Chamber Design Status

1
Chamber Design Status

• ME 234/2 Chambers
• Design Drawings Complete and Released -
  Production Parts being Ordered
• Changes to Frame and Cable Drawings are Expected
  as Designs are not Finalized
• ME 234/2 Tooling
• Design Drawings Complete and Released except as
  noted
• Panel Transport and Storage Box (Cleaning
  Machine _at_ Aurora to MP9) Currently being
  designed. Should complete design and order by
  mid January.
• Chamber Shipping Containers Should complete
  design and order by mid February.
• MP-9 Panel Vacuum Lifting and Handling Equipment
  No drawings required System is on order and due
  in early January.
• No documentation currently exists for Soldering
  Machine An effort to document design and
  construction expected to be started in January,
  2000 (Anticipate duplicate machines may be
  required for IHEP and PNPI).
• Purdue to provide Drawings and Operating
  Procedures for Tension and Wire Spacing Test
  Equipment by beginning of January, 2000
• Major Manufacturing Tooling is in place and
  Operational.
• At least one set of all other tooling is
  available and ready for use Additional Carts,
  Tables, Support Brackets, and Consumables needed
  for larger scale production are on order.

2
Chamber Design Status

• ME 1/2 Chambers
• Prototype design drawings complete released
  Some Chamber drawing changes are required to
  update designs to Production Ready
  configurations.
• Changes to Frame, Cable and Assembly Drawings are
  expected as these designs are not finalized.
• Parts have been procured for 2 prototype chambers
  plus 1 anode panel. Assembly of 1st. Prototype
  is in process A few parts are yet required are
  due soon.
• Production Ready Drawings to be completed in
  January Orders for Chamber Specific Production
  Parts to be placed at that time.
• ME 1/2 Tooling
• Design drawings have been completed and orders
  have been placed for the following items
• Winding Machine including Combs
• Tape Glue Dispenser
• Ionized Air Cleaner
• One Panel Cart with one Set of Panel Supports
• One Chamber Cart with one set of Chamber Supports
• Three sets of Wire Fixation Bar Protective Strips
• Tension Tester under development at Purdue.
• Remainder of Tooling Needs under discussion.

3
Chamber Design Status

• ME 2/1 Chambers
• Final Design is Complete and All Chamber Drawings
  Released
• Changes to Frame, Cable and Assembly Drawings are
  expected as these designs are not finalized.
• A Kit consisting of one set of Prototype Chamber
  Parts and the Tooling listed below is being
  prepared for shipment to PNPI.
• Requests for Quotations of all Non-Common
  Production Parts now being placed.
• ME 2/1 Tooling
• Design drawings have been completed and orders
  have been placed for the following items, most of
  which have been assembled at MP-9
• Winding Machine including Combs
• Tape Glue Dispenser
• Ionized Air Cleaner
• One Panel Cart with one Set of Panel Supports
• One Chamber Cart with one set of Chamber Supports
• Three sets of Wire Fixation Bar Protective Strips
• Tension Tester under development at Purdue.
• Remainder of Tooling Needs under discussion

4
Chamber Design Status

• ME 3/1 Chambers
• To Complete Design and Release for Ordering by
  2/1/00.
• ME 3/1 Tooling
• To Complete Design and Release for Ordering of
  the following Unique Required Tooling by 1/1/00
  
• Winding Combs
• Panel Support Brackets
• Chamber Support Brackets
• Wire Fixation Bar Protective Strips
• ME 1/3 Chambers
• To Complete Design and Release Chamber
  Components by 2/1/00 and Assemblies by 2/15/00.
  
• ME 1/3 Tooling
• To Complete Design and Release for Ordering of
  the following Unique Required Tooling by 2/1/00
  
• Winding Combs
• Panel Support Brackets
• Chamber Support Brackets
• Wire Fixation Bar Protective Strips

5
Chamber Design Status