BlueLog Data Logger | Comap MainsPro | BlueLog

1
Blue'Log Data Logger
2
BlueLog X-Series
3
Blue'Log Data Logger

• The data loggers record all data from PV systems
  centrally and ensure compliance with the national
  and international requirements of grid operators
  along with country-specific feed-in regulations
  according to the system size.
• The new generation results from the continued
  development of the WEBlog series and offers
  useful new functionality and a flexibly
  extensible system to meet the requirements of the
  future energy landscape.
• The X-Series sets new standards in areas
  including safety, installation, maintenance,
  usability and networking of web portal, and data
  logger.

4
How It Is Get Connected
5
Benefits

• Cost reduction due to modular system
• Timely commissioning with quick-start wizard
• Lower monetary commitment due to efficient
  warehousing one device to meet every requirement
• Time-saving support with live access over a
  secure connection
• Future ready through hardware modularity and
  regular firmware updates
• Security from encryption and prepared for future
  security requirements
• Lower costs due to mixed mode inverter operation
  with different manufacturers
• Better return on investment through fulfillment
  of all regulatory requirements for trading on
  electricity market

6
Blue'Log X-Series Specifications

• Supply voltage 20 - 60 V DC
• Current consumption typically 5 W
• Operating temperature -20 - 70C
• Protection class IP 20
• Dimensions 110 x 148 x 63 mm
• InstallationWall installation, Top-hat rail
  installation in electrical distribution board, in
  control cabinets
• Modem Ethernet connection (10 / 100 MBit)

7
Blue'Log X-Series Specifications

• Display/operation1 x display (291 x 118
  pixels)3 x LED2 x operating buttons 1
  directional pad1 x reset button3 x DIP switches
  for bus termination
• Communication2 x RS485/RS422 (auto-detection)1
  x CAN4 x digital/analog inputs (dry contact, S0,
  voltage input (0 - 24 V, 0 - 1 V, 0 - 100
  mV)current input (0 - 20 mA), PT1000,
  configurable via software)4 x digital outputs
  (open collector max. 60 V/100 mA or voltage
  output max. 200 mA configurable via software)4
  x digital inputs (dry contact, for e.g. ripple
  control receiver, S0, configurable via software)

8
VCOM Web Interface

• The VCOM (Virtual Control Room) provides a
  performance overview of your entire system
  portfolio worldwide in a straightforward manner
  and available at all times. In the event of a
  breakdown, faults are quickly located and
  rectified very efficiently. The web-based user
  interface can be adjusted exactly for your needs
  for each specific workflow.

9
Safer'Sun Web Interface

• The data recorded by the system data logger is
  transmitted to the meteocontrol servers and
  compared on saferSun Professional with simulated
  values for the expected energy production. These
  values are calculated from the configuration of
  the system and the present weather conditions.
  Significant inconsistencies trigger an alarm
  automatically via email or text message.
  saferSun Professional allows analyses in full
  depth and simple configuration of all alarm
  criteria to safely operate a PV system.

10
BCJ Controls

• BCJ Controls is a solar technology company set up
  by ex-utility industrial sparkies. Between them
  they have a large amount of experience in
  electrical grid protection, as well as dealing
  with utilities on a day-to-day basis.
• BCJ Controls - commercial solar network
  protection unit - switchboard manufacturing
  including protection relay anti-islanding and
  zero export devices
• BCJ Controls helps solar installers navigate the
  grid connection process to get the system on-line.

11
VISIT MY WEBSITE

• http//bcjcontrols.com.au/