6 Things To Check On A Scrubber Dryer

1

6 THINGS TO CHECK ON A SCRUBBER DRYER
2

Check The Squeegees Scrubber dryers need to be
maintained to get top-level performance. A
scrubber dryer is segmented into different parts.
Among all, first, you must check the squeezes. If
possible, take the squeeze bar out of the
machine. Next, clean the squeeze bar if it is not
properly cleaned. Check the blade properly as on
the top side it needs to be flat. If you identify
any damage, consider an immediate replacement.
3

Check The Setup of The squeegee Once the squeeze
bar is fixed, put it down and start the vacuum.
Take the scrubber dryers Ireland forward to
ensure that the squeeze is sitting on the floor
properly or not. The vacuum must work properly to
clean the things. Adjust the squeeze bar until
you are getting an even kiss of blades on the
floor. While operating the machines, always check
the sitting on the floor.
4
Check The Squeegee Hose While checking the
squeeze, check the pipe or hose that is
connecting the squeeze bar with the tank. It
collects the dirty water from the tank. Hence,
often it gets dirty and blocked from inside. The
blocked pipe will not be able to collect all the
dirty water and hamper the performance of the
scrubber. If you find any blockage, run warm
water through it to clear it.
5
Check The Recovery Tank Filter A filled recovery
tank hampers the cleaning process often. Hence,
check the recovery tank and the filter. However,
all the dryers dont have filters. Usually, the
filter is placed on outlet vacuum motors. You
must ensure that the filter is clean before you
start using it. However, if it is not, then
remove it to clean.
6
Check The Solution Filter Most of the scrubbers
have solution filters in them. Generally, it is
placed under the machine within a bowl. Removing
the filter will help you in draining the filter.
Hence, take the scrubber outside before removing
the filter. You can clean the filter with warm
running water to clear the blockages in the
scrubber dryers Ireland.
7
Check The Battery Levels It applies only to
those machines which run on batteries. Before you
start the cleaning, the process checks the
battery level. If the battery is low, then put it
on charging. It is better to give a full charge
to the battery once a week. Besides, maintain the
battery health too.
8
Thank You
To know more visit https//clenlidirect.com/