how to fix leaking cartridge of xerox printers? - PowerPoint PPT Presentation

About This Presentation
Title:

how to fix leaking cartridge of xerox printers?

Description:

.go to the presentation and try to solve your problem and if problem still occur related to leaking cartridge of xerox printers then kindly visit this website and you can talk to our experts and then will help you to resolve your issues. – PowerPoint PPT presentation

Number of Views:11
Slides: 6
Provided by: setroll111
Category:

less

Transcript and Presenter's Notes

Title: how to fix leaking cartridge of xerox printers?


1
How to fix leaking cartridge of Xerox printer?
Call pc expert
2
Introduction of Xerox
  • Xerox is an American company and they are
    responsible for selling digital documents
    products and services all over the globe.
  • . Its headquarter is situated in Norwalk
    Connecticut and it was earlier situated in
    Stamford, Connecticut. Its headquarter moved to
    Norwalk Connecticut in October 2007.
  • Most number of its employees is from Rochester,
    New York. In this area the company was founded.
  • The name of the founder of this company is Joseph
    C. Wilson and Chester Carlson. Current chairman
    of this company is Keith cozza

3
How to fix leaking cartridge of Xerox printer?
  • Machine cover will be opened and cartridge from
    the machine will be removed and then clean the
    cartridge with soft-alcohol based cloth. If your
    using water based solution for cleaning then it
    will be harmful for the electrical components and
    those water-based solutions can damage electrical
    components.
  • Printer head will also be wiped where it connects
    with toner. There can be leakage at the
    connection point if there is any dust or debris
    there
  • Now rub a white textile over the cartridge until
    you find leaking part. if there is only a single
    colored at vent then that mean that there is no
    defect in the component

4
  • Once you know where the location of drop, check
    is it and observe if you can see a fault. if not
    press it until you find the injured section.
  • After finding the damaged location, polish it
    with a textile and after that cut a slice of
    large strip to seal the injured area.
  • It will be covered up with the tape properly and
    make it smooth as much as possible. Then
    cartridge will be placed back into the printer
    and check whether the damaged area is stiffly
    protected.

5
Thank you
Write a Comment
User Comments (0)
About PowerShow.com