Power Substation Transmisson and distribution

1
INDIA Belive Smart Power Transmission and
Distribution Sabco Bijlee Milegi Hum Dekarke
Rahenge
Presentation on Best Practice for Electrical
Equipment Installation and Safety of
Product(Earthing Protection)Follow IEEE80
2
Electric Power Systems for Indian Modern Rolling
Stocks
Generation Transmission Distribution
Consumption
Generation
Transmission
Distribution
Load
3
(No Transcript)
4
Grid/Earth Mat Design
5

• Designing of Grid Earthing for Power
  Transmission Distribution Substation World
  follow Electrical Safety as per IEEE80
• Use of Copper Clad Steel for Mesh , Copper Bonded
  Solid Rod Earthing ,Exothermic Joints for all
  Burried Connections.

6

• Continue-2

7

• Continue -3

8

• Continue - 4

9

• Continue-5

10

• Continue-6

11

• Continue-7

12
(No Transcript)
13
(No Transcript)
14
(No Transcript)
15
My Gudget My Confidence My Safety
16
(No Transcript)
17
(No Transcript)
18
External/Internal Surge Source
19
An Arcing Fault is the flow of current through
the air between phase conductors or phase
conductors and neutral or ground. Concentrated
radiant energy is released at the point of arcing
an a small amount of time resulting in Extremely
High Temperature.
20
(No Transcript)
21
Fire Accident Reason Lose Contact Earthing
Disorder and Lightning
22
Sikhana to Padega Hi Follow NBC2016
23
Surge in Systems and Result
24
(No Transcript)
25
Maintenance Free - Equipment Earthing
26
33KV Electrical Sub Station as per IEEE 80
27
JMV LPS Products
28
Copper Cladded Conductor For Electrical
Installation
The Copper Clad Steel Grounding Conductor is made
up of steel with the coating of 99.99 pure
copper. These conductors/ wires or strands are
equipped with the strength of steel with the
conductivity and copper with the better corrosion
resistance property. The concentric copper
cladding is metallurgic ally bonded to a steel
core through a continuous, solid cladding
process using pressure rolling for primary
bonding. The copper cladding thickness remains
constant surrounding steel. We use different
steel grades for the steel core result in Dead
Soft Annealed, High strength and Extra High
Strength Characteristics.  The Copper Clad Steel
Wire yields a composite conductivity of 21, 30
and 40 IACS, and available in Annealed and Hard
drawn. We are delivering products with varied
conductivity and tensile strength as per the
customer need. Further, the wire can be processed
to be silver plated or tinned copper clad steel
wire.
29
Most Efficient Joint Process/Fail Proof
It is efficient and superior to all existing
surface to-surface mechanical retention
connectors.
30
What is Exothermic Welding System Copper to
Bi-Metal and Alumenium

• Types of Exothermic Joints
• Possible to join any bi metal except aluminum
• Exothermic welding is a process of making
  maintain free highly molecular bonding process is
  superior in performance connection to any known
  mechanical or compression-type surface-to-surface
  contact connector. Exothermic weld connections
  provide current carrying (fusing) capacity equal
  to that of the conductor and will not deteriorate
  with age.
• It offers Electrical connections between two or
  more copper to copper and copper to steel
  conductors.
• Highly portable method as it does not require
  any external power source or heat source, so it
  can be done almost anywhere.
• It provides strong permanent molecular bond
  among metallic conductors that cannot loosen and
  further will not deteriorate with age.
• Connection does not corrode with time and it
  offers permanent conductivity.

31
Copper Clad Steel Solid ROD and Conductor
32
(No Transcript)
33
(No Transcript)
34
(No Transcript)
35
(No Transcript)
36
JMVs Clients
37
Contact Professionals for Advise
38
We Protect You Use Electrical SafetyEarthing
Protection
39
Contact our Team JMV INDIALeader and
Insperation behind Mr.Neeraj Saini
neeraj_at_jmv.co.inMr.Mahesh Chandra Manav Brand
JMV HOD manav_at_jmv.co.inwww.jmv.co.inMoblie
-919910398999Telecom -9191204590000