Dust Collector - PowerPoint PPT Presentation

About This Presentation
Title:

Dust Collector

Description:

It is imperative to select the best type of dust collection system to maximize the gathering process. Before selecting and installing a dust collector, the cement manufacturing plant must be examined to detail. The sizing of the waste removal equipment must be based on the size of the particulates, the properties of these wastes, temperature, flow rate of these particles and the moisture content. When inertial separators are used, it must be ensured that the applied force is enough to collect most of the waste materials. These separators use centrifugal, inertial and gravity. For settling chamber type, the particulate must be provided with adequate space to settle and distil. For cyclone separators, the centrifugal force must provide enough energy to remove all wastes. – PowerPoint PPT presentation

Number of Views:1810
Slides: 9
Provided by: techflownet
Category: Other

less

Transcript and Presenter's Notes

Title: Dust Collector


1
(No Transcript)
2
Introduction Cement Manufacturing
The cement industry is one of the most vibrant
and critical industry in the world.
As it is said, friendship is the cement that
holds the world together.
The industry supply building materials used in
almost all type of constructions. To highlight
its importance, no commercial, residential,
airports, rail terminus and marine ports can
exist without this product.
During the manufacturing of clinker, this dirt is
usually produced. It is usually comprised of ash,
particulate from clinker, calcium carbonates,
halides, volatile chemicals, alkalis, sulphates
among other constituents.
3
Impacts on Health and Environment
The powder produced in these factories is
dangerous to human health.
It causes respiratory illnesses such as asthma,
bronchitis and coughing. It also results to
cancer in the long run
The dust also causes serious environmental
pollution such as air and water pollution.
4
Issues With Current Collection Methods
Current industries have many issues in
controlling fine particulates emitted from the
clinker. First and foremost, most of these
systems are not able to recover all the dirt and
remove particulate free air.
Another issue is that the chemical composition of
this material corrodes the collectors and this
affects their operation. The emission of sulphur
results to increased acidity which corrodes
metallic parts.
5
Solutions to Collection Issues in Cement Industry
To circumvent these problems, the particulates
must be captured and recycled back to the
production process.
First and foremost, it is imperative to select
the best type of dust collection system to
maximize the gathering process.
Before selecting and installing a dust collector,
the plant must be examined to detail.
6
Features of Dust Collector
When inertial separators are used, it must be
ensured that the applied force is enough to
collect most of the waste materials.
These separators use centrifugal, inertial and
gravity.
For settling chamber type, the particulate must
be provided with adequate space to settle and
distil. For cyclone separators, the centrifugal
force must provide enough energy to remove all
wastes.
7
Title
Contact Us
Techflow Enterprises Pvt. Ltd. Address- 10,
Gopal Industrial Estate,
B/H Harshad Chambers, Odhav Road,
Ahmedabad -
382415 Gujarat, INDIA
Phone-
91-79-22872390 / 91-79-22970414
Email-
info_at_techflow.net

8
Title
Techflow Enterprises Pvt. Ltd.
Write a Comment
User Comments (0)
About PowerShow.com