Steps To Identify Breaker Problems

1
Steps To Identify Breaker Problems
2
There is nothing more frustrating then a tripped
breaker, especially when it keeps happening. I
think it is important to say that electrical
circuit failures are best identified and repaired
by a professional licensed electrical contractor
who can identify the problem quickly and safely
3
restore electricity for your home. These problems
can sometimes be easily fixed, but sometimes they
can be a much larger symptom. If you would like
to try to do some troubleshooting before calling
a professional, below are some tips that will
help point you in the right direction.
4
1. Identify What is on the Problem Circuit Turn
the circuit breaker off to easily identify
everything that is without power. Record the
electrical load requirements of each device
connected to the circuit and add up the total
load to see if the amount exceeds the size of the
circuit breaker.
5
If the total connected load is higher than the
circuit rating then you may need to have an
additional circuit installed or move a device
that is connected to the circuit and relocate it
to a different location which is served by a
different circuit.
6
2. Evaluate the Circuit If the total connected
load is under the size of the circuit breaker
then unplug, disconnect or turn off all of the
devices on the list. Visually inspect each device
for any possible problems. If a problem is found
with a device then have it repaired.
7
3. Troubleshoot Repair the Circuit If you
ruled out 1 and 2 above, then you need to look
at the items that are connected to the circuit
for possible problems such as outlets and
switches or wiring. This is probably the time to
call in a professional.
8
If you find that you are in need of an
Electrician, Lemere Electric is here to help.
Call today [phone] or click here to
request an estimate.