Process To Clean Your Water Softener

1
Process To Clean Your Water Softener
2
Make Sure Your Salt Reservoir is as Empty as
Possible
This will make the task easier and ensure you can
do a better job at cleaning the tank. Now, if
its full as you read this, dont add any more
salt and come back to your tank in a few weeks
when it gets close to being empty. And guess
what? By letting the salt level drop really low,
you might even be helping the water softener
system work better.
3
2) Break Down Salt Residues
Once the reservoir or tank is empty, youll most
likely find a rock-hard salt deposit that has
formed over time. To remove the salt clog, use
the handle of your broom down to tap the salt
until it breaks. If you notice that the broom
handle doesnt do the trick, find something a bit
sharper.
4
3) Dissolve The Salt Residues
Now that youve broken up the salt clog, time to
dissolve it and remove it completely. Use a
cleaning solution designed to target whatever
minerals you have in your home. For instance, if
your water is higher in magnesium than calcium,
make sure to use a cleaning solution that
specifically targets magnesium.
5
4) Flush Out The Residues
Now that the residues have been broken down and
dissolved in the cleaning solution, the next step
is to remove them. Locate your control valve and
switch your unit to the regeneration mode. This
mode will automatically flush out the grime and
minerals from the hard water. Perform this
process twice to make sure any residues have been
flushed out.
6
5) Switch Your Water Softener Back To Normal Mode
The last step to clean your water softener is to
switch back to normal mode and run tap water
through your tank to rinse out any cleaning
solution that may be left. And after youve
completed this step, dont forget to refill your
tank with salt!
7
Contact Us
Filtersmart Call 1(866)-455-9989 https//filter
smart.com/ sales_at_filtersmart.com