metallurgyproducts

1
Surface Deburring Polishing Finishing Machines

• www.metallurgyproducts.com
• 919810868858

2
Abrasive long belt surface deburring and
finishing machines

• These abrasive belt machines are used to remove
  weld burrs and are very flexible with adjustable
  table in x and y directions, where the work piece
  can be moved vertically and horizontally in x,y
  and z directions and adaptability to finish the
  surface as per requirements, the machines are
  also tailor-made as per the requirements of
  single and double abrasive belts and or roller
  brushes for different matt and satin finishing of
  the surfaces.
• www.metallurgyproducts.com 919810868858

3
Abrasive long belt surface deburring and
finishing machines
www.metallurgyproducts.com 919810868858
4
Aluminium Profile Square, Rectangle Round
polishing and surface finishing machines

• Aluminium Profile Square, Rectangle Round
  deburring and Surface Finishing polishing
  machines, these aluminium Profile polishing
  machine is used to have a brush  hairline and
  satin finishing on extruded aluminium surfaces
  prior to anodizing, where the abrasive Brushes
  used cleans the surface of aluminium and
  eliminate extrusion lines and scratch marks on
  the surface. The etching duration of satin
  brushed aluminium prior to anodizing is much less
  than the un-brushed counterparts resulting in
  less chemical consumption in etching and waste
  water treatment and therefore considerable
  decrease in production costs.
• The obtained finish is of fine mechanical satin
  type, with excellent appearance like
  Scotch-Brite. No paste and no dust created during
  the work. The abrasive brushing head works at
  high RPM and different types of abrasive grit
  brush offer smooth and uniform brush effect with
  dry process
• www.metallurgyproducts.com 919810868858

5
Aluminium Profile Square, Rectangle Round
polishing and surface finishing machines
www.metallurgyproducts.com 919810868858
6
Aluminium Sheet and Circle Polishing Machine

• The Aluminium sheet polishing machine is used for
  brush finishing surfaces of hairline and matt
  finish prior to anodizing. Abrasive Brushes clean
  the surface of aluminum and eliminate scratches,
  marks, foreign particles, acid patch, water
  scaling and other residues. The etching duration
  of satin brushed aluminium prior to anodizing is
  much less than the un-brushed counterparts
  resulting in less chemical consumption in etching
  and waste water treatment, therefore considerable
  decrease in production costs.
• The obtained finish is of fine mechanical satin
  type with  and excellent appearance like
  Scotch-Brite. Different type of abrasive grits
  brushes offer smooth and uniform brush finishing
  effects with dry process
• www.metallurgyproducts.com 919810868858

7
Aluminium Sheet and Circle Polishing Machine
www.metallurgyproducts.com 919810868858
8
Anti finger- anti stain coating and finishing
machines

• The Anti finger Coating Line Anti-fingerprint
  coating are always applied after final surface
  preparation and all  other processes such as
  hairline, satin, mirror, vibration, bead blasting
  and surface colouring finish, which make sure
  that the sheet cleaning, shining and colour
  consistency is maintained without any fingerprint
  stains on the finished surfaces. It is a best
  choice no matter for interior or exterior
  building decorations, especially in public area
  in which public movements is extensive, Our
  Anti-Smudge coating creates a protective layer on
  the surface of an object to prevent the effects
  of fingerprint, oils and dirt, We tare here to
  offer our services if you are looking for 
  methods to make SURFACES look better and
  finishing to last longer and yet looking for a
  low maintenance without much of effort  and
  without impacting the environment, We  strive to
  proper surface treatments for best aesthetic
  looks  and maintaining new like looks and  Our 
  effort is  to generate the worlds most suitable
  surface protective products with innovative
  materials, ease and safety to use  and deliver
  long term Cosmetic looks  and environmental
  protection.
• www.metallurgyproducts.com 919810868858

9
Anti finger- anti stain coating and finishing
machines
www.metallurgyproducts.com 919810868858
10
Anti finger- anti stain coating and finishing
machines
11
Flat copper and aluminium bus bar deburring and
polishing machines

• Flat aluminum and copper  bus bar surface
  deburring, polishing machines  are ideal choice
  for copper and aluminum rectangular and flat
  surfaces to achieve different kinds of surfaces
  such as hair-line finishing, high gloss mirror
  shine, satin and matt surface finishes with the
  help of   different quality types of  abrasive
  flap brush wheels manufactured and supplied as
  per your requirements
• www.metallurgyproducts.com 919810868858

12
Flat copper and aluminium bus bar deburring and
polishing machines
13
Flat copper and aluminium bus bar deburring and
polishing machines
www.metallurgyproducts.com 919810868858
14
FRP Fiberglass grating- grinding and side
polishing machines

