The Solar Protection Relay by BCJ Controls | Comap IntelliPro

1
Solar Protection Relay

• Subtitle

2
Title and Content Layout with List

• ABB REG630 Solar Protection Relay
• Schneider Easergy Micom p341
• Fanox SIL-G Protection Relay
• Zero Export Controls CEC2000
• Zero Export Controls CEC3000
• Zero Export Devices ZED 1, 2, 3, 4 GNT
  Engineering
• MFR300 Multi-function Relay

3
ABB REG630 Solar Protection Relay

• The ABB REG630 Protection Relay is a zero export
  protection relay often used for solar PV embedded
  generation.
• REG630 is a comprehensive generator management
  relay for protection, control, measurement and
  supervision of small and medium-sized power
  generators and generator-transformer units in
  utility and power distribution systems.
• REG630 is a member of ABBs Relion product family
  and a part of its 630 product series. The 630
  series relays are characterized by functional
  scalability and flexible configurability. REG630
  has been designed to be the main protection for
  synchronous generators, offering full protection
  during start-up and normal run for both the
  generator and the prime mover. REG630 is
  typically used in small and medium-sized diesel,
  hydroelectric, combined heat and power (CHP), and
  steam power plants.

4
ABB REG630 Solar Protection Relay

• The pre-defined configuration is intended for
  directly connected generator sets and can either
  be used as such or easily tailored to
  application-specific requirements with freely
  selectable functions.
• REG630 can be used in either single or
  double-busbar applications with one or two
  breakers and numerous switching devices. It also
  supports a substantial number of both manually
  and motor-operated disconnectors and earthing
  switches. REG630 can therefore be used to control
  various types of switchgears.
• REG630 fully supports the IEC 61850 standard for
  communication in substations and covers both
  vertical and horizontal communication, including
  GOOSE messaging with both binary and analog
  signals. REG630 also supports the DNP3 (TCP/IP)
  and IEC 60870-5-103 (serial) communication
  protocols. The supported communication protocols,
  including IEC 61850, offer seamless connectivity
  to various station automation and SCADA systems.

5
Why ABB?

• Flexible generator protection relay for
  synchronous generators
• Differential protection, 3rd harmonic-based
  stator earth-fault protection, reverse power
  protection and extensive interconnection
  protection for distributed generation
• Control of two circuit breakers and a total of
  eight disconnectors and earthing switches
• Freely configurable functionality to meet
  application-specific requirements
• Large, integrated or detached HMI

6
Shneider Easergy MiCom p341

• Easergy MiCOM P341 Interconnection protection
  relays can be customized to meet the specific
  needs of the intended application. They offer
  complete, cost-effective and highly reliable
  protection for operating machines. It also
  includes Dynamic Line Rating (DLR) protection to
  optimize transmission line capacity. Gains of 50
  or more can be achieved, depending on the
  environmental conditions, enabling more
  Distributed Generation (DG) such as wind farms to
  be connected to the grid by taking into account
  the real time weather conditions to calculate the
  line rating compared to using the fixed
  summer/winter line ratings. DLR is a cost
  effective alternative to reinforcing overhead
  lines to increase capacity and there are also
  benefits to the wind farm owner in that higher
  revenues can be made with a higher line rating.

7
Shneider Easergy MiCom p341

• Extensive multi-functions and user-friendly logic
• Multi-function relay range ensures flexible,
  reliable integration of protection, control,
  monitoring and measurements for a wide variety of
  system applications
• Users can create complex protection schemes by
  using Easergy MiCOMs powerful, user-friendly
  logic
• Quality choice of industry standard protocols are
  available, facilitating integration into both new
  and existing network control systems
• Flexible communications and cost-effective
  solutions
• Easergy MiCOM relay familys extensive protection
  functions meet the requirements for most
  interconnection and DLR protection applications
  and provide them with cost-effective solutions
  and offers flexible communications options
• Latest communication protocols Ethernet
  Redundancy (available now in P341)

