Technical Concrete Cutting

1
Commercial Flooring

• Install an Epoxy Coating on Garage Floor?

2
Part - I

• Preparing the Floor

3
Determine if the floor has a coating on it.
4
Look for oil or grease stains
5
Look for rubber residue from tire scuffing.
6
Test random areas for other, undetected sealers
or coatings by taking a small cup of muriatic
acid mixed at a ratio of 4 parts water to one
part acid
7
Part - II

• Etching the Floor

8
Get a cleaner for etching
9
Presoak the floor
10
Mix one gallon of mixed acid/water solution (4
water 1 acid)
11
Rinse entire floor well
12
Allow the floor to dry completely
13
Part - III

• Coating the Floor

14

• Select the product you will use to coat your
  garage floor.
• Calculate the amount of material required to do
  your project.
• Install the coating.
• Design it, if desired.

15
Part - IV

• Finishing Up

16

• Dispose of your used materials.
• Allow the epoxy to cure completely.
• Observe the re-coat times carefully.

17

• Concrete Repair
• Commercial Flooring
• Concrete Sealing
• Concrete Grinding
• Concrete Cutting

• Call 0447 766 773!
• Area Serving Brisbane, Gold Coast