• FRP or Fibre Glass  gratings which is made up of
  different variety of products basically stands
  for fibre reinforced plastic. and these grating
  and of different structural dimensions and our 
  Dust cleaning and surface finishing machines  is
  value addition operation in FRP Grating
  Production, After sanding of the Grating there
  is  lot of dust that sticks onto the surface and
  inside valley area and which needs to be cleaned
  for cosmetic looks and with use of  Digital
  roller abrasive brushing cleaning  this machine
  which is specially developed for uniform and
  precise cleaning operation on FRP Gratings and
  Blocks is a new concept. This machining process
  is  able to Perfectly clean the work surface in
  short time with high productivity results and in
  minimum time period.Features Function Multi
  head Brush Cleaning station, Synchronize with
  full line with One stop Operational control,
  Internal Electrical Control Panel, Separate
  electrical control for all function such as Soft,
  bright, and homogeneous cleaning of the  surface
  appearance, Dry and wet operation along with dust
  extraction system, Adjustable conveyor speed
  (belt / roller) from) 0.5 to 10 MPM, Emergency
  security switch, Reversal conveyor speed for
  emergency control are different features of these
  machines.
• www.metallurgyproducts.com 919810868858

15
FRP Fiberglass grating- grinding and side
polishing machines
www.metallurgyproducts.com 919810868858
16
Grinding, Deburring and edge rounding machines
for laser-cut and punched parts

• Deburring and edge rounding machines for Metal
  laser-cut and punched parts- Wide Belt Deburring,
  Edge Rounding and Finishing Machine specially
  designed for Laser Cut parts Burr removal Edge
  rounding, Inside  and Outside Contours, We offer
  different types Deburring and Edge rounding
  machine for Sheet metal Processing Industries as
  per requirements and these machine are suitable
  for metal finishing and deburring at an
  affordable price with many standard tailor-made
  features.
• The  Abrasive belt grinding machine for deburring
  and finishing sheet metal and other flat parts
  that needs a radius edge with flap abrasive
  brushes. This is an automatic feed-tough machine
  with a belt for product movement and  the machine
  will deburr and sand a radius to the sharp edge
  on cut out parts. Sanding into the conveyor belt
  is possible without damaging the belt, these
  machines are suitable for works with steel,
  copper, brass,  stainless steel, aluminium and
  many other types of metal parts
• www.metallurgyproducts.com 919810868858

17
Grinding, Deburring and edge rounding machines
for laser-cut and punched parts
18
High speed square tube deburring and polishing
machines

• High speed square and rectangle tube deburring
  and polishing machines-
• Tube polishing machine is specially made for
  Square and rectangle tubes of different sizes .
  This machine is very economical and precise
  working with less power consumption and surface
  finishes of  Matt / Satin / Hair Line / High
  Gloss Finish can be achieved with different
  abrasives flap brush wheels,
• Surface Polishing Machine can perform any
  polishing operation on any Tube, It also deburrs
  all the component having burrs on surface, Heavy
  Duty Machine with Pneumatic Floating arrangement
  for sturdy operation are available
• www.metallurgyproducts.com 919810868858

19
High speed square tube deburring and polishing
machines
www.metallurgyproducts.com 919810868858
20
Long Belt series edge rounding and deburring
machines

• Deburring   The oscillating drum allows the
  machine to remove burrs from parts up to 100 mm
  thick reliably and fast even in large
  quantities.
• Slag removal The slag on oxyfuel or plasma-cut
  parts has to be removed by manual grinding before
  the actual deburring process takes places and
  with this machines, having to manually remove the
  slag is no longer necessary.
• Edge rounding  The edge rounding of edges
  generated from flame-cut parts includes the
  removal of the sharp edges along the material. In
  addition an adequate radius is conducive for
  paint adhesion. With the help of the deburring
  blocks, the edge rounding is achieved on both
  sides of the material within the process of
  polishing.
• www.metallurgyproducts.com 919810868858

21
Long Belt series edge rounding and deburring
machines
www.metallurgyproducts.com 919810868858
22
Metal Coil and strip deburring and polishing
machines

• metal Coil and strip deburring and polishing
  machines Polishing of metal coils is one of the
  most looked after value addition to the product
  and this is where this machine works in deburring
  and surface finishing for high productivity with 
  flexibility in configuration of the sizes and
  shapes of strips with lower operating costs.
  These machines are available for both dry and wet
  processing for fast brush finishing and can offer
  a wide range of different finishing effects of
  the metal surfaces in terms of shinning and self
  design surface finishes is achieved such as matt,
  hair-line shinning, satin finish etc.
• Polishing Machine Technical Features Function
• Single Multi head Scotch Brite Polishing
  Machine brushing
• No heat generation No Sheet deformation
• Uniform bright Surface finish effect on metal
  surface though out the length.
• Economical operational cost
• Auto feed Transport System
• Easy abrasives Roller brush replacement
• Different brush grits combinations are possible
  to perform different surface treatment and
  finishes
• www.metallurgyproducts.com 919810868858

