Using the HP ScanJet 2200c

1
Using the HP ScanJet 2200c

• Continuing Studies CS 38
• Stanford University

2
Step 1 Place original on the glass
Place the original to be scanned face-down on the
scanner bed. Center the original with the top
edge closest to the front of the scanner bed
(i.e., upside-down).
3
Step 2 Launch HP Precision Scan LTX
4
Step 3 Under Settings, choose Resolution and
change the resolution if desired
5
Step 4 Click Start a new Scan
Be patient it may take a minute for the scanner
to warm up.
6
Step 5 Click and draw a box around the object.
Unless your original fills up the entire glass
area of the scanner, draw a box around your
picture so only the picture will be saved.
7
Step 6 In the Where do you want the scan to go
field, choose File
8
Step 7 Click Output Type to ensure the scanner
is choosing the correct type of scan.
9
Step 8 Click Output Size to ensure the size of
the image meets your needs. Change Units to
Pixels.
10
Step 9 Click Save the scan now
11
Step 10 Save the image

• In the Save in field, change to the floppy drive
  (or wherever on your hard drive you are storing
  your images)
• Change the Save as type to BMP, JPEG or GIF (BMP
  is the native Windows file format - cant be
  used on a web pageso youll have to eventually
  convert it to either JPEG or GIFJPEG is best
  for photographs GIF is best for line art and
  cartoons)
• Enter a file name, and press Save.

12
Step 10a If you have chosen JPEG, enter the
compression level
Step 11 Wait for the scanner to finish
When the progress meter has completed, your image
should now be on your floppy disk.