Title: How to fix my Epson Ink Cartridge Chip?
1How to Reset an Epson Ink Cartridge Chip?
2When the ink in the cartridge is low, the chip of
the cartridge gets tripped because of which the
cartridge does not work properly. It is a common
myth that if the cartridge gets tripped it cannot
be used anymore and then you need to buy a new
one. To break the myth here is the solution on
how to reset the chip and refill the cartridge
with new ink.
3- Tape over the outlet holes to close them before
the refilling process starts. You can all the
required products used for refilling in the
refill kit of Epson that can be bought online or
from the retailer. - Poke a hole in the label on the top of your ink
cartridge for refilling. - With the help of a plastic syringe, inject the
new ink into the holes chamber. - At the bottom of the Epson chip resetter,
notches and ridges will be present, which are the
resetting pins. They are in different sizes for
different cartridge types. Remove the covering by
pulling out the plastic film from it.
4- On the back of your cartridge, above the outlet
holes, chip will be present. Line up the chip
with the resetters pins. - Touch the pin of the resetter with the chip and
press it firmly till you see a green LED light
flashing in the resetter. It will only apper if
you will do it correctly otherwise a red LED will
flash. Remove the cartridge and reconnect if that
is the case. - If you see green LED then hold the resetter and
the cartridge together till the light starts to
blink and turns off by itself. When the light
becomes off the cartridge chip has been reset.
5If you are not able to get it fixed, then get
quick way out of the difficulty by reaching us on
our Epson printer support number 61-283173389
You can also reach us via other platforms like
live chat and email service, where all the
technicians are certified experts in their field,
so they will comprehend your problem more easily
and will give you the best solution possible.