Top 10 Safety Tips To Handle Heavy Machinery

1
Top 10 Safety Tips to Handle Heavy Machinery

• Welding Equipments in Canada

Presented By- http//www.everlastwelders.ca
2
If your business is to deal with heavy equipment
such as the equipment used in constructing,
mining, forestry, farming and other industries is
quite big and powerful and those reasons are
inherently dangerous. We are very well aware of
the hazards associated with the handling of the
big machines such as plasma cutters and or
stainless steel welder. You need to take caution
when you handle plasma cutters or equally heavy
equipment. Here are ten such safety tips to
handle heavy machinery -
Presented By- http//www.everlastwelders.ca
3
1. Make sure you need the proper training before
handling such heavy equipment. You need to know
how a machine operates and best method to check
is to review the manufacturer's operation
maintenance manual. Check for the best plasma
cutter in Canada manuals when you handle the
same. 2. When you handle heavy machinery like a
stainless steel welder, make sure no people are
there in the operation area and avoid any chances
of injury.
Presented By- http//www.everlastwelders.ca
4
3. The construction site workers must always wear
safety gears like hard hat, goggles, and fall
gear to reduce the chance of risks. 4. You must
be aware of the blind spot in the equipment
whether you are an operator or just a worker. 5.
When you are operating a heavy machine, make sure
that you have worn the seat belt. Though it is
more applicable in case you are driving a
construction vehicle. 6. Do not climb or get off
the equipment when it is moving.
Presented By- http//www.everlastwelders.ca
5
7. Communication is the key to safety. So you
need to have well designed communication system
like walkie-talkie or two-way radios when you are
handling heavy equipment such as plasma cutter.
8. Never exceed the load limit of particular
machinery. Do not overload or else high risks
will be associated. 9. Look for cracks, proper
electrical connection and other damages before
you start operating the machinery in equipment
like stainless steel welder. 10. When you are
operating a machine make sure that you have
checked the power lines, overhead clearances, or
underground utility lines to run the devices
safely.
If you have any more exciting tips to share and
increase safety measure while one is operating
devices like the plasma cutters, then you are
free to do in the comment box below.
Presented By- http//www.everlastwelders.ca
6
Contact Us

• Everlast Welders
• Address - 2-750 Darlene Court Burlington,
  Ontario, Canada, L7L5Y9
• Phone No 9056371637
• Fax [phone]
• Website - http//www.everlastwelders.ca