Top Quality heat pipe

1
Maniks Best Quality Heat Pipes/Heat Exchangers

• What are Heat Pipes/Heat Exchangers?

2
INDEX
Sr no Content
1 What is Heat Pipe 
2 Introduction
3 Working Principle
4 Working of Maniks Heat Pipe
5 Why Maniks?
6 Heat Pipes in Various Industries
7 Heat Pipe Applications
9 Thanks You
3
What is Heat Pipe 

• Hollow cylinder filled with a vaporizable liquid
  under vacuum. The Heat Pipe functions as follows
• Heat is absorbed in the evaporating section.
• Fluid boils to vapour phase.
• Heat is released from the upper part of cylinder
  to the environment vapour condenses to liquid
  phase.
• Liquid returns by gravity to the lower part of
  cylinder (evaporating section).
• When heat is added to the evaporator section, the
  working fluid boils and converts into vapor
  absorbing latent heat.

4
(No Transcript)
5
Introduction

• Heat pipes are Heat transfer devices. They are
  Hollow cylindrical pipes, filled with a
  small/little amount of working fluid that
  evaporates to produce heat. This heat then
  rejected from another end for its application on
  various industrial processes.
• A heat pipe is a closed evaporator-condenser
  cylindrical system sealed under vacuum with a
  small amount of working fluid. During
  non-operation, the working fluid contained inside
  the wick structure lines the inner diameter of
  the heat pipe.
•  
• At the destination end, known as the condenser,
  the heat given up by working fluid is rejected to
  an external heat sink. The fluid then returns via
  wick structure and passively pumps the fluid back
  to the heat source using capillary force.

6
Working Principle

• The working of a heat pipe is base on the
  principles of Thermal Conductivity and Phase
  Transfer.
• Basically heat pipe is a closed tube with an
  internal wick material and small amount of
  working fluid of which one end situated is in the
  heat generation.
• Heat transfer is done by high thermal
  conductivity and dissipation is done to desired
  location by using the phenomena known as
  capillary action.

7
Working of Maniks Heat Pipe

• Maniks heat pipe is constructed with a wick or
  capillary structure, a working fluid and a vacuum
  sealed tube
• When one end of the heat pipe is heated
  temperature of the liquid inside the heat pipe
  will also increases gradually and after large
  temperature increase it vaporizes.
• The transfer of heat through heat pipe takes
  place very quickly with very less temperature
  drop over a long distance.
•  
• http//www.maniks.com/heat-pipe-heat-exchangers.ht
  ml

8
Why Maniks?

• Maniks is a traditional supplier of
  electromechanical devices since last three
  decades. They have proven their prominence for
  contribution in heat pipes repeatedly.
• Heat pipes have lot many advantageous points over
  the conventional thermal pipes they are as
  follows
• High Thermal Conductivity (10,000 to 100,000 W/m
  K)
• Reliable
• Passive operation
• Low Cost
• Shock/Vibration tolerant
• Freeze/thaw tolerant

9
Heat Pipes in Various Industries

• Electronics and Electrical devices cooling Heat
  pipes are used to cool transistors and high
  density semiconductors by extraction of heat from
  these devices.
• Heat Exchangers Power industries use heat pipe
  heat exchangers as air heaters on boilers.
• Aerospace applications Heat pipes have also
  proven in aerospace applications that transmit
  thermal energy at rates millions.
• Other applications Production, medicine and
  human body temperature control, engines and
  automotive industry etc.

10
Heat Pipe Applications

• Apart from above applications heat pipes have
  been used in the following areas
• Waste Heat Recovery from Air Conditioners
• Heat Pipe Air Preheaters for Boilers
• Waste Heat Boilers to Recovery Heat
• Heat Recovery at the Kiln Furnace
• Spray Drying

11

• Thanks You