How To Install an Indoor Putting Green

1
How To Install an Indoor Putting Green
2
Introduction

• If you reside in cold regions, then you can
  understand that practicing golf in a cold area or
  during the winter season is so difficult. Winter
  months are hard to deal with and therefore a
  great idea is to build a practice putting green
  in your basement. The indoor putting green can be
  built anywhere in your house and it is ideal to
  practice golf. You just have to move with a
  little planning and motivation. So, following are
  some ways which will help you put in the putting
  green and you will learn about its benefits as
  well.

3
(No Transcript)
4
Step 1

• You should measure your basement and then select
  an area where you would like the putting green
  and then measure the footprint of the putting
  green. You can choose it to be 6x16so that it
  can go almost the full length of your basement
  and it should be wide enough to put at least two
  holes on each end. You must base this measurement
  as per the standard length of the materials which
  you decide to buy and make sure to use every
  material in full form.

5
Step 2

• The tools which you will need are safety goggles,
  power drill, 4.25 hole drill built and a
  circular saw. To make the best indoor putting
  green you will need materials like, 2" wood
  screws, 1" thick MDF which is a dense kind for
  the floor, for outer framing you will need 2" x
  6"s, for inner framing support 2" x 4"s,
  Regulation golf cups or you can make use of PVC
  piping. You can use the putting green ½ inch or
  two strips of 3x6 of birdieball putting green.
  The finished size can be of somewhat 6 feet x 16
  feet and the expensive thing here is BirdieBall
  putting green, you can reduce the cost by making
  a small putting green.

6
Step 3

• Make use of 2x6 to create the outer framing of
  your indoor putting green. Then make use of 2 x
  4 to build the inside frame support. The areas
  where you want the golf holes to go should not be
  blocked when you add the inner framing. Add
  enough amount of inner support so there should be
  no weak areas in the flooring. You need to test
  this a few times by placing the flooring down at
  least once in a while so you can know about the
  areas that are weak.

7
Step 4

• Make use of the 1" thick MDF to make the flooring
  and drill it in the right place. If the inner
  framing is taller than your outside framing it
  will help you create the inset of your flooring
  and after insertion, you will have 1 lip that
  will stop the golf balls from rolling in the
  green.
• Now you can put the Birdie Ball green on the top
  of the floor and make use of 4.25" hole drill so
  you can drill the cup holes in the platform for
  the putting green. The cutter for BirdieBall will
  help to cut the green.

8
Step 5

• Once you are done with everything and things are
  proper at their places, then its time to print
  the logo of your putting green. Now, its time to
  practice golf at home, relax and hone your skills
  from scoring distances. In the winter months, you
  dont have to stop playing golf. Simply, come to
  your new area of golf and enjoy the game. You
  will have everything in the comfort of your home.
  So, get ready and have fun.