ABB CM-UFD.M33 Solar Protection Relay | MainsPro | ComAp InteliPro

1
solar protection relay Comap mainspro ABB
CM-UFD.M33 Comap intelipro pv

• Solar Protection Specialist n Australia
• BCJ Controls

2
ComAp MainsPro

• The ComAp MainsPro solar protection relay is used
  for grid-tie applications, and provides
  anti-islanding protection as required by
  Distribution Network Service Providers for solar
  over 30 kW. It can be used with any embedded
  generator systems such as gen sets,
  co-generation, or renewable energy sources
  including photovoltaic plants or wind turbines.
  The ComAp MainsPro grants adjustable voltage,
  frequency, and loss of mains functions to
  safeguard the distribution network and the
  generators.

3
ComAp MainsPro

• With ComAp MainsPro, no special knowledge is
  needed for the installation process and no
  additional units are required. This makes it an
  optimal solution for both untrained personnel and
  professionals. The unit is designed to comply
  completely with Utilities connection
  requirements and statutory codes, offering a high
  level of protection and safety when working in
  parallel to the mains.
• This item can be used within our secondary
  protection units which come as a switchboard
  ready to connect inverter cabling to. Have a
  look 

4
ABB CM-UFD.M33

• The ABB CM-UFD.M33 is a multifunctioning grid
  feeding monitoring relay. It trips the section
  switch that is connected between the distributed
  generation and the public grid allowing the
  distributed generation to disconnect in case of
  problems (e.g. unstable grid), faults, or grid
  maintenance. The device provides different
  monitoring services to detect 10-minutes average
  overvoltage, real time over- and under-voltage as
  well as over- and under-frequency. Additionally,
  monitoring of vector shift and ROCOF (rate of
  change of frequency) can be configured to trip
  the generation in a case of loss of mains.

5
ComAp InteliPro PV

• The ComAp IntelliPro PV is a very flexible
  interconnection and mains decoupling protective
  relay. With its extensive protective functions,
  it meets the strictest utility interconnection
  requirements and can be used in a large range of
  distributed generation applications.  This relay
  combines standard and optional features to
  protect decentralized energy investments. It is
  an ideal solution for smart applications due to
  its advanced communications, remote monitoring,
  and data logging.

6
Solar protection installer
7
BCJ Controls

• BCJ Controls - commercial solar network
  protection unit - switchboard manufacturing
  including protection relay anti-islanding and
  zero export devices. BCJ Controls is a solar
  technology company set up by ex-utility
  industrial sparkies. Between them they have a
  large amount of experience in electrical grid
  protection, as well as dealing with utilities on
  a day-to-day basis.
• At BCJ Controls we produce Secondary Protection
  Switchboards with solar protection relays for
  Commercial Solar over 30kW grid connections.

8
CONTACT US

• BCJ Controls
• 2,17 Lorraine St, Peakhurst NSW Australia 2210
• [phone]
• www.bcjcontrols.com.au