How Do Floor Scrubber Machines Work

1
How Do Floor Scrubber Machine Works?
2
STEP -1
First, make sure that your machine is fully
charged. It shouldnt run out of batteries. Also,
make sure that you charge the batteries only when
it is needed as doing too often may hamper the
life of the batteries.
3
STEP - 2
Make sure that you sweep or dry floors to remove
dirt or debris. This is necessary to avoid
surfaces from getting dirty by the leftover
debris on the floor. This can also lead to
additional wear and tear of the floor scrubber
machine. Wet dirt is more difficult to remove and
can damage the squeegee.
4
STEP - 3
After the completion of the above steps, fill the
automatic cleaner tank with your desired cleaning
solution. Choose alkaline cleaners for concrete
floors and neutral cleaners for sealed floors.
Turn the machine on and adjust it to your desired
settings according to the surface to be cleaned.
5
STEP - 4
Next step is to attach the brush. The brushes can
spin on their own being automatic. Next, lower
the squeegee and begin the cleaning process with
the self-automated spinning brushes.
6
STEP - 5
The scrubber can be run with a single pass. For
dirtier surfaces, you need a pre-scrub or
double-scrub. In this, you first operate the
squeegee up off the floors with a cleaning
solution and then run the machine for better
cleaning.
7
STEP - 6
Now, the floor scrubber machine begins its
operation of cleaning. First, the scrubber will
distribute water into the brushes for cleaning,
through its solution tank. Then, the squeegee
will work to recover the dirty water into the
recovery tank, while, the vacuum will leave the
floors dry.
8
Thank You
To Know More Visit www.clenlidirect.com