23
Metal Coil and strip deburring and polishing
machines
www.metallurgyproducts.com 919810868858
24
Metal sheet deburring-polishing and shinning
machines

• Metal sheet deburring-polishing and shinning
  machines  Fabrika Series Polishing Machine are
  used for  Stainless Steel Sheet Metal Fabrication
  Industries metal Sheet Blank Polishing machine
  Suitable for Stainless steel and other metals
  Fabrication Industries for in-house Polishing
  work. Increases profitability by reducing cost
  and is widely used  for fabrications in
  industries such as Airport, Architectural wall
  panels, Beverage Food processing Equipment, Bus
  shelters, Elevators doors and interiors,
  Escalator trim, Hospital Furnitures, Metro and
  Railways, Mass transit equipment, Pharma and
  Dairy equipment, Restaurant and kitchen
  equipment, Shipbuilding, Application are endless
• Pick N Place sheet lifter
• Auto feed sheet loading Table
• Multi head Polishing Machine
• Transport roller table
• Quality inspection zone
• Surface Protection Lamination
• Dust collection system
• www.metallurgyproducts.com 919810868858

25
Metal sheet deburring-polishing and shinning
machines
www.metallurgyproducts.com 919810868858
26
Metal sheet deburring-polishing and shinning
machines
www.metallurgyproducts.com 919810868858
27
Metal sheet deburring-polishing and shinning
machines
www.metallurgyproducts.com 919810868858
28
Single Head Semi-Automatic End Edge Deburring
Machine

• Specially designed for Aluminium products such as
  heat sink, different Profiles, Box section Pipe
  these end deburring machine systems increase
  productivity by decreasing cycle times over hand
  deburring, Accurately brush penetration is
  maintained throughout each polishing process
  cycle leading to improved quality. Parts are
  clamped into End Edge deburring systems,
  increasing operator safety. Single End Edge
  deburring systems can be customized as per your
  requirements and applications.
• Working Principal
• Brush rotation on High RPM, Brush OD 400mm x 40mm
  Bristle length width
• Brush Head Movement Top and bottom
• Tube is fixed on platform with the help of
  fixtures.
• Platform movement from right to left Automatic or
  manual.
• Full cover body for dust protection,  One Head
  deburring station side edge working
• Working width Minimum 10mm Maximum 150mm
• Working length Min. 200mm, Max Long products
• Power supply as per your country suitable
• Dust Collector outlet (external Dust collector
  require Quote separately
• www.metallurgyproducts.com 919810868858

29
Single Head Semi-Automatic End Edge Deburring
Machine
www.metallurgyproducts.com 919810868858
30
Bend Pipe and rods deburring and surface
polishing machines

• Bend Pipe and rods deburring and surface
  polishing machines
• These machines are specially designed as per the
  requirements of polishing round bend pipes and
  tubes which is economical and gives uniform
  polishing effect through out the finished surface
• Surface finishings achieved are matt, satin,
  hair line, high gloss with different abrasive
  flap brushes and wheels
• Bend round Tube surface finishing applications
  polishing of small Capillary Tube, Brass / SS
  Tubes, Gas lighter cell, Kitchen Basket Rod
  Hardware manufacturer etc.
• www.metallurgyproducts.com 919810868858

31
Bend Pipe and rods deburring and surface
polishing machines
www.metallurgyproducts.com 919810868858
32
Deburring and surface polishing machines
www.metallurgyproducts.com 919810868858
33
Mobile Handheld Deburring, finishing and edge
cleaning machines

• Mobile Linear Polisher  It is a complete
  solution for stainless steel sheet and other
  metal shop floor, Every surface turns out
  perfectly with linear texturing, satin finish,
  hairline finish shadow free matt finish without
  streaks on it.
• Technical  Features
• Techno-generator consistent speed of the
  polisher, Even well-balanced under full load
  and uniform pressure on surface, Ergonomically
  design for better grip and handling, Fresh air
  flow mechanism to protect engineer from
  over-heating and dust jamming of the polisher.
• Available Abrasives consumable
• Sponge Roller for abrasives belt, Grinding Belt
  Zircon, Hairline Finish Brush, Matt Finish Brush,
  Satin Finish Brush, P2 BrighTex Pickling Gel,
  Anti Stain Coating liquid
• Uses of these machines in steps
• www.metallurgyproducts.com 919810868858

