-0040 instead of the AMC AMP-0034. For more
information see our Amplifier Repair Services.
Note Glentek part's AMP-0029 and AMP-0040 are
accepted. Cores must be repairable in order to
receive a refund. AMC brand amps are not
accepted.
3
THINGS TO KNOW ABOUT FADAL MACHINE AMPLIFIERS
Axis amplifiers are electronic devices or
circuits used to increase the magnitude of the
signal applied to their input. Fadal first
designed their 8192-line count amplifier with the
help of Glentek. Later they also partnered with
Advanced Motion Control (AMC) to develop
different types of Amplifiers. These brands
continually upgrade their products with the
latest technologies, and they feature fault
indicating LED lighting and users can easily
interpret the LED indicators on the front of the
amp with Fadal maintenance manual.
4
General Safeguards and Amplifier Adjustment
RELATED PRODUCTS TO CONSIDER

• Each of the Fadal amplifiers comes with an
  instruction manual containing the safety
  instructions to avoid any kind of malfunctioning
  or personal injuries. The first step of any
  Fadal parts installation is to cut off the
  electricity supply one must disconnect all power
  to the machine before adding any component. It
  is highly recommended that a qualified
  technician is used for safe installation or
  servicing.
• All brushless Fadal amplifiers are adjusted prior
  to shipping and may only need minor adjustments.
  There are three pots that will need to be
  adjusted, such as the compensation pot, signal
  gain pot, and balance pot. The goal of this
  adjustment is to dynamically balance the amp
  with all the XYZ axes for proper functioning.

5
FEATURE AND BENEFITS
Fadals Glentek AC brushless amplifiers are
featured with 5000 and 8192 Line Encoder. These
are designed in a linear way and rotate in 10
amps continuous and 20 amps peak. Frey are
designed to drive a 6-pole motor with a 5000-line
encoder. New Fadal CNC Machine Amplifiers are
designed to produce better current output
conditions in three stages continuous, peak,
and fold back modes. Instead of just shutting
down the amplifier after a 3-second peak current
output, this new Fadal amplifier automatically
folds back to continuous motor output. Like
others, amplifiers of Fadal, not just lighting an
LED to indicate a FAULT mode, but designed to
provide better functionality to help with
diagnostics The FAULT LED lights up when the
machine amplifier exceeds the continuous duty
cycle to indicate starting as for the first 3
seconds it uses 200 peak current output. After 3
seconds, it folds back to the 100 continuous
output rating.
6
FEATURE AND BENEFITS
The FAULT LED lights up when the machine amplifier exceeds the continuous duty cycle to indicate starting as for the first 3 seconds it uses 200 peak current output. After 3 seconds, it folds back to the 100 continuous output rating. The LED light goes OFF as the continuous rating of the amplifier and the 3 second Peak output capability is restored.
The Fault signal goes LOW only when the amplifier is actually malfunctioning or the motor and/or wires are disconnected or shorted. These new models of Fadal amplifier are covered with a protective coverto protect the Fadal amplifier from handling and shield it from stray chips that can end up in the electrical cabinet.
7
CONTACT US
Phone [phone] Website www.itscnc.com
Email parts_at_itscnc.com Address 9182
Independence Ave. Chatsworth, Ca. 91311
8
THANK YOU
W W W . I T S C N C . C O M