Few Steps to Pressure Wash - PowerPoint PPT Presentation

About This Presentation
Title:

Few Steps to Pressure Wash

Description:

Check out the following steps to learn pressure washing your home's siding, a concrete driveway, wood or brick decking, and more. – PowerPoint PPT presentation

Number of Views:67

less

Transcript and Presenter's Notes

Title: Few Steps to Pressure Wash


1
  • Few Steps to Pressure
  • Wash

2
Step 1
  • Choose a pressure washer that fits your needs.
  • Pressure washers can be rented at a daily rate
    from most equipment rental stores and some
    hardware stores.
  • A low-pressure model is better suited to more
    delicate surfaces like aluminum siding, while
    high-pressure models are great for concrete and
    brick.

3
Step 2
  • Read the User Manual fully.
  • Pressure washers can cause damage to your home,
    as well as present a danger to yourself if used
    improperly.
  • The owner's manual will contain important safety
    and operating information.

4
Step 3
  • When pressure washing a deck, for example, make
    sure to remove any plants or light fixtures that
    could be damaged by the heavy spray of water.

5
Step 4
  • Connect the pressure washer to your home's
    spigot.
  • Set the machine up according to the manual's
    instructions this will usually involve running a
    garden hose from your spigot into the pressure
    washer.

6
Step 5
  • Before using the pressure washer, make sure to
    wear safety glasses, ear plugs, and heavy work
    gloves.

7
Step 6
  • Attach the Spray tip to the pressure washer.
  • Pressure washers generally come with an
    assortment of spray tips that can be affixed onto
    the end of the spray wand, these spray tips
    adjust the angle of the spray.

8
Step 6
  • Turn the pressure washer on and begin washing
    your surface.
  • Hold the wand at about a 45 degree angle to the
    surface you are cleaning.
  • Keep the spray wand in motion at all times,
    working primarily with a gentle back-and-forth
    motion.Apply detergent with a wide-angle spray
    tip before proceeding to a higher pressure
    setting.
  • Wash the surface again with a narrower-angle
    spray tip. Use the pressure washer to clean the
    surface as before, keeping the spray wand in
    constant motion.

9
Step 7
  • Allow the surface to air dry.
  • After washing the area to your satisfaction, turn
    the pressure washer off and disconnect it from
    your spigot. Allow the work area to dry in the
    air.

10
Need Pressure Washing Cleaning Services across
Surrey, London and Surrounding Counties? Visit-
http//www.pressurewashingcleaning.co.uk/
Write a Comment
User Comments (0)
About PowerShow.com