34
Mobile Handheld Deburring, finishing and edge
cleaning machines

• Machining Surface  Removing of a welded seams on
  the surfaces, Handling scratch or require light
  machine on flat metal surfaces, you have to
  fulfill first coated abrasives grinding belt with
  expandable roller,  Rough Material sanding /
  removal-Sanding Sleeves with grain of 36, 40, 60,
  80,120 offer effective surface grinding with very
  good surface finishing results. This surface is
  basic surface of subsequent grinding pattern.
  Require 2500 RPM for high sanding operation
  (Level 5-6) Resulting into -Surface grinding with
  a grain of 120 prior to satin-finish with the
  stainless steel set Rough deep Hairline Finish
  on metal
•  
• b)  Scratch pattern Surface 220 more volume of
  abrasive material in comparison with current
  wheels. Require 900-1200 RPM for grain finishing
  operation (Level 1-2), Hairline Surface
  Combination brush with Coarser and Finer grade
  provide uniform texture finish, Require 1200-1500
  RPM for fine graining operation (Level 2-3),
  Resulting in Kombi fine grade brush provide
  smooth hairline finish after sanding process
• c) Matt Finish Surface Pharma, Food, dairy and
  commercial Kitchen equipment manufacture demand
  matt finish, by use of plain Coarser wheel,
  Require 900-1200 RPM for Matt operation (Level
  1-2),Satin Finish Surface  Stainless steel
  surface get rusty due effect of weather, and
  regular use. Smooth satin finish provide rust
  resistance surface on stainless steel. Mostly use
  in architect fabrication. Require 2500-2800 RPM
  for Satin finishing operation (Level 5-6), Result
  Rust resistant flap brush provide smooth satin
  finish on stainless steel and protect the surface
  from rust and dust from the weather effect and
  regular use
• www.metallurgyproducts.com 919810868858

35
Mobile Handheld Deburring, finishing and edge
cleaning machines
www.metallurgyproducts.com 919810868858
36
Mobile Round Tube Polisher

• There are many types of tube fabrication. Tight
  radius bends, wide sweeping curves or simple long
  lengths. Whatever the type of tube or pipe you
  need to finish, achieving a consistent high
  quality finish is always the challenge, This
  powerful tube polishing machine with an extremely
  high torque ensures amazing power transmission.
  The adjustable speed guarantees comfort and is
  user-friendly, The ingeniously placed handle
  ensures 100 controllable working pressure. The
  result is an uniform and flawless finish in less
  time and using less material on round tubes.
  Electronic Speed control, Marathon Heavy Duty
  motor Double Reduction Gear system, Precisely
  Guiding of belt Mobile light weight, Tube,
  Pipe, Solid rods.
• www.metallurgyproducts.com 919810868858

37
Mobile Round Tube Polisher
www.metallurgyproducts.com 919810868858
38
Corner Easy Polisher

• The ingeniously placed handle ensures 100
  controllable working pressure. The result is an
  uniform and flawless finish in less time and
  using less material on corner accessibility is an
  important term in the world of abrasives. Nearly
  anything can be manufactured and welded, but it
  is not much help if the piece cannot be finished.
  The Corner Weld Polisher offers you the
  accessibility and freedom of movement you require
  for a professional finish in hard-to-reach areas
  and corners. Finishing inside joints and removing
  weld seams becomes childs play with this
  innovative extension arm, This is a ideal
  Grinding machine for fillet weld, It can working
  on the areas that difficult to access. at
  handrails processing, The stainless flanges Disc
  and aluminum alloy Sanding Arm design can prevent
  the surface from Metal Dusts contaminating during
  grinding, Technical Features Powerful and
  stable engine, Variable speed adjustment, Easy to
  carry, Light weight, Techno-generator consistent
  speed, Even well-balanced under full load,
  Ergonomically design for better grip, Fresh air
  flow mechanism to protect engine from
  over-heating and dust jamming
• www.metallurgyproducts.com 919810868858

39
Corner Easy Polisher
www.metallurgyproducts.com 919810868858
40
Polishing and surface finishing
www.metallurgyproducts.com 919810868858
41
Surface Finishing machines and media

• Metallurgy products acts as manufacturers
  representative in northern states of India for
  mass finishing machines and media for surface
  improvements of  products of Engineering, Defense
  , Rubber, Electronics, Automobile, Textile,
  Ceramic, Plastic, Epoxy,  Metal casting, Stamped
  and Extruded goods, Jewelry , Surgical, Sanitary
  and Hardware, Decorative items etc. for which we
  specialize in precision surface deburring,
  polishing, smoothing and shinning from big
  industrial items to delicate medical transplants.
• We represent for mass deburring and polishing
  machines, media and technology from around the
  world and offer complete product line of mass
  finishing processes to the users
• www.metallurgyproducts.com 919810868858