8
Shneider Easergy MiCom p341

• Fully Equipped with the latest communications
  protocols (IEC61850 Ed1 Ed2 available in the
  same device, selection by setting)
• Maximum availability and reliability of Ethernet
  communications thanks to the implementation of
  PRP/HSR standard redundancy protocols with an
  instantaneous recovery time in case of network
  failure
• Dual IP address allows the device to be connected
  to 2 independent communication networks (e.g,
  SCADA system network Maintenance network)
• Universal IRIG-B input (automatically detects
  modulated or unmodulated signal)
• Major enhancement to Cybersecurity
• Operational Cyber Security, compliant to IEC
  62351, helps protect installations with security
  based on embedded features such as Role Based
  Access Control (RBAC), Port Hardening, Security
  Logs and Access Traceability. The IED by default
  includes RBAC with different users defined and a
  Security Administrator.

9
Fanox SIL-G

• Protection functions available in SIL-G are the
  following
• 81R, 78, 81 U/O, 27P, 32/40, 59P, 59N, 25, 79,
  50P, 50N/G, 67P, 67N, 46, 79, 50BF, 52, 49,
  86,CLP, 49T, 74TCS, 37 and IRIG-B
• Monitors differences in voltage magnitudes, phase
  angles, and frequencies to perform synchronism
  checks across the circuit breaker, can be
  coordinated with the auto-reclose function (up to
  five recloses)
• Used with auxiliary power supply (110-230 Vac/
  90-300 Vdc and optionally 24-48 Vdc)
• Two rear ports on the back for remote
  communication
• Two communication protocols can be used
  simultaneously MODBUS RTU and IEC 60870-5-103,
  IEC 61850, DNP 3.0 or IEC 60870-5-104

10
Fanox SIL-G

• Physical Features
• Metallic box with high electromagnetic
  compatibility level (EMC) and wide range of
  operating temperatures
• Direct signalling/control on both of the circuit
  breakers(52 function) and both of the reclosers
  (79 function)
• Reduced size makes the SIL-G relay easy to
  install and its light weight helps the customer
  to save costs in transport
• 8 configurable inputs and 7 configurable outputs
• 2 Oscillographic records, 20 fault reports and
  non-volatile RAM memory stores 1.000 events with
  date/time even without power supply thanks to its
  internal RTC

11
CEC2000

• Real time data interface
• Configuration page has adjustable parameter
  settings to suit the requirements of any network
• Zero Export to grid
• Mechanically isolated
• Six switching points
• Export/Import Value Enabler
• Anti-islanding
• Ovevoltage and undervoltage protection
• Under- and Over-frequency protection
• Phase Failure Protection
• Reverse Power Protection
• ROCOF (rate of change of frequency)
• Phase rotation detection
• Error messages on faults
• Email alerts
• Self Calibrating
• Real time clock
• Internal battery backup
• Internal watchdog

12
CEC3000

• Real time data user interface
• Configuration page with adjustable parameter
  settings to suit the requirements of any network
• Zero Export to grid
• Mechanically isolated
• Six switching points
• Export/Import value enabler
• Export Allows controlled export to the grid as
  per the utility agreement (i.e. 100 kW approval
  with 20 kW allowable export)
• Import Satisfies need of a required minimum
  import of electricity to the site that some
  systems need

13
CEC3000

• Monitors and logs data (i.e. KVA, Voltage,
  Current, Power factor, frequency etc.)
• Real time data mobile viewing
• Collect and store data on off site server for 10
  years
• Anti-islanding
• Overvoltage and undervoltage protection
• Under- and over-frequency protection
• Phase Failure Protection
• Reverse Power Protection
• ROCOF (rate of change of frequency)
• Phase rotation detection
• Error messages on faults
• Email alerts
• Self Calibrating
• Real time clock
• Internal battery backup
• Internal watchdog
• Multi layer password protection
• USB and lan ports
• Used with all inverter brands

14
ZED Relays

• Inverter Control/Solar PV Production
• The ZED devices communicate with the inverter via
  three (3) protocols, the choice of protocol is
  dependent on specific inverter compatibility.
  These protocols are 4 or 6 bit binary and RS 485
  protocols. The 4 bit binary provides 16 levels of
  solar PV production between 0 and 100. The 6 bit
  binary provides 64 levels of solar PV production
  between 0 and 100.
• RS 485 provides solar PV production in 1
  increments.

15
ZED Relays

• 2.1 Compatible Inverters
• There is a range of inverters that are compatible
  with the ZED family of devices can manage Solar
  PV production and deliver Zero Export.Inverters
  which can be controlled via 4 or 6 bit binary
  will require a management card supplied by the
  manufacturer of the inverter these are often
  referred to as Power Control Modules, Power
  Management Units, Data Managers or
  controllers.Inverters that have RS 485/Modbus
  connection are managed via inverter specific
  protocols.Inverter performance and compatibility
  with the ZED family has been validated by GNT
  Engineering.
• To date a number of inverters have been validated
  by GNT Engineering and are managing Zero Export
  solutions for 3 phase and single phase
  installations.

16
ZED Relays

• 2.2 Inverter List
• 4 Bit Binary  Fronius, SMA, Solar Edge, ABB
  ZeverSolar6 Bit Binary FroniusMODBUS RS485
  ABB, Schneider, Fronius,GoodWe, Delta, Omnik,
  Samil ZeverSolarUnder Development

17
MFR 300

• Other Solar Protection Relays are available here
• The MFR 300 is a measuring transducer for
  monitoring single-phase and three-phase power
  systems. With both voltage and current inputs in
  order to allow this relay to measure an
  electrical power source. A digital processor
  carefully measures true RMS values, despite
  harmonics, transients, or disturbing pulses. Both
  the primary measured and the calculated values
  may be transmitted using the CAN open interface
  to a managerial control system. The MFR 300 looks
  at mains decoupling with various monitoring
  functions that include two time-dependent, freely
  configurable, undervoltage tracking functions for
  FRT and STI. The real, reactive, and apparent
  power and the power factor values are calculated
  using the primary measured values of voltage and
  current.

18
MFR 300 Features

• Three true RMS voltage inputs Three true RMS
  current inputs Class 0.5 accuracy for voltage,
  frequency, and current Class 1 accuracy for
  real and reactive power or energy Configurable
  trip/control set points Configurable delay
  timers for individual alarms (0.02 to 99.99 s)
  Four configurable relays (change-over)
  Ready-for-operation relay 2 kWh counters (max.
  1012 kWh) 2 kVARh counters (max. 1012 kvarh)
  Programmable relay outputs to annunciate alarms
  CANopen communication Configurable via CAN
  bus 24 VDC power supply

19
MFR 300 Protections

• Over- and under-voltage Over- and
  under-frequency Voltage asymmetry Overload
  Rev/red power Unbalanced load Phase shift
  Rate of change of frequency Freely configurable
  time-dependent undervoltage monitoring for FRT
  (fault ride-through) and STI (short-time
  interruption)

20
BCJ Controls

• BCJ Controls - commercial solar network
  protection unit - switchboard manufacturing
  including protection relay anti-islanding and
  zero export devices. BCJ Controls is a solar
  technology company set up by ex-utility
  industrial sparkies. Between them they have a
  large amount of experience in electrical grid
  protection, as well as dealing with utilities on
  a day-to-day basis.
• At BCJ Controls we produce Secondary Protection
  Switchboards with solar protection relays for
  Commercial Solar over 30kW grid connections.
• We offers installation, testing, commissioning,
  also we have a different protection relays. Call
  us [phone].

21
BCJ Controls

• 2,17 Lorraine St, Peakhurst NSW 2210
• http//bcjcontrols.com.au/