Proper Furnace Repair & Installation Guarantees Efficiency

1
Proper Furnace Repair Installation Guarantees
Efficiency
2

• The furnace is a device for high-temperature
  heating it is very different from a heater in
  that the heater is a heating device while a
  furnace is a device that produces heat from a
  closed chamber.

3

• A Furnace can be classified into two broad
  appliances an industrial furnace used for very
  high-temperature heating and domestic furnaces
  used mostly for warming up homes also known as
  domestic furnaces. Domestic furnaces are of
  various types usually named depending on the fuel
  it uses which are gas, oil, wood, biomass and
  electric.

4
Gas-fired furnace system

• The gas-fired unit uses natural air or liquefied
  petroleum gas(LPG). The process starts when a
  thermostat installed in rooms to be heated senses
  temperature is below set, this causes an inducer
  fan to start and blow air through air ducts to
  the burning chamber after sufficient air is blown
  into the chamber.

5
(No Transcript)
6

• A gas valve is trigged, opening gas to run
  through the burners. In modern versions, a sensor
  will trigger a spark to ignite the gas, the
  furnace will run for at least two minutes before
  the blower fan starts to run to avoid blowing
  cold air into the ducts.

7

• The size of the furnace to heat a home is
  variable depending on the size of the house a
  gas furnace has an input rating expressed in btu
  per hour, common sizes range from 40000, 60000,
  80000, 100000, and finally 120000 btu/hr.

8

• Fora furnace repair and installation to be
  effective a load calculation should be performed
  to determine the right unit a specific home. Gas
  furnaces with one heat exchanger has less
  efficiency of up to 80, mostly in older models,
  newer units have two heat exchangers giving an
  efficiency of at least 90 and

9

• The ideal gas furnace should have variable motor
  speed to vary the speed of the blower motor
  depending on temperature variations, thus saving
  electric energy. Other furnaces include oil
  fired, corn burning and electric furnaces,
  electric furnace is determined in kilowatts

10
Furnace repair installation

• The efficiency of any furnace over and above its
  type mainly depends on the installation. Its load
  calculation is done accurately, and proper
  installation is done when the peak efficiency of
  the system can be attained.

11
(No Transcript)
12

• Consulting professionals for furnace repair
  installation will not only ensure warm house
  rooms, but it will also save you money in the
  long run. At Air 1, proper guidance is given to
  our clients considering the availability of fuel
  to run the furnace. Furnace installation is a
  compact deal as it will include after sales
  service.

13

• Maintenance guide should be properly adhered to,
  failure to which carbon monoxide may be released
  in the rooms, moving parts of the furnace should
  be lubricated periodically,

14

• as hot air is blown into the air ducts is
  accompanied by moisture which should be drained
  properly, and its ways kept clean to avoid
  clogging. Efficiency tests should often be
  carried to determine faulty components or worn
  out parts for repair.

15

• For More Information, Visit Us

http//www.airone